☆ 4.8 Article

MoS2 wrapped MOF-derived N-doped carbon nanocomposite with wideband electromagnetic wave absorption

NANO RESEARCH (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

In-situ hydrothermal synthesis of NiCo alloy particles@hydrophilic carbon cloth to construct corncob-like heterostructure for high-performance electromagnetic wave absorbers

Zhihong Chen et al.

Summary: NiCo alloy particles@hydrophilic carbon cloth composites with a corncob-like network structure were successfully prepared using an in-situ hydrothermal method. The electromagnetic wave absorption performance of the composites could be controlled by adjusting the Ni/Co molar ratio. The composites showed excellent EMW absorption properties, with a minimum reflection loss of -41.80 dB and an effective absorption bandwidth of 5.8 GHz.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Janus (BNNS/ANF)-(AgNWs/ANF) thermal conductivity composite films with superior electromagnetic interference shielding and Joule heating performances

Yixin Han et al.

Summary: In this study, Janus (BNNS/ANF)-(AgNWs/ANF) composite films were successfully prepared, which exhibited one side insulating, one side conducting performance. The composite films showed high thermal conductivity, superior electromagnetic interference shielding effectiveness, good mechanical properties, stable temperature-voltage response characteristics, and reliable electrical stability.

NANO RESEARCH (2022)

Add to Collection

Article Nanoscience & Nanotechnology

High-Efficiency Electromagnetic Interference Shielding of rGO@FeNi/Epoxy Composites with Regular Honeycomb Structures

Ping Song et al.

Summary: With the rapid development of fifth-generation mobile communication technology and wearable electronic devices, the need for highly efficient EMI shielding materials has become crucial. In this study, a three-dimensional graphene oxide (GO) with regular honeycomb structure (GH) was constructed using sacrificial template and freeze-drying methods. Amino functionalized FeNi alloy particles (f-FeNi) were loaded onto the GH skeleton followed by in-situ reduction to prepare rGH@FeNi aerogel. The resulting rGH@FeNi/epoxy composites with a low rGH@FeNi mass fraction of 2.1 wt% exhibited a high EMI shielding effectiveness (EMI SE) of 46 dB, which is 5.8 times higher than that of rGO/FeNi/epoxy composites with the same mass fraction. The composites also displayed excellent thermal stability and mechanical properties.

NANO-MICRO LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Hollow MoC/NC sphere for electromagnetic wave attenuation: direct observation of interfacial polarization on nanoscale hetero-interfaces

Wenhuan Huang et al.

Summary: Researchers successfully synthesized MoC-incorporated N-doped carbon hollow sphere with nanoscale MoC/NC hetero-interfaces to evaluate its interfacial polarization in electromagnetic wave attenuation.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Chemistry, Physical

Construction of Co/C@MoS2 core-shell nanocubes with enhanced electromagnetic-wave absorption performance

Yizhe Wang et al.

Summary: This study successfully prepared core-shell-structured Co/C@MoS2 nanocubes, which demonstrated excellent electromagnetic wave absorption through optimized impedance matching and multiple loss mechanisms.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Chemistry, Physical

Construction of MOF-derived plum-like NiCo@C composite with enhanced multi-polarization for high-efficiency microwave absorption

Runrun Cheng et al.

Summary: The study successfully prepared plum-like NiCo@C composite with strong microwave absorption performance at 20wt% loading. The unique plum-like structure enriched the non-uniform interface, structural anisotropy facilitated electromagnetic wave dissipation, and magnetic coupling contributed to the coordination of electromagnetic characteristics.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Nanoscience & Nanotechnology

A Perspective for Developing Polymer-Based Electromagnetic Interference Shielding Composites

Yali Zhang et al.

Summary: The rapid development of aerospace weapons and equipment, wireless base stations, and 5G communication technologies has increased the demands for polymer-based electromagnetic interference (EMI) shielding composites. However, most of these composites fail to combine high performance and multi-functionality. In response, three possible directions for overcoming these limitations have been proposed, including the construction of efficient conductive networks and the optimization of multi-interfaces for lightweight and multifunction compatibility. This research aims to provide a theoretical basis and technical guidance for the preparation and development of polymer-based EMI shielding composites.

NANO-MICRO LETTERS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Ultrahigh Density of Atomic CoFe-Electron Synergy in Noncontinuous Carbon Matrix for Highly Efficient Magnetic Wave Adsorption

Wenhuan Huang et al.

Summary: In this study, a high-temperature explosion strategy was used to successfully assemble hierarchical porous carbon sponge with Co-Fe decoration. The as-constructed hybrid material exhibited superior electromagnetic wave absorption performance. Off-axis electron holography and X-ray absorption spectroscopy analysis revealed the presence of polarized nanodomain and the mutual interaction between metal clusters and carbon matrix responsible for the improved absorption.

NANO-MICRO LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Mechanically strong and folding-endurance Ti3C2Tx MXene/PBO nanofiber films for efficient electromagnetic interference shielding and thermal management

Lei Wang et al.

Summary: This study fabricated f-Ti3C2Tx/PNF films with excellent performance using the sol-gel-film conversion technique. The films exhibited outstanding electromagnetic shielding effectiveness, tensile strength, thermal conductivity, and electrical conductivity, as well as good thermal stability, flame retardancy, and structural stability.

CARBON ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Double ligand MOF-derived pomegranate-like Ni@C microspheres as high-performance microwave absorber

Qingwen Zeng et al.

Summary: The study focuses on regulating Ni-MOF-derived pomegranate-like Ni@C microspheres through a double organic ligand strategy and pyrolysis treatment, resulting in controlled morphology and crystallization. The pomegranate-like Ni@C microspheres possess abundant interfaces, a unique conductive network, and a magnetic dielectric synergy system, exhibiting excellent microwave absorption performance.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Polymer Science

Novel Ti3C2Tx MXene/epoxy intumescent fire-retardant coatings for ancient wooden architectures

Shan Huang et al.

Summary: In this study, Ti3C2Tx was used as a synergistic agent to prepare Ti3C2Tx/epoxy intumescent fire-retardant coating (TEIFC), enhancing the fire-retardant performance, hardness, and thermal stability of the coating. This work provides a novel strategy for the design and preparation of intumescent fire-retardant coating using MXene, expanding its industrial applications in fire prevention of ancient buildings.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Hollow Engineering to Co@N-Doped Carbon Nanocages via Synergistic Protecting-Etching Strategy for Ultrahigh Microwave Absorption

Panbo Liu et al.

Summary: A controlled synergistic protecting-etching strategy was proposed to construct hollow Co@N-doped carbon nanocages with uniform heterojunctions, addressing the shortcomings of using sacrificing templates or corrosive agents and exhibiting superior microwave absorption performance. The strategy not only provides inspiration for creating hollow void inside other MOFs crystals, but also broadens the candidates for lightweight and high-efficient microwave absorbers.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Facile synthesis of nickel/carbon nanotubes hybrid derived from metal organic framework as a lightweight, strong and efficient microwave absorber

Yun Qiu et al.

Summary: Transition metal carbon composites derived from metal organic frameworks (MOFs) have attracted attention in microwave absorption field. The study successfully fabricated nickel MOF at room temperature with water as solvent, and prepared nickel/carbon nanotubes composite via in-situ pyrolysis, showing excellent microwave absorption properties. The doping state of nitrogen greatly affects the performance of the composites.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

3D Ultralight Hollow NiCo Compound@MXene Composites for Tunable and High-Efficient Microwave Absorption

Hui-Ya Wang et al.

Summary: The 3D hollow hierarchical architectures designed to inhibit stack of MXene flakes have shown promising potential for lightweight, high-efficient microwave absorbers with tunable absorption properties. This study demonstrates a simple strategy for constructing MXene-based composites to achieve high-performance microwave absorption materials.

NANO-MICRO LETTERS (2021)

Add to Collection

Article Engineering, Environmental

Wire-in-tube ZnO@carbon by molecular layer deposition: Accurately tunable electromagnetic parameters and remarkable microwave absorption

Lili Yan et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

One-step synthesis of MoS2 nanoparticles with different morphologies for electromagnetic wave absorption

Zhou Feng et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

MOFs-derived multi-chamber carbon microspheres with enhanced microwave absorption

Dawei Liu et al.

CARBON (2020)

Add to Collection

Article Engineering, Environmental

CoNi nanoparticles encapsulated by nitrogen-doped carbon nanotube arrays on reduced graphene oxide sheets for electromagnetic wave absorption

Xinci Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Environmental

3D hierarchical local heterojunction of MoS2/FeS2 for enhanced microwave absorption

Linshen Xing et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Direct one-step synthesis of CoFex@Co@C hybrids derived from a metal organic framework for a lightweight and high-performance microwave absorber

Bochong Wang et al.

NANOTECHNOLOGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Hydrophobic MOFs@Metal Nanoparticles@COFs for Interfacially Confined Photocatalysis with High Efficiency

Dengrong Sun et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Highly efficient and stable Si photocathode with hierarchical MoS2/Ni3S2 catalyst for solar hydrogen production in alkaline media

Ronglei Fan et al.

NANO ENERGY (2020)

Add to Collection

Article Engineering, Manufacturing

Hierarchical nest-like structure of Co/Fe MOF derived CoFe@C composite as wide-bandwidth microwave absorber

Lei Wang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Chemistry, Physical

Hollow porous CoNi/C composite nanomaterials derived from MOFs for efficient and lightweight electromagnetic wave absorber

Yan-Li Wang et al.

CARBON (2020)

Add to Collection

Article Engineering, Manufacturing

Construction of core-shell PPy@MoS2 with nanotube-like heterostructures for electromagnetic wave absorption: Assembly and enhanced mechanism

Lixue Gai et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Engineering, Multidisciplinary

Exceptionally porous three-dimensional architectural nanostructure derived from CNTs/graphene aerogel towards the ultra-wideband EM absorption

Hualiang Lv et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Facile synthesis of hierarchically porous rGO/MnZn ferrite composites for enhanced microwave absorption performance

Tao Ma et al.

SYNTHETIC METALS (2020)

Add to Collection

Article Chemistry, Physical

Core-shell Ni@C encapsulated by N-doped carbon derived from nickel-organic polymer coordination composites with enhanced microwave absorption

Panbo Liu et al.

CARBON (2020)

Add to Collection

Article Engineering, Manufacturing

In situ anchoring carbon nanotubes on the Ni/C nanosheets with controllable thickness for boosting the electromagnetic waves absorption

Bo Wen et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Engineering, Multidisciplinary

Biopolymer nanofiber/reduced graphene oxide aerogels for tunable and broadband high-performance microwave absorption

Boya Kuang et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Defect Engineering in Two Common Types of Dielectric Materials for Electromagnetic Absorption Applications

Bin Quan et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Engineering, Multidisciplinary

Metal organic framework (ZIF-67)-derived hollow CoS2/N-doped carbon nanotube composites for extraordinary electromagnetic wave absorption

Jing Yan et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

Hollow Co-Co3O4@CNTs derived from ZIF-67 for lithium ion batteries

Yanfei Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Highly effective shielding of electromagnetic waves in MoS2 nanosheets synthesized by a hydrothermal method

Deqing Zhang et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

MOF-derived graphitized porous carbon/Fe-Fe3C nanocomposites with broadband and enhanced microwave absorption performance

Tingyu Yan et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

Add to Collection

Article Chemistry, Physical

Achieving MOF-derived one-dimensional porous ZnO/C nanofiber with lightweight and enhanced microwave response by an electrospinning method

Weihua Gu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Cobalt, Nitrogen-Doped Porous Carbon Nanosheet-Assembled Flowers from Metal-Coordinated Covalent Organic Polymers for Efficient Oxygen Reduction

Shan Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Physical

Core-shell nanostructured CS/MoS2: A promising material for microwave absorption

Fan Zhang et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Engineering, Environmental

Paramagnetic CoS2@MoS2 core-shell composites coated by reduced graphene oxide as broadband and tunable high-performance microwave absorbers

Tao Zhu et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Nanoscience & Nanotechnology

A Versatile Route toward the Electromagnetic Functionalization of Metal-Organic Framework-Derived Three-Dimensional Nanoporous Carbon Composites

Wei Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Physical

Impact of morphology and dielectric property on the microwave absorbing performance of MoS2-based materials

Weidong Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

MOFs-Derived Hollow Co/C Microspheres with Enhanced Microwave Absorption Performance

Zhennan Li et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Enhanced Low-Frequency Electromagnetic Properties of MOF-Derived Cobalt through Interface Design

Wei Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

© Peeref 2019-2024. All rights reserved.