4.6 Article

High-entropy ceramics: Propelling applications through disorder

Related references

Note: Only part of the references are listed.
Article Materials Science, Ceramics

Strength of single-phase high-entropy carbide ceramics up to 2300°C

Lun Feng et al.

Summary: The mechanical properties of (Hf,Zr,Ti,Ta,Nb)C high-entropy carbide (HEC) ceramics were investigated, showing high hardness and strength. The flexural strength of the ceramics decreased above 1800 degrees Celsius as temperature increased.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)

Article Chemistry, Physical

Cation-disordered rocksalt-type high-entropy cathodes for Li-ion batteries

Zhengyan Lun et al.

Summary: High-entropy ceramics are solid solutions with compositional flexibility and wide applicability, showing substantial performance improvement in lithium-ion battery cathodes. The high-entropy concept leads to enhancements in energy density and rate capability, especially in cation-disordered rocksalt-type cathodes. High-entropy materials have the potential for various applications and the design of high-entropy solid solutions in the DRX space can further enhance performance in battery electrodes.

NATURE MATERIALS (2021)

Article Materials Science, Multidisciplinary

Oxidation behaviors of (Hf0.25Zr0.25Ta0.25Nb0.25)C and (Hf0.25Zr0.25Ta0.25Nb0.25)C-SiC at 1300-1500 °C

Haoxuan Wang et al.

Summary: In this study, high-entropy ceramics and high-entropy ceramics doped with SiC were fabricated and their oxidation behavior was investigated. The results showed that the addition of SiC improved the oxidation resistance of the ceramics and suppressed the microcracks that appeared during the oxidation process.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Materials Science, Ceramics

One-step synthesis of single-phase (Co, Mg, Ni, Cu, Zn) O High entropy oxide nanoparticles through SCS procedure: Thermodynamics and experimental evaluation

A. Vojdani Saghir et al.

Summary: Thermodynamic calculations were used to determine the conditions for single-phase (Co, Mg, Ni, Cu, Zn) O particle synthesis, while the impact of activities coefficients alteration on the formation of these particles was also evaluated. Experimental results showed that glycine synthesis under fuel-lean conditions produced promising (Co, Mg, Ni, Cu, Zn) O powders with specific physicochemical properties.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Materials Science, Ceramics

Ultra-low thermal conductivity and enhanced mechanical properties of high-entropy rare earth niobates (RE3NbO7, RE = Dy, Y, Ho, Er, Yb)

Jiatong Zhu et al.

Summary: A novel high-entropy rare earth niobates material has been prepared, showing superior mechanical properties, high thermal expansion coefficient, and ultra-low thermal conductivity, making it a potential alternative for traditional yttria-stabilized zirconia as a new type of thermal barrier coating.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Chemistry, Multidisciplinary

A New High Entropy Glycerate for High Performance Oxygen Evolution Reaction

Thi Xuyen Nguyen et al.

Summary: A new high entropy material, HEG, synthesized via a simple solvothermal process, shows excellent oxygen evolution reaction (OER) activity and outperforms binary-, ternary-, and quaternary-metal glycerates. The significance of synergistic effect is demonstrated in modifying electronic structure and coordination environment. Moreover, HEG exhibits outstanding stability and durability in alkaline electrolyte and shows good overall water splitting performance in HEG@HEG electrolyzer.

ADVANCED SCIENCE (2021)

Article Chemistry, Physical

Denary oxide nanoparticles as highly stable catalysts for methane combustion

Tangyuan Li et al.

Summary: This study reports a method for synthesizing single-phase denary nanoparticles as stable and efficient catalysts for the combustion of methane. By using temperature-, oxidation-, and entropy-driven synthesis strategies, a wide range of elements with largely dissimilar oxidation potentials can be mixed, leading to high performance and superior stability in multi-element oxide catalysts.

NATURE CATALYSIS (2021)

Article Physics, Applied

Achieved limit thermal conductivity and enhancements of mechanical properties in fluorite RE3NbO7 via entropy engineering

Lin Chen et al.

Summary: The study demonstrates that entropy engineering can significantly impact the properties of fluorite RE3NbO7, achieving limited thermal conductivity and enhanced mechanical properties. The thermal conductivity is reduced to as low as 1.03-1.17 Wm(-1)K(-1), while the mechanical properties are notably improved.

APPLIED PHYSICS LETTERS (2021)

Article Engineering, Environmental

High-entropy A2B2O7-type oxide ceramics: A potential immobilising matrix for high-level radioactive waste

Lin Zhou et al.

Summary: High-entropy ceramics have been demonstrated as a potential candidate for immobilizing high-level radioactive waste due to their low normalized leaching rates and excellent chemical durability. The synergistic effects of compositional complexity and severe lattice distortion contribute to their outstanding chemical durability, providing a strategy for developing and applying high-entropy ceramics as wasteforms.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Multidisciplinary Sciences

High-entropy-stabilized chalcogenides with high thermoelectric performance

Binbin Jiang et al.

Summary: By utilizing entropy-driven structural stabilization, we increased the figure of merit (zT) value to 1.8 in an n-type PbSe-based high-entropy material at 900 kelvin, showcasing a promising method to enhance the performance of thermoelectric materials.

SCIENCE (2021)

Article Materials Science, Ceramics

Electrical and thermal transport behaviours of high-entropy perovskite thermoelectric oxides

Yunpeng Zheng et al.

Summary: High-entropy strategy and defect engineering were used to significantly suppress thermal conductivity and optimize electrical conductivity in SrTiO3-based thermoelectric ceramics. The minimum thermal conductivity in high-entropy TiO3 bulks can be reduced to 1.17 W/(m • K), with a power factor of 295μW/(m • K-2), and a ZT value of 0.2 at 873K.

JOURNAL OF ADVANCED CERAMICS (2021)

Article Materials Science, Multidisciplinary

Multi elements substituted Aurivillius phase relaxor ferroelectrics using high entropy design concept

Man Zhang et al.

Summary: The study presents the preparation of two new multi-element substituted Aurivillius phase ceramics, showing excellent properties and relaxor behavior. The improved piezoelectric constant is attributed to low coercive fields related to multi-domain configurations in the ceramics.

MATERIALS & DESIGN (2021)

Article Materials Science, Multidisciplinary

Temperature-dependent elastic properties of binary and multicomponent high-entropy refractory carbides

D. G. Sangiovanni et al.

Summary: The study investigates the elastic moduli properties of refractory carbides at different temperatures through AIMD simulations. The results show that TaC exhibits the highest elastic resistance at high temperatures, while the (V, Nb, Ta, Mo, W) C system is suitable for applications requiring superior toughness at both room and elevated temperatures.

MATERIALS & DESIGN (2021)

Article Nanoscience & Nanotechnology

Magnetic Texture in Insulating Single Crystal High Entropy Oxide Spinel Films

Yogesh Sharma et al.

Summary: This study investigates the synthesis and properties of magnetic insulators, revealing how configurational complexity can be utilized to achieve smooth interfaces and precise tuning of interfacial magnetic exchange coupling. Single-crystal films with high resistivity and strong magnetic response were successfully prepared using entropy-assisted synthesis.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Materials Science, Multidisciplinary

Temperature Dependent Thermal and Elastic Properties of High Entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)B2: Molecular Dynamics Simulation by Deep Learning Potential

Fu-Zhi Dai et al.

Summary: The study predicted the thermal and elastic properties of high entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)B-2 at different temperatures, and found that the predicted values agree well with experimental measurements. The use of machine learning potential opens up new possibilities for gaining insights into high entropy materials.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

Densification, microstructure and mechanical properties of multicomponent (TiZrHfNbTaMo)C ceramic prepared by pressureless sintering

Wen Zhang et al.

Summary: A multicomponent (TiZrHfNbTaMo)C ceramic was fabricated by pressureless sintering at temperatures ranging from 2100°C to 2500°C. The influence of sintering temperature on densification, microstructure, and mechanical properties was investigated. It was found that the relative density increases and the average grain size grows with higher sintering temperatures.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Materials Science, Ceramics

Thin film growth effects on electrical conductivity in entropy stabilized oxides

V Jacobson et al.

Summary: Entropy stabilization is a new approach to designing novel materials. Research has shown that substrate temperature and deposition pressure have strong effects on the properties of thin films. Films deposited at lower temperatures and pressures have lower electrical resistivity and can be altered through annealing in an oxygen-rich environment.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Materials Science, Ceramics

Dual-phase rare-earth-zirconate high-entropy ceramics with glass-like thermal conductivity

Jiatong Zhu et al.

Summary: A series of rare-earth-zirconate high-entropy ceramics with single and dual-phase structures were prepared, showing lower thermal conductivity and enhanced hardness and thermal expansion coefficients. These dual-phase ceramics may be promising for thermal barrier coatings.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Materials Science, Multidisciplinary

Carbon stoichiometry and mechanical properties of high entropy carbides

M. D. Hossain et al.

Summary: High entropy ceramics discovered through compositional exploration exhibit enhanced properties and diverse applications. This study investigates the synthesis and mechanical properties of high entropy (HfNbTaTiZr)C-x thin films as a function of carbon content, revealing the evolution of bonding and microstructure with variations in carbon, leading to significant changes in film hardness. Through characterization techniques and first principles investigations, the roles of microstructure and bonding characteristics in mechanical property development of (HfNbTaTiZr)C-x thin films are elucidated.

ACTA MATERIALIA (2021)

Article Multidisciplinary Sciences

Entropy engineering promotes thermoelectric performance in p-type chalcogenides

Binbin Jiang et al.

Summary: The thermoelectric properties of p-type chalcogenides were effectively improved by band convergence and hierarchical structure based on a high-entropy-stabilized matrix, resulting in enhanced Seebeck coefficient, electric transport property, and low lattice thermal conductivity. The study achieved a peak zT of 2.0 at 900K and a high experimental conversion efficiency of 12% at Delta T=506K for the fabricated segmented modules, showing promising applications for low-cost thermoelectric materials.

NATURE COMMUNICATIONS (2021)

Article Materials Science, Multidisciplinary

Opportunities for High-Entropy Materials in Rechargeable Batteries

Yuwei Chen et al.

Summary: High entropy materials, with complex stoichiometry and attractive synergy effects, have attracted significant interest as promising candidates for energy storage devices. The entropy-stabilized rock-salt-type Co0.2Cu0.2Mg0.2Ni0.2Zn0.2O stands out for its multiple functions and is highlighted in this survey. Suggestions are given on the future role of high entropy materials in next-generation batteries.

ACS MATERIALS LETTERS (2021)

Article Materials Science, Ceramics

High-temperature oxidation behavior of (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramics in air

Beilin Ye et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Article Materials Science, Ceramics

Oxidation behavior of (Hf0.2Ta0.2Zr0.2Ti0.2Nb0.2)C-xSiC ceramics at high temperature

Haoxuan Wang et al.

CERAMICS INTERNATIONAL (2020)

Article Chemistry, Physical

Oxidation behaviours of high-entropy transition metal carbides in 1200 °C water vapor

Yongqiang Tan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Materials Science, Ceramics

Improved creep resistance of high entropy transition metal carbides

Xuxu Han et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Review Nanoscience & Nanotechnology

High-entropy ceramics

Corey Oses et al.

NATURE REVIEWS MATERIALS (2020)

Article Nanoscience & Nanotechnology

Electrochemical Performance of (MgCoNiZn)1-xLixO High-Entropy Oxides in Lithium-Ion Batteries

Ersu Lokcu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Materials Science, Ceramics

The effect of submicron grain size on thermal stability and mechanical properties of high-entropy carbide ceramics

Fei Wang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Article Materials Science, Ceramics

Dual-phase high-entropy ultra-high temperature ceramics

Mingde Qin et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Article Materials Science, Ceramics

Small scale fracture and strength of high-entropy carbide grains during microcantilever bending experiments

Tamas Csanadi et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Article Materials Science, Ceramics

Mechanical properties of hot-pressed high-entropy diboride-based ceramics

Ji-Xuan Liu et al.

JOURNAL OF ADVANCED CERAMICS (2020)

Article Materials Science, Multidisciplinary

Irradiation damage in (Zr0.25Ta0.25Nb0.25Ti0.25)C high-entropy carbide ceramics

Fei Wang et al.

ACTA MATERIALIA (2020)

Article Materials Science, Multidisciplinary

Part I: Theoretical predictions of preferential oxidation in refractory high entropy materials

Lavina Backman et al.

ACTA MATERIALIA (2020)

Article Materials Science, Multidisciplinary

Electron and phonon thermal conductivity in high entropy carbides with variable carbon content

Christina M. Rost et al.

ACTA MATERIALIA (2020)

Article Materials Science, Ceramics

Thermophysical and mechanical properties of novel high-entropy metal nitride-carbides

Tongqi Wen et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Article Materials Science, Ceramics

Phase evolution and properties of (VNbTaMoW)C high entropy carbide prepared by reaction synthesis

Diqiang Liu et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Article Multidisciplinary Sciences

Entropy-stabilized single-atom Pd catalysts via high-entropy fluorite oxide supports

Haidi Xu et al.

NATURE COMMUNICATIONS (2020)

Article Materials Science, Multidisciplinary

Property and cation valence engineering in entropy-stabilized oxide thin films

George N. Kotsonis et al.

PHYSICAL REVIEW MATERIALS (2020)

Article Multidisciplinary Sciences

Bulk high-entropy nitrides and carbonitrides

Olivia F. Dippo et al.

SCIENTIFIC REPORTS (2020)

Article Multidisciplinary Sciences

Extremely hard and tough high entropy nitride ceramics

Dmitry Moskovskikh et al.

SCIENTIFIC REPORTS (2020)

Article Materials Science, Ceramics

High-temperature toughening in ternary medium-entropy (Ta1/3Ti1/3Zr1/3)C carbide consolidated using spark-plasma sintering

D. Demirskyi et al.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2020)

Article Nanoscience & Nanotechnology

Lithiation Mechanism in High-Entropy Oxides as Anode Materials for Li-Ion Batteries: An Operando XAS Study

P. Ghigna et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Materials Science, Multidisciplinary

The role of multi-elements and interlayer on the oxidation behaviour of (Hf-Ta-Zr-Nb)C high entropy ceramics

Yichen Wang et al.

CORROSION SCIENCE (2020)

Article Multidisciplinary Sciences

Lithium containing layered high entropy oxide structures

Junbo Wang et al.

SCIENTIFIC REPORTS (2020)

Article Multidisciplinary Sciences

Enhanced Hardness in High-Entropy Carbides through Atomic Randomness

Yichen Wang et al.

ADVANCED THEORY AND SIMULATIONS (2020)

Article Chemistry, Physical

A high entropy oxide (Mg0.2Co0.2Ni0.2Cu0.2Zn0.2O) with superior lithium storage performance

Nan Qiu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Materials Science, Multidisciplinary

Oxidation behavior of (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramics at 1073-1473 K in air

Beilin Ye et al.

CORROSION SCIENCE (2019)

Article Materials Science, Ceramics

Low-temperature sintering of single-phase, high-entropy carbide ceramics

Lun Feng et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Article Chemistry, Physical

Unavoidable disorder and entropy in multi-component systems

Cormac Toher et al.

NPJ COMPUTATIONAL MATERIALS (2019)

Article Materials Science, Multidisciplinary

High porosity and low thermal conductivity high entropy (Zr0.2Hf0.2Ti0.2Nb0.2Ta0.2)C

Heng Chen et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Article Materials Science, Multidisciplinary

Magnetic frustration control through tunable stereochemically driven disorder in entropy-stabilized oxides

Peter B. Meisenheimer et al.

PHYSICAL REVIEW MATERIALS (2019)

Article Materials Science, Ceramics

First-principles study, fabrication, and characterization of (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramic

Beilin Ye et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Article Materials Science, Multidisciplinary

Phase stability and mechanical properties of novel high entropy transition metal carbides

Tyler J. Harrington et al.

ACTA MATERIALIA (2019)

Article Chemistry, Physical

A high-entropy silicide: (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Si2

Joshua Gild et al.

JOURNAL OF MATERIOMICS (2019)

Article Chemistry, Multidisciplinary

The use of poly-cation oxides to lower the temperature of two-step thermochemical water splitting

Shang Zhai et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Materials Science, Ceramics

(Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramics with low thermal conductivity

Xueliang Yan et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2018)

Article Materials Science, Multidisciplinary

Evidence for Jahn-Teller compression in the (Mg, Co, Ni, Cu, Zn)O entropy-stabilized oxide: A DFT study

Zs. Rak et al.

MATERIALS LETTERS (2018)

Article Nanoscience & Nanotechnology

High-entropy ceramic thin films; A case study on transition metal diborides

P. H. Mayrhofer et al.

SCRIPTA MATERIALIA (2018)

Article Multidisciplinary Sciences

High entropy oxides for reversible energy storage

Abhishek Sarkar et al.

NATURE COMMUNICATIONS (2018)

Article Chemistry, Multidisciplinary

Charge-Induced Disorder Controls the Thermal Conductivity of Entropy-Stabilized Oxides

Jeffrey L. Braun et al.

ADVANCED MATERIALS (2018)

Article Multidisciplinary Sciences

High-entropy high-hardness metal carbides discovered by entropy descriptors

Pranab Sarker et al.

NATURE COMMUNICATIONS (2018)

Article Materials Science, Multidisciplinary

Production and mechanical properties of high-entropic carbide based on the TiZrHfVNbTa multicomponent alloy

V. F. Gorban' et al.

JOURNAL OF SUPERHARD MATERIALS (2017)

Article Materials Science, Ceramics

Local structure of the MgxNixCoxCuxZnxO(x=0.2) entropy-stabilized oxide: An EXAFS study

Christina M. Rost et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

Article Chemistry, Physical

Modeling Off-Stoichiometry Materials with a High-Throughput Ab-Initio Approach

Kesong Yang et al.

CHEMISTRY OF MATERIALS (2016)

Article Chemistry, Physical

Room temperature lithium superionic conductivity in high entropy oxides

D. Berardan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Multidisciplinary Sciences

Entropy-stabilized oxides

Christina M. Rost et al.

NATURE COMMUNICATIONS (2015)

Article Engineering, Biomedical

Characterization of multi-principal-element (TiZrNbHfTa)N and (TiZrNbHfTa)C coatings for biomedical applications

V. Braic et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2012)

Article Chemistry, Physical

Effects of substrate temperature on the structure and mechanical properties of (TiVCrZrHf)N coatings

Shih-Chang Liang et al.

APPLIED SURFACE SCIENCE (2011)

Article Nanoscience & Nanotechnology

Inhibition of grain coarsening up to 1000 degrees C in (AlCrNbSiTiV)N superhard coatings

Ping-Kang Huang et al.

SCRIPTA MATERIALIA (2010)

Article Materials Science, Coatings & Films

Preparation and characterization of AlCrTaTiZr multi-element nitride coatings

Chia-Han Lai et al.

SURFACE & COATINGS TECHNOLOGY (2006)

Article Materials Science, Coatings & Films

Nanostructured nitride films of multi-element high-entropy alloys by reactive DC sputtering

TK Chen et al.

SURFACE & COATINGS TECHNOLOGY (2005)

Article Materials Science, Coatings & Films

Nanostructured nitride films of multi-element high-entropy alloys by reactive DC sputtering

TK Chen et al.

SURFACE & COATINGS TECHNOLOGY (2004)