☆ 4.7 Article

Dual conductive network of nickel-coated carbon fiber woven fabric for indirect and direct lightning strike protection of carbon fiber reinforced polymer composites

POLYMER COMPOSITES (2022)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Ni@CNTs/Al2O3 Ceramic Composites with Interfacial Solder Strengthen the Segregated Network for High Toughness and Excellent Electromagnetic Interference Shielding

Guolong Sang et al.

Summary: In this study, nickel@multiwalled carbon nanotubes/ alumina (Ni@ CNTs/Al2O3) ceramic composites with segregated structures and electric/magnetic-coupling networks anchored by CNTs and magnetic Ni nanofillers were prepared by hot-press sintering. The composites exhibited excellent electromagnetic interference (EMI) shielding effectiveness (SE) and reliable mechanical properties in harsh environments and low filling levels.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Engineering, Manufacturing

A controllable gradient structure of hydrophobic composite fabric constructed by silver nanowires and polyvinylidene fluoride microspheres for electromagnetic interference shielding with low reflection

Li Jia et al.

Summary: A flexible EMI cotton composite with low surface reflection and good hydrophobic performance was successfully fabricated using a simple dip-coating method. The composite material exhibited excellent EMI shielding properties and high strength.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Tailorable, Lightweight and Superelastic Liquid Metal Monoliths for Multifunctional Electromagnetic Interference Shielding

Yadong Xu et al.

Summary: A novel method for preparing liquid metal (LM) monoliths with 3D continuous conductive networks using expandable microspheres (EM) was proposed, resulting in lightweight yet strong structures with exceptional shielding effectiveness. The assembled monolith showed outstanding performance at an ultra-low content of LM and could be a promising universal design principle for multifunctional LM composites.

NANO-MICRO LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Ultralight, highly compressible, thermally stable MXene/aramid nanofiber anisotropic aerogels for electromagnetic interference shielding

Yiqian Du et al.

Summary: Researchers are focusing on improving the applicability of transition-metal carbon/nitride (MXene) shielding devices through integration with nanomaterials and polymers. By constructing an ultralight, conductive aerogel with strong interfacial interaction between MXene nanosheets and aramid nanofibers, the device shows excellent compressibility, superelasticity, and electromagnetic interference (EMI) shielding performance. Additionally, the aerogel has consistent thermal stability and flame retardant properties, making it suitable for various extreme conditions.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Integration of efficient microwave absorption and shielding in a multistage composite foam with progressive conductivity modular design

Yadong Xu et al.

Summary: This study successfully achieved compatibility between high absorption and shielding capability through progressive conductivity modular design, fabricating composite materials with excellent microwave absorption performance. These composite materials exhibit outstanding EMI shielding effectiveness and microwave absorption properties, showing promising applications in demanding electromagnetic environments.

MATERIALS HORIZONS (2022)

Add to Collection

Article Engineering, Manufacturing

Synergistically enhancing electromagnetic interference shielding performance and thermal conductivity of polyvinylidene fluoride-based lamellar film with MXene and graphene

Yanli Li et al.

Summary: A synergistic effect strategy is proposed in this study to construct a directly contacted conductive network in polymer layered film by utilizing MXene and graphene nanoplates. The composite film achieved synergistic enhancements in electrical conductivity, EMI shielding effectiveness, and in-plane thermal conductivity.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Multifunctional sandwich-structured magnetic-electric composite films with Joule heating capacities toward absorption-dominant electromagnetic interference shielding

Zhengzheng Guo et al.

Summary: In this study, a sandwich-structured EMI shielding composite film with Joule heating performance was fabricated using a feasible vacuum-assisted filtration method. The rational arrangement of impedance matching layer and shielding layer resulted in excellent EMI shielding effectiveness, flexibility, and mechanical property.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Electromagnetic asymmetric films comprise metal organic frameworks derived porous carbon for absorption-dominated electromagnetic interference shielding

Mushan Yuan et al.

Summary: In this study, cellulose-based double-layer composite films with excellent performance were prepared for electromagnetic interference (EMI) shielding. The films have the advantages of low thickness, high mechanical strength, and excellent absorption performance, making them suitable for absorption-dominated EMI shielding fields.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Materials Science, Composites

Absorption dominated high-performance electromagnetic interference shielding epoxy/functionalized reduced graphene oxide/Ni-chains microcellular foam with asymmetric conductive structure

Qiang Gao et al.

Summary: In this study, epoxy/functionalized reduced graphene oxide/Nichains microcellular foams with asymmetrical conductive structure were prepared through a thermal compressing method and then followed by a supercritical carbon dioxide foaming process. The resulting foams exhibited excellent electrical conductivity, EMI shielding effectiveness, and compressive strength, making them suitable for high-performance EMI shielding materials.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Composites

Multifunctional electromagnetic interference shielding 3D reduced graphene oxide/vertical edge-rich graphene/epoxy nanocomposites with remarkable thermal management performance

Liyuan Han et al.

Summary: This study successfully synthesized a unique three-dimensional hybrid carbon nanostructure by growing vertical edge-rich graphene on a reduced graphene oxide aerogel skeleton. The resulting nanocomposites, when used to modify epoxy resin, exhibit remarkable electromagnetic interference shielding and thermal management capabilities. This research holds great potential for future electronic packaging.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Composites

Constructing hierarchical structure via in situ growth of CNT in SiO2-coated carbon foam for high-performance EMI shielding application

Ben Huang et al.

Summary: Carbonated melamine foam (CMF) based hybrids with a three-dimensional structure, containing SiO2 and in-situ growth carbon nanotubes (CNT), have been synthesized for preparing polydimethylsiloxane (PDMS) composite with excellent electromagnetic interference (EMI) shielding and absorption effectiveness in the frequency range from 8.2 to 12.4 GHz. The high electrical conductivity and unique porous structure of the composite contribute to its superior EMI shielding performance, avoiding secondary EMI pollution.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Ag Nanoparticle-Coated Polystyrene Microspheres for Electromagnetic Interference Shielding Films with Low Metal Content

Hua Cheng et al.

Summary: This study successfully achieved high electromagnetic interference shielding effectiveness through the construction of a conductive network using silver nanoparticles and polystyrene microspheres. Stacking multiple films further enhanced the shielding performance.

ACS APPLIED NANO MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Flexible and lightweight porous polyether sulfone/Cu composite film with bidirectional differential structure for electromagnetic interference shielding and heat conduction

Hui Zhao et al.

Summary: The study successfully prepared a PCPES/Cu composite film with a bidirectional differential structure, which enhances EMI shielding performance and mitigates microwave reflection, with high shielding effectiveness and thermal conductivity enhancement; the material has extensive application prospects in aerospace, wearable electronics, and portable electronics.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Ni@CNTs/Al2O3 Ceramic Composites with Interfacial Solder Strengthen the Segregated Network for High Toughness and Excellent Electromagnetic Interference Shielding

Guolong Sang et al.

Summary: The study successfully prepared nickel@multiwalled carbon nanotubes/alumina (Ni@CNTs/Al2O3) ceramic composites with segregated structures and electric/magnetic-coupling networks, which effectively capture and attenuate electromagnetic wave energy and enhance fracture toughness synergistically. High-performance ceramic composites have been achieved with promising EMI shielding capabilities and high mechanical properties.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Engineering, Civil

In-plane compression response of woven CFRP composite after low-velocity impact: Modelling and experiment

Bin Yang et al.

Summary: A finite element model was developed to predict the low-velocity impact and compression-after-impact behavior of woven carbon fiber reinforced polymer composites. Experimental results validated the accuracy of the model, and detailed microscopic damage analysis was conducted on the composites. The effects of impactor diameter and impact energy on impact damage and CAI behaviors were discussed based on the model.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Materials Science, Composites

Nickel-coated nylon sandwich film for combination of lightning strike protection and electromagnetic interference shielding of CFRP composite

Huixin Zhu et al.

Summary: This paper reports the development of a highly conductive and cost-effective nylon filter/nickel (NFNi) sandwiched film for lightning strike protection (LSP) and electromagnetic interference (EMI) shielding. Experimental results showed that the NFNi film significantly reduced damage to CFRP composites during lightning strike tests, maintained high residual strength, and exhibited superior EMI shielding performance compared to copper mesh and buckypaper. The sandwich structure of the film enhanced reflection loss of electromagnetic waves, contributing to its excellent performance.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Composites

Multifunctional nickel-coated carbon fiber veil for improving both fracture toughness and electrical performance of carbon fiber/epoxy composite laminates

Hui Liu et al.

Summary: In this study, nickel-coated carbon fiber (NiCF) veil was explored as a functional interleaf of CFRP composites to simultaneously improve the interlaminar fracture toughness and through-thickness electrical conductivity. The toughening mechanisms of NiCF veils and the increase of conductive paths were studied in detail. The NiCF veil is a potential interleaf for structure-function integration and has the potential to suppress lightning damage to aerostructures.

POLYMER COMPOSITES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Improvement of impregnation quality on out-of-autoclave processed CFRP aircraft wing spar through resin flow simulation

Dong-Cheol Park et al.

Summary: VaRTM, a resin injection method applied in a vacuum environment, is influenced by constituent material characteristics and the design of resin inlet/outlet locations. Studies show that shorter inlet/outlet lengths can improve impregnation quality in the VaRTM process.

FUNCTIONAL COMPOSITES AND STRUCTURES (2021)

Add to Collection

Review Engineering, Multidisciplinary

Factors affecting direct lightning strike damage to fiber reinforced composites: A review

Vipin Kumar et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

Self-assembled reduced graphene oxide/nickel nanofibers with hierarchical core-shell structure for enhanced electromagnetic wave absorption

An Sheng et al.

CARBON (2020)

Add to Collection

Review Chemistry, Physical

Electromagnetic microwave absorption theory and recent achievements in microwave absorbers

Xiaojun Zeng et al.

CARBON (2020)

Add to Collection

Article Chemistry, Physical

Asymmetric conductive polymer composite foam for absorption dominated ultra-efficient electromagnetic interference shielding with extremely low reflection characteristics

Hongji Duan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Sesame-cookie topography silver nanoparticles modified carbon nanotube paper for enhancing lightning strike protection

Hetao Chu et al.

CARBON (2019)

Add to Collection

Article Mechanics

Lightning strike and delamination performance of metal tufted carbon composites

D. M. Lombetti et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Engineering, Manufacturing

Enhanced lightning strike protection of carbon fiber composites using expanded foils with anisotropic electrical conductivity

Yunli Guo et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Article Materials Science, Composites

Damage analysis of carbon fiber composites exposed to combined lightning current components D and C

Qi Dong et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Composites

Temperature-dependent thermal decomposition of carbon/epoxy laminates subjected to simulated lightning currents

Juhyeong Lee et al.

POLYMER COMPOSITES (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Gradient Structure Design of Flexible Waterborne Polyurethane Conductive Films for Ultraefficient Electromagnetic Shielding with Low Reflection Characteristic

Yadong Xu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Engineering, Aerospace

Experimental and numerical study on residual strength of aircraft carbon/epoxy composite after lightning strike

F. S. Wang et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Composites

Fabrication of an enriched graphene surface protection of carbon fiber/epoxy composites for lightning strike via a percolating-assisted resin film infusion method

Ben Wang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Coatings & Films

Thermal spray metallisation of carbon fibre reinforced polymer composites: Effect of top surface modification on coating adhesion and mechanical properties

A. Rezzoug et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Damage response of composites coated with conducting materials subjected to emulated lightning strikes

P. S. M. Rajesh et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Metallization of Carbon Fiber Reinforced Polymers for Lightning Strike Protection

Hanqing Che et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Lightning strike effect on carbon fiber reinforced composites - effect of copper mesh protection

T. M. Dhanya et al.

MATERIALS TODAY COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Physical

The combination of carbon nanotube buckypaper and insulating adhesive for lightning strike protection of the carbon fiber/epoxy laminates

Jin-hua Han et al.

CARBON (2015)

Add to Collection

Article Polymer Science

Coupled electrical-thermal-pyrolytic analysis of carbon fiber/epoxy composites subjected to lightning strike

Qi Dong et al.

POLYMER (2015)

Add to Collection

Article Engineering, Multidisciplinary

Carbon nanofiber paper for lightning strike protection of composite materials

Jihua Gou et al.

COMPOSITES PART B-ENGINEERING (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.