Related references
Note: Only part of the references are listed.Corrosion resistance and biocompatibility of calcium-containing coatings developed in near-neutral solutions containing phytic acid and phosphoric acid on AZ31B alloy
Xiaoting Shi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Multi-barrel electrodes containing an internal micro-reference for the improved visualization of galvanic corrosion processes in magnesium-based materials using potentiometric scanning electrochemical microscopy
Daniel Filotas et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Double Barrel Microelectrode Assembly to Prevent Electrical Field Effects in Potentiometric SECM Imaging of Galvanic Corrosion Processes
D. Filotas et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
On the Application of the Scanning Vibrating Electrode Technique (SVET) to Corrosion Research
A. C. Bastos et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
The Application of Scanning Electrochemical Microscopy to Corrosion Research
Nicholas A. Payne et al.
CORROSION (2017)
Improved potentiometric SECM imaging of galvanic corrosion reactions
D. Filotas et al.
CORROSION SCIENCE (2017)
The effect of electric field on potentiometric Scanning Electrochemical Microscopic imaging
Andras Kiss et al.
ELECTROCHEMISTRY COMMUNICATIONS (2017)
Novel dual microelectrode probe for the simultaneous visualization of local Zn2+ and pH distributions in galvanic corrosion processes
D. Filotas et al.
CORROSION SCIENCE (2017)
Combined amperometric/potentiometric probes for improved chemical imaging of corroding surfaces using Scanning Electrochemical Microscopy
D. Filotas et al.
ELECTROCHIMICA ACTA (2016)
Possibilities and Limitations of Scanning Electrochemical Microscopy of Mg and Mg Alloys
S. Thomas et al.
CORROSION (2015)
SECM imaging of the cut edge corrosion of galvanized steel as a function of pH
A. G. Marques et al.
ELECTROCHIMICA ACTA (2015)
Possibilities and Limitations of Scanning Electrochemical Microscopy of Mg and Mg Alloys
S. Thomas et al.
CORROSION (2015)
Scanning electrochemical microscopy studies for the characterization of localized corrosion reactions at cut edges of coil-coated steel
B. M. Fernandez-Perez et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2014)
In Situ Scanning Electrochemical Microscopy (SECM) Detection of Metal Dissolution during Zinc Corrosion by Means of Mercury Sphere-Cap Microelectrode Tips
Ricardo M. Souto et al.
CHEMISTRY-A EUROPEAN JOURNAL (2012)
Corrosion of Zinc as a Function of pH
S. Thomas et al.
CORROSION (2012)
Cut-edge corrosion study on painted aluminum rich metallic coated steel by scanning vibrating electrode and micro-potentiometric techniques
A. Alvarez-Pampliega et al.
ELECTROCHIMICA ACTA (2012)
Scanning electrochemical microscopy for the investigation of corrosion processes: Measurement of Zn2+ spatial distribution with ion selective microelectrodes
Javier Izquierdo et al.
ELECTROCHIMICA ACTA (2012)
DEVELOPMENT OF SOLID CONTACT MICROPIPETTE Zn-ION SELECTIVE ELECTRODE FOR CORROSION STUDIES
Agnes Varga et al.
ANALYTICAL LETTERS (2011)
Modeling bimetallic corrosion under thin electrolyte films
F. Thebault et al.
CORROSION SCIENCE (2011)
Quasi-simultaneous measurements of ionic currents by vibrating probe and pH distribution by ion-selective microelectrode
S. V. Lamaka et al.
ELECTROCHEMISTRY COMMUNICATIONS (2011)
SECM study of defect repair in self-healing polymer coatings on metals
Y. Gonzalez-Garcia et al.
ELECTROCHEMISTRY COMMUNICATIONS (2011)
Local electrochemical impedance spectroscopy: A review and some recent developments
Vicky MeiWen Huang et al.
ELECTROCHIMICA ACTA (2011)
Spatially resolved measurement of electrochemical activity and pH distributions in corrosion processes by scanning electrochemical microscopy using antimony microelectrode tips
Javier Izquierdo et al.
ELECTROCHIMICA ACTA (2011)
Electrochemistry and surface analysis of the effect of benzotriazole on the cut edge corrosion of galvanized steel
Juliana V. Custodio et al.
ELECTROCHIMICA ACTA (2010)
Studying phosphate corrosion inhibition at the cut edge of coil coated galvanized steel using the SVET and EIS
A. M. Simoes et al.
PROGRESS IN ORGANIC COATINGS (2010)
SECM Imaging of Interfacial Processes in Defective Organic Coatings Applied on Metallic Substrates Using Oxygen as Redox Mediator
Ricardo M. Souto et al.
ELECTROANALYSIS (2009)
Corrosion inhibition at galvanized steel cut edges by phosphate pigments
A. M. Simoes et al.
ELECTROCHIMICA ACTA (2009)
Application of scanning electrochemical microscope in the study of corrosion of metals
Lin Niu et al.
JOURNAL OF MATERIALS SCIENCE (2009)
The effect of magnesium additions on the microstructure and cut edge corrosion resistance of zinc aluminium alloy galvanised steel
Jonathan Elvins et al.
CORROSION SCIENCE (2008)
Monitoring local spatial distribution of Mg2+, pH and ionic currents
S. V. Lamaka et al.
ELECTROCHEMISTRY COMMUNICATIONS (2008)
Investigation of self-healing mechanism on galvanized steels cut edges by coupling SVET and numerical modeling
Florian Thebault et al.
ELECTROCHIMICA ACTA (2008)
Comparative EIS study of different Zn-based intermediate metallic layers in coil-coated steels
R. M. Souto et al.
CORROSION SCIENCE (2006)
Redox competition mode of scanning electrochemical microscopy (RC-SECM) for visualisation of local catalytic activity
Kathrin Eckhard et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2006)
Observation of self-healing functions on the cut edge of galvanized steel using SVET and pH microscopy
K Ogle et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)
Cathodic delamination of coil coatings produced with different Zn-based intermediate metallic layers
RM Souto et al.
PROGRESS IN ORGANIC COATINGS (2005)
Mechanistic changes in cut-edge corrosion induced by variation of organic coating porosity
DA Worsley et al.
CORROSION SCIENCE (2001)
Localized electrochemical methods applied to cut edge corrosion
K Ogle et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2000)
Photoelectrochemical investigation of corrosion using scanning electrochemical techniques
S Bohm et al.
ELECTROCHIMICA ACTA (2000)