☆ 4.7 Article

Optimal trajectory planning strategy for underactuated overhead crane with pendulum-sloshing dynamics and full-state constraints

NONLINEAR DYNAMICS (2022)

Related references

Note: Only part of the references are listed.

Article Acoustics

Robust multi-steps input command for liquid sloshing control

Abdullah Alshaya et al.

Summary: A robust input command based on multiple steps is proposed to eliminate residual vibrations in a multimode linear system, effectively suppressing sloshing oscillations in a water-filled container. The command duration can be adjusted to achieve a balance between reducing transient vibrations, enhancing command robustness, and increasing total maneuver time. The study investigates the command's performance in relation to system parameters and its robustness against uncertainties.

JOURNAL OF VIBRATION AND CONTROL (2022)

Add to Collection

Article Automation & Control Systems

Robust motion trajectory optimization of overhead cranes based on polynomial chaos expansion

Haijun Peng et al.

Summary: This paper presents a polynomial chaos-based framework for trajectory optimization of an overhead crane system under uncertainty. It constructs a deterministic trajectory optimization problem formulation for a two-dimensional overhead crane model, then proposes a robust trajectory optimization problem formulation to efficiently solve the uncertainty trajectory optimization problem. By using polynomial chaos expansion to quantify stochastic functions, an augmented deterministic trajectory optimization problem is obtained. This method is demonstrated to be feasible and effective through comparison with traditional sampling-based Monte Carlo simulations.

ISA TRANSACTIONS (2021)

Add to Collection

Article Engineering, Mechanical

Two-scale command shaping for arresting motion in nonlinear systems

Alexander Alyukov et al.

Summary: This paper introduces a feedforward technique based on two-scale command shaping for controlling motion in nonlinear systems, showing advantages in its nature and ease of implementation. By decomposing the control input into two scales, the method effectively controls system motion and eliminates the influence of nonlinear factors. Experimental results demonstrate close agreement with theoretical predictions in controlling a compound pendulum attached to a servomotor.

NONLINEAR DYNAMICS (2021)

Add to Collection

Article Engineering, Mechanical

An energy-time optimal autonomous motion control framework for overhead cranes in the presence of obstacles

Xinwei Wang et al.

Summary: This paper focuses on the autonomous motion control of 3-D underactuated overhead cranes in the presence of obstacles, and develops an offline motion planning+online trajectory tracking framework. The transfer mission is formulated as an energy-time hybrid optimal control problem to balance transfer time and energy consumption. A simple collision-avoidance condition is derived, and an iterative procedure based on the secant method determines optimal terminal time for fast and robust calculations. Finally, a model predictive controller with a piecewise weighted matrix is designed for high-precision trajectory tracking and fast residual sway suppression. The numerical simulation demonstrates the effectiveness of the discussed framework.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)

Add to Collection

Article Automation & Control Systems

A smooth polynomial shaped command for sloshing suppression of a suspended liquid container

Abdullah Alshaya et al.

Summary: The study proposes a smooth polynomial shaped command with adjustable command time length for eliminating residual vibrations in a multi-mode system. Numerical simulation tests show the effectiveness of the command in eliminating sloshing oscillations of a liquid-filled container in a rest-to-rest manoeuvre, demonstrating its ability to eliminate jerks and vibrational modes. The study also investigates the robustness of the command to system parameters and its capability to adjust command length.

TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL (2021)

Add to Collection

Article Automation & Control Systems

Neural Observer and Adaptive Fractional-Order Backstepping Fast-Terminal Sliding-Mode Control of RTG Cranes

Le Anh Tuan

Summary: This article presents a control system for rubber-tired gantry (RTG) cranes using three actuators to track three actuated outputs and stabilize two unactuated outputs. Advanced techniques such as fast-terminal sliding mode, fractional calculus, backstepping, and neural networks are incorporated to endow the control system with adaptive and robust features. Simulation and experimentation are conducted to evaluate the quality and effectiveness of the control system.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

Add to Collection

Article Automation & Control Systems

Nonlinear modeling and robust LMI fuzzy control of overhead crane systems

Charles Aguiar et al.

Summary: This study presents a novel approach using fuzzy models and controllers to address key dynamics issues in crane systems, ensuring system stability and performance through the construction of an LMI feasibility problem. The method proves to be more effective than optimal quadratic controllers and can smoothly and safely move cargo to the destination.

JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS (2021)

Add to Collection

Article Engineering, Mechanical

Robust observer-based anti-swing control of 2D-crane systems with load hoisting-lowering

Roger Miranda-Colorado

Summary: A new model-free robust control scheme is proposed for reducing the payload swing angle of two-dimensional crane systems with varying rope length. The controller includes a coupling function and disturbance observer to attenuate swing angle magnitude and minimize the effects of disturbances, allowing the system to track desired motion and hoist/load with minimal oscillations. Comparative numerical simulations show that the new controller outperforms existing control techniques in the presence of internal and external disturbances.

NONLINEAR DYNAMICS (2021)

Add to Collection

Article Automation & Control Systems

Passivity-based adaptive trajectory control of an underactuated 3-DOF overhead crane

Ping-Yen Shen et al.

Summary: This paper proposes a robust passivity-based adaptive control method for payload trajectory tracking of a three degree-of-freedom overhead crane. The closed loop system stability and error convergence are achieved with two candidate OSP feedback controllers.

CONTROL ENGINEERING PRACTICE (2021)

Add to Collection

Article Automation & Control Systems

An Adaptive Unscented Kalman Filter With Selective Scaling (AUKF-SS) for Overhead Cranes

Jaehoon Kim et al.

Summary: This article introduces an augmented adaptive unscented Kalman filter designed to estimate both the diagonal process noise covariance matrix and unknown inputs simultaneously. A selective scaling method is also introduced to improve the convergence property of the filter. The development of the novel KF is motivated by a specific estimation problem related to crane systems.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

Add to Collection

Article Automation & Control Systems

Control of Pendulum-Sloshing Dynamics in Suspended Liquid Containers

Baogang Xing et al.

Summary: This article presents a study on dynamic modeling and control methods for cable-suspended liquid containers, with experiments validating the effectiveness of the proposed approach.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

Add to Collection

Article Automation & Control Systems

Inverse dynamic control via simulation of feedback control by artificial neural networks for a crane system

Liz Rincon et al.

CONTROL ENGINEERING PRACTICE (2020)

Add to Collection

Article Automation & Control Systems

Command Shaping for Sloshing Suppression of a Suspended Liquid Container

Abdullah Alshaya et al.

JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME (2020)

Add to Collection

Article Automation & Control Systems

On the Stabilization of an Overhead Crane System With Dynamic and Delayed Boundary Conditions

Boumediene Chentouf et al.

IEEE TRANSACTIONS ON AUTOMATIC CONTROL (2020)

Add to Collection

Article Automation & Control Systems

Disturbance-Compensation-Based Continuous Sliding Mode Control for Overhead Cranes With Disturbances

Xianqing Wu et al.

IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Automation & Control Systems

Enhanced-coupling adaptive control for double-pendulum overhead cranes with payload hoisting and lowering

Biao Lu et al.

AUTOMATICA (2019)

Add to Collection

Article Automation & Control Systems

Damping Control of Sloshing in Liquid Container in Cart With Active Vibration Reducer: The Case of a Curved Path on a Horizontal Plane

Masafumi Hamaguchi

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2019)

Add to Collection

Article Engineering, Mechanical

Improved unity magnitude input shaping scheme for sway control of an underactuated 3D overhead crane with hoisting

M. J. Maghsoudi et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Acoustics

An experimental investigation on the dynamics of liquid sloshing in a rectangular tank and its interaction with an internal vertical pole

V. S. Sanapala et al.

JOURNAL OF SOUND AND VIBRATION (2019)

Add to Collection

Article Engineering, Mechanical

Distributed-mass payload dynamics and control of dual cranes undergoing planar motions

Xinsheng Zhao et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Automation & Control Systems

An Efficient Adaptive Hierarchical Sliding Mode Control Strategy Using Neural Networks for 3D Overhead Cranes

Viet-Anh Le et al.

INTERNATIONAL JOURNAL OF AUTOMATION AND COMPUTING (2019)

Add to Collection

Article Automation & Control Systems

Simulink® implementation and industrial test of Input Shaping techniques

Ramon Piedrafita et al.

CONTROL ENGINEERING PRACTICE (2018)

Add to Collection

Article Engineering, Mechanical

An energy-optimal solution for transportation control of cranes with double pendulum dynamics: Design and experiments

Ning Sun et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Add to Collection

Article Engineering, Mechanical

A neural network-based input shaping for swing suppression of an overhead crane under payload hoisting and mass variations

Liyana Ramli et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Add to Collection

Article Automation & Control Systems

Sliding-Mode-Control-Based Robust Finite-Time Antisway Tracking Control of 3-D Overhead Cranes

Dongkyoung Chwa

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2017)

Add to Collection

Article Automation & Control Systems

A New Nonlinear Control for Asymptotic Stabilization of a Class of Underactuated Systems: An Implementation to Slosh-Container Problem

Parth S. Thakar et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2017)

Add to Collection

Article Engineering, Mechanical

An improved input shaping design for an efficient sway control of a nonlinear 3D overhead crane with friction

Mohammad Javad Maghsoudi et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Add to Collection

Review Engineering, Mechanical

Control strategies for crane systems: A comprehensive review

Liyana Ramli et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Add to Collection

Article Engineering, Mechanical

Combined input shaping and feedback control for double-pendulum systems

Robert Mar et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Add to Collection

Article Engineering, Mechanical

A swing constrained time-optimal trajectory planning strategy for double pendulum crane systems

He Chen et al.

NONLINEAR DYNAMICS (2017)

Add to Collection

Article Engineering, Mechanical

A partially saturated adaptive learning controller for overhead cranes with payload hoisting/lowering and unknown parameters

Menghua Zhang et al.

NONLINEAR DYNAMICS (2017)

Add to Collection

Article Construction & Building Technology

Fuzzy-Logic-based control of payloads subjected to double-pendulum motion in overhead cranes

Dianwei Qian et al.

AUTOMATION IN CONSTRUCTION (2016)

Add to Collection

Article Engineering, Mechanical

Experiments on the synchronous sloshing in suspended containers described by shallow-water theory

Patrick Weidman et al.

JOURNAL OF FLUIDS AND STRUCTURES (2016)

Add to Collection

Article Engineering, Mechanical

A novel online motion planning method for double-pendulum overhead cranes

Menghua Zhang et al.

NONLINEAR DYNAMICS (2016)

Add to Collection

Article Physics, Fluids & Plasmas

Coupled sloshing in hyperbolic containers suspended as a bifilar pendulum

M. R. Turner et al.

PHYSICAL REVIEW FLUIDS (2016)

Add to Collection

Article Automation & Control Systems

Control of Bridge Cranes With Distributed-Mass Payload Dynamics

Jie Huang et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2015)

Add to Collection

Article Engineering, Mechanical

The pendulum-slosh problem: Simulation using a time-dependent conformal mapping

M. R. Turner et al.

JOURNAL OF FLUIDS AND STRUCTURES (2015)

Add to Collection

Article Engineering, Mechanical

Instability of sloshing motion in a vessel undergoing pivoted oscillations

M. R. Turner et al.

JOURNAL OF FLUIDS AND STRUCTURES (2015)

Add to Collection

Article Construction & Building Technology

Control of fast crane operation

Tai-Yen Thomas Kuo et al.

AUTOMATION IN CONSTRUCTION (2014)

Add to Collection

Article Automation & Control Systems

Minimum-Time Trajectory Planning for Underactuated Overhead Crane Systems With State and Control Constraints

Xuebo Zhang et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2014)

Add to Collection

Article Automation & Control Systems

Transportation task-oriented trajectory planning for underactuated overhead cranes using geometric analysis

N. Sun et al.

IET CONTROL THEORY AND APPLICATIONS (2012)

Add to Collection

Article Automation & Control Systems

Robustness analysis of input shaping commands for two-mode flexible systems

Y. -G. Sung et al.

IET CONTROL THEORY AND APPLICATIONS (2009)

Add to Collection

Article Automation & Control Systems

Energy-based nonlinear control of underactuated Euler-Lagrange systems subject to impacts

G. Hu et al.

IEEE TRANSACTIONS ON AUTOMATIC CONTROL (2007)

Add to Collection

Article Automation & Control Systems

Sloshing suppression control of liquid transfer systems considering a 3-D transfer path

K Yano et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.