☆ 4.6 Article

Electrical and structural characteristics of fish skin gelatin as alternative biopolymer electrolyte

PHYSICA SCRIPTA (2022)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Study on novel biopolymer electrolyte Moringa oleifera gum with ammonium nitrate

R. Chitra et al.

Summary: A new class of environmentally friendly bio-based electrolytes has been synthesized from natural tree gum, with ionic salt as an additive to optimize ionic conductivity. The addition of salt enhances the amorphous nature of the membranes, with the composition of MG and 0.5 wt % NH4NO3 showing the highest degree of amorphous nature. The obtained solid polymer electrolyte achieves high ionic conductivity and a high ionic transference number, demonstrating the potential utility of natural tree gum as a successful electrolytic material.

POLYMER BULLETIN (2022)

Add to Collection

Article Polymer Science

Impact of lithium triflate (LiCF3SO3) salt on tamarind seed polysaccharide-based natural solid polymer electrolyte for application in electrochemical device

L. Sampath Kumar et al.

Summary: The research focuses on synthesizing and characterizing natural solid polymer electrolytes consisting of tamarind seed polysaccharide as the host polymer and lithium triflate as the ionic dopant. Various analysis methods were used to study the properties of the polymer electrolyte and its application in lithium ion conducting batteries.

POLYMER BULLETIN (2021)

Add to Collection

Article Chemistry, Physical

Nanocomposite polymer electrolytes comprising starch-lithium acetate and titania for all-solid-state supercapacitor

A. C. W. Ong et al.

Summary: A nanocomposite solid polymer electrolyte system has been prepared for use in a supercapacitor, with the addition of 4 wt.% TiO2 resulting in optimal conductivity. Characterisation using XRD and FTIR revealed changes in conductivity and surface morphology. The electrolyte with 4 wt.% TiO2 showed a stable electrochemical potential window and was used to assemble a supercapacitor for further performance characterization.

IONICS (2021)

Add to Collection

Article Polymer Science

Optimization of the Electrochemical Performance of a Composite Polymer Electrolyte Based on PVA-K2CO3-SiO2 Composite

Bashir Abubakar Abdulkadir et al.

Summary: The study optimized a composite polymer electrolyte (CPE) based on polyvinyl alcohol (PVA) polymer, potassium carbonate (K2CO3) salt, and silica (SiO2) filler to enhance ionic conductivity and potential window for electrochemical devices. Incorporating SiO2 into PVA-K2CO3 composites increased amorphous regions, enhancing ion conduction. The addition of 15 wt.% SiO2 resulted in the highest ionic conductivity at 3.25 x 10(-4) mScm(-1) and 7.86 x 10(-3) mScm(-1) at ambient temperature and 373.15 K, respectively, with a 3.35 V potential window.

POLYMERS (2021)

Add to Collection

Article Materials Science, Ceramics

Effect of doping CeO2 and Sc2O3 on structure, thermal properties and sintering resistance of YSZ

Xiaodong Wei et al.

Summary: This paper investigated the effects of CeO2 and Sc2O3 doping on YSZ, where CeO2 increased cell volume and tetragonal degree while Sc2O3 had the opposite effect. The results showed that co-doping with CeO2 and Sc2O3 improved thermal conductivity and provided stability against phase transformation, making CeScYSZ an ideal material for thermal protection at higher temperatures.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Polymer Science

Structural, thermal, and mechanical properties of gelatin-based films integrated with tara gum

Luca Nuvoli et al.

Summary: By mixing fish gelatin, Tara gum, and glycerol in different ratios and subjecting Tara gum to ball milling treatment, films with different morphologies can be obtained. The amount of glycerol and the type of Tara gum used strongly influence the morphology and density of the films, which in turn determine the thermal and mechanical behaviors. Improvements in thermal stability and mechanical properties can be achieved by using milled Tara gum or increasing glycerol content, up to 20 wt%. Exceeding this percentage of glycerol is detrimental to film quality and reduces thermal and mechanical performances.

POLYMER (2021)

Add to Collection

Article Chemistry, Physical

Non-Faradaic-based supercapacitor fabricated with fish skin gelatin biopolymer electrolyte

M. F. Z. Kadir

Summary: Fish gelatin-based polymer electrolytes doped with lithium perchlorate show improved ionic conductivity and electrochemical stability, with a high specific capacitance for potential use in electrical double-layer capacitors. The inclusion of LiClO4 enhances ion transport and forms interactions with the polymer, contributing to the amorphous electrolyte structure.

IONICS (2021)

Add to Collection

Article Polymer Science

Preparation and properties of a novel green solid polymer electrolyte for all-solid-state lithium battery

Zhen Ge et al.

Summary: The novel green solid polymer electrolyte IWPUS, prepared without the use of organic solvents, shows promising conductivity and has the potential to become an environmentally friendly candidate for all solid-state lithium ion batteries.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Energy & Fuels

Incorporation of organic additives with electron rich donors (N, O, S) in gelatin gel polymer electrolyte for dye sensitized solar cells

J. M. Abisharani et al.

Summary: A new sequence of GLN gel polymer electrolytes incorporated with KI/I2 redox pair and inexpensive organic additives were prepared. The assimilation of organic additives into the GLN gel polymer electrolytes is confirmed by various analyses, showing improved conductivity and reduced recombination process with the use of SAA organic additive. The EIS analysis provided insights into the charge transport mechanisms at the interface in DSSCs, revealing the importance of functional groups in the charge transfer process for enhanced PCE.

SOLAR ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Bio-Based Plasticized PVA Based Polymer Blend Electrolytes for Energy Storage EDLC Devices: Ion Transport Parameters and Electrochemical Properties

Shujahadeen B. Aziz et al.

Summary: The report presents a simple solution casting method for preparing plasticized polyvinyl alcohol (PVA)/methylcellulose (MC)-ammonium iodide (NH4I) electrolyte at room temperature, showing enhanced ion properties with increased glycerol content. The PVA: MC-NH4I proton conducting polymer electrolyte (PE) is deemed suitable for energy storage device (ESD) applications based on various electric and electrochemical properties. The addition of plasticizer improves charge carrier density in dielectric properties, resulting in improved energy and power density over multiple cycles.

MATERIALS (2021)

Add to Collection

Article Chemistry, Applied

A robust interface enabled by electrospun membrane with optimal resistance in lithium metal batteries

Chen Dong et al.

Summary: By spinning soft polymer associated with few MoO3 into fibers, a robust and stable interface was achieved, allowing for optimization of the mechanical performance of the interface by adjusting parameters.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Conductivity and dielectric properties of lithium-ion biopolymer blend electrolyte based film

Omed Gh. Abdullah et al.

Summary: The study investigates the effect of lithium salt contents on the ionic conduction of blend biopolymer electrolyte, showing that the maximum ionic conductivity is achieved at room temperature when incorporating 40 wt% of LiI. The Li-ion conduction mechanism is correlated barrier hopping (CBH) type, with the sample having the highest Li-ion conducting showing minimum activation energy.

RESULTS IN PHYSICS (2021)

Add to Collection

Article Chemistry, Physical

Development of biopolymer electrolyte membrane using Gellan gum biopolymer incorporated with NH4SCN for electro-chemical application

R. Meera Naachiyar et al.

Summary: A solid electrolyte was prepared using biopolymer Gellan gum and ammonium thiocyanate salt, showing high proton conductivity and glass transition temperature. Proton battery and fuel cell were fabricated using the highest ionic conducting biopolymer electrolyte, demonstrating promising performance.

IONICS (2021)

Add to Collection

Article Food Science & Technology

Fish oil-gelatin core-shell electrospun nanofibrous membranes as promising edible films for the encapsulation of hydrophobic and hydrophilic nutrients

Lijie Liu et al.

Summary: Fish oil-gelatin core-shell electrospun nanofibrous membranes were successfully fabricated for encapsulation of fish oil and VC. The addition of VC increased nanofiber fragility and may affect loading capacity. The ENMs disintegrated into particles in gastric and intestinal fluids, with fish oil release showing triphasic behaviors.

LWT-FOOD SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Cathode/gel polymer electrolyte integration design based on continuous composition and preparation technique for high performance lithium ion batteries

Feng Yu et al.

Summary: An integrated cathode/GPE based on continuous composition and preparation technique obtained through simple UV curing showed improved interfacial contact, facilitating fast ions transfer and leading to lower interfacial impedance, potential polarization, and more stable cycling property compared to cells with separated cathode and GPE. This study provided a low-cost natural material and a simple UV irradiation method to prepare integrated cathode and gel polymer electrolyte for solid-state lithium batteries, showing higher capacity retention after 200 cycles.

RSC ADVANCES (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Effect of Structural Features on Ionic Conductivity and Dielectric Response of PVA Proton Conductor-Based Solid Polymer Electrolytes

Maryam A. M. Saeed et al.

Summary: The study found that the appropriate salt ratio enhances the ionic conductivity of the solid polymer electrolyte, while higher salt concentrations lead to a reduction in conductivity.

JOURNAL OF ELECTRONIC MATERIALS (2021)

Add to Collection

Article Polymer Science

Ion transport in topological all-solid-state polymer electrolyte improved via graphene-oxide

Lei Zhang et al.

Summary: Designing and constructing novel topological polymer electrolyte matrices can enhance the ionic conducting ability of the prepared SPEs. In this study, a novel electrolyte matrix was successfully constructed using triphenylene as core and block poly(methyl methacrylate)-poly(poly[ethylene glycol] methyl ether methacrylate) as arm via sequential atom transfer radical polymerization. The optimal SPE obtained through solution casting showed higher ionic conductivity at ambient temperature.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Engineering, Manufacturing

Gelatin capsule residue-based films crosslinked with the natural agent genipin

Aline Oliveira e Silva Iahnke et al.

PACKAGING TECHNOLOGY AND SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Protonic EDLC cell based on chitosan (CS): methylcellulose (MC) solid polymer blend electrolytes

Shujahadeen B. Aziz et al.

IONICS (2020)

Add to Collection

Article Engineering, Chemical

Correlation between structural, ion transport and ionic conductivity of plasticized 2-hydroxyethyl cellulose based solid biopolymer electrolyte

M. N. Hafiza et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Solid-state double layer capacitors and protonic cell fabricated with dextran from Leuconostoc mesenteroides based green polymer electrolyte

M. H. Hamsan et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Review Chemistry, Physical

Bio-Based Polymer Electrolytes for Electrochemical Devices: Insight into the Ionic Conductivity Performance

Marwah Rayung et al.

MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Structural, impedance and electrochemical double-layer capacitor characteristics of improved number density of charge carrier electrolytes employing potato starch blend polymers

A. A. Azli et al.

IONICS (2020)

Add to Collection

Review Materials Science, Biomaterials

Marine collagen and its derivatives: Versatile and sustainable bio-resources for healthcare

Luca Salvatore et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

Add to Collection

Article Chemistry, Physical

Effect of ammonium thiocyanate on ionic conductivity and thermal properties of polyvinyl alcohol-methylcellulose-based polymer electrolytes

N. A. Shamsuri et al.

IONICS (2020)

Add to Collection

Review Chemistry, Physical

Gelatin-based solid electrolytes for chromogenic windows applications: a review

Mohammad Hossein Azarian et al.

IONICS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Metal framework as a novel approach for the fabrication of electric double layer capacitor device with high energy density using plasticized Poly(vinyl alcohol): Ammonium thiocyanate based polymer electrolyte

M. A. Brza et al.

ARABIAN JOURNAL OF CHEMISTRY (2020)

Add to Collection

Article Polymer Science

Compatible Solid Polymer Electrolyte Based on Methyl Cellulose for Energy Storage Application: Structural, Electrical, and Electrochemical Properties

Shujahadeen B. Aziz et al.

POLYMERS (2020)

Add to Collection

Article Polymer Science

The Study of Plasticized Amorphous Biopolymer Blend Electrolytes Based on Polyvinyl Alcohol (PVA): Chitosan with High Ion Conductivity for Energy Storage Electrical Double-Layer Capacitors (EDLC) Device Application

Shujahadeen B. Aziz et al.

POLYMERS (2020)

Add to Collection

Article Biochemistry & Molecular Biology

A Promising Polymer Blend Electrolytes Based on Chitosan: Methyl Cellulose for EDLC Application with High Specific Capacitance and Energy Density

Shujahadeen B. Aziz et al.

MOLECULES (2019)

Add to Collection

Article Polymer Science

Construction of Polymer Electrolyte Based on Soybean Protein Isolate and Hydroxyethyl Cellulose for a Flexible Solid-State Supercapacitor

Zhiyu Xun et al.

POLYMERS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of NH4Br as an ionic source on the structural/electrical properties of dextran-based biopolymer electrolytes and EDLC application

M. H. Hamsan et al.

BULLETIN OF MATERIALS SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Impact of lithium chlorate salts on structural and electrical properties of natural polymer electrolytes for all solid state lithium polymer batteries

P. Perumal et al.

VACUUM (2019)

Add to Collection

Article Chemistry, Physical

Insights into a layered hybrid solid electrolyte and its application in long lifespan high-voltage all-solid-state lithium batteries

Shicheng Yu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Incorporation of NH4NO3 into MC-PVA blend-based polymer to prepare proton-conducting polymer electrolyte films

Omed Gh. Abdullah et al.

IONICS (2018)

Add to Collection

Article Chemistry, Physical

Green electrolytes based on dextran-chitosan blend and the effect of NH4SCN as proton provider on the electrical response studies

M. F. Z. Kadir et al.

IONICS (2018)

Add to Collection

Article Chemistry, Physical

Study on the effect of PEG in ionic transport for CMC-NH4Br-based solid polymer electrolyte

N. K. Zainuddin et al.

IONICS (2018)

Add to Collection

Article Materials Science, Ceramics

Conductive bio-polymer electrolyte iota-carrageenan with ammonium nitrate for application in electrochemical devices

V. Moniha et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2018)

Add to Collection

Article Electrochemistry

Synthesis and characterization of bio-polymer electrolyte based on iota-carrageenan with ammonium thiocyanate and its applications

V. Moniha et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2018)

Add to Collection

Article Polymer Science

Preparation and Characterization of Styrene Bearing Diethanolamine Side Group, Styrene Copolymer Systems, and Their Metal Complexes

Aslisah Acikses et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2018)

Add to Collection

Article Polymer Science

Synergistic Effect of Halloysite Nanotubes and Glycerol on the Physical Properties of Fish Gelatin Films

Xiaohu Qiang et al.

POLYMERS (2018)

Add to Collection

Proceedings Paper Green & Sustainable Science & Technology

Characterization on Ionic Conductivity of Solid Bio-Polymer Electrolytes System Based Alginate Doped Ammonium Nitrate via Impedance Spectroscopy

N. M. J. Rasali et al.

GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS (2018)

Add to Collection

Review Nanoscience & Nanotechnology

A conceptual review on polymer electrolytes and ion transport models

Shujahadeen B. Aziz et al.

JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES (2018)

Add to Collection

Article Chemistry, Physical

The effect of NH4NO3 towards the conductivity enhancement and electrical behavior in methyl cellulose-starch blend based ionic conductors

M. H. Hamsan et al.

IONICS (2017)

Add to Collection

Article Chemistry, Physical

Development of proton conducting biopolymer membrane based on agar-agar for fuel cell

G. Boopathi et al.

IONICS (2017)

Add to Collection

Article Chemistry, Physical

NH4NO3 as charge carrier contributor in glycerolized potato starch-methyl cellulose blend-based polymer electrolyte and the application in electrochemical double-layer capacitor

M. H. Hamsan et al.

IONICS (2017)

Add to Collection

Article Chemistry, Physical

The order of addition of corn starch/lithium perchlorate/glycerol affects the optical, mechanical, and electrical properties of a solid polymer electrolyte

E. J. Vernon-Carter et al.

IONICS (2017)

Add to Collection

Article Polymer Science

Biopolymer agar-agar doped with NH4SCN as solid polymer electrolyte for electrochemical cell application

S. Selvalakshmi et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Fish gelatin nanofibers prevent drug crystallization and enable ultrafast delivery

Hyo Won Kwak et al.

RSC ADVANCES (2017)

Add to Collection

Article Electrochemistry

Quasi-Solid-State Polymer Electrolytes Based on a Polymeric Ionic Liquid with High Ionic Conductivity and Enhanced Stability

Nawon Jeon et al.

JOURNAL OF ELECTROCHEMICAL SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Preparation and characterization of biopolymer electrolyte based on cellulose acetate for potential applications in energy storage devices

S. Monisha et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2016)

Add to Collection

Review Materials Science, Ceramics

Investigations on proton conducting biopolymer membranes based on tamarind seed polysaccharide incorporated with ammonium thiocyanate

M. Premalatha et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2016)

Add to Collection

Article Chemistry, Physical

Influence of gamma irradiation on the electrical properties of LiClO4-gelatin solid polymer electrolytes: Modelling anomalous diffusion through generalized calculus

Tania Basu et al.

RADIATION PHYSICS AND CHEMISTRY (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Gelatin-Based Films and Coatings for Food Packaging Applications

Marina Ramos et al.

COATINGS (2016)

Add to Collection

Article Chemistry, Applied

Effects of salt and sugar addition on the physicochemical properties and nanostructure of fish gelatin

Li Cheng Sow et al.

FOOD HYDROCOLLOIDS (2015)

Add to Collection

Article Polymer Science

Characterization of proton conducting polymer blend electrolytes based on PVdF-PVA

M. Muthuvinayagam et al.

POLYMER (2015)

Add to Collection

Article Chemistry, Physical

Electrical and transport properties of NH4Br-doped cornstarch-based solid biopolymer electrolyte

M. F. Shukur et al.

IONICS (2015)

Add to Collection

Article Chemistry, Analytical

Ionic liquids for solid-state electrolytes and electrosynthesis

M. J. Neto et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2014)

Add to Collection

Article Energy & Fuels

Gelatin-based solid electrolyte releasing Li+ for smart window applications

R. Ramadan et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Novel polymer electrolytes based on gelatin and ionic liquids

Rita Leones et al.

OPTICAL MATERIALS (2012)

Add to Collection

Article Polymer Science

Electrical double-layer capacitors with plasticized polymer electrolyte based on methyl cellulose

N. E. A. Shuhaimi et al.

POLYMER BULLETIN (2012)

Add to Collection

Article Chemistry, Applied

Characteristics of gelatin from the skin of unicorn leatherjacket (Aluterus monoceros) as influenced by acid pretreatment and extraction time

Mehraj Ahmad et al.

FOOD HYDROCOLLOIDS (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Chitosan-PEO proton conducting polymer electrolyte membrane doped with NH4NO3

M. F. Z. Kadir et al.

MATERIALS RESEARCH INNOVATIONS (2011)

Add to Collection

Article Spectroscopy

FTIR studies of plasticized poly(vinyl alcohol)-chitosan blend doped with NH4NO3 polymer electrolyte membrane

M. F. Z. Kadir et al.

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2011)

Add to Collection

Review Chemistry, Applied

Fish gelatin: properties, challenges, and prospects as an alternative to mammalian gelatins

A. A. Karim et al.

FOOD HYDROCOLLOIDS (2009)

Add to Collection

Article Physics, Condensed Matter

Proton-conducting polymer electrolyte films based on chitosan acetate complexed with NH4NO3 salt

SR Majid et al.

PHYSICA B-CONDENSED MATTER (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.