Related references
Note: Only part of the references are listed.Lithium disilicate and zirconia reinforced lithium silicate glass-ceramics for CAD/CAM dental restorations: biocompatibility, mechanical and microstructural properties after crystallization
Luan Mavriqi et al.
JOURNAL OF DENTISTRY (2022)
Clinical performance of single implant-supported ceramic and metal-ceramic crowns: A systematic review and meta-analysis of randomized clinical trials
Ahmed Yaseen Alqutaibi et al.
JOURNAL OF PROSTHETIC DENTISTRY (2021)
LIMITED EVIDENCE SUPPORTS POLISHED MONOLITHIC ZIRCONIA AS LESS LIKELY TO CAUSE ANTAGONIST ENAMEL WEAR COMPARED TO OTHER PROSTHETIC MATERIALS
Ahmed Yaseen Alqutaibi
JOURNAL OF EVIDENCE-BASED DENTAL PRACTICE (2020)
Fracture Resistance of Zirconia-Reinforced Lithium Silicate Ceramic Crowns Cemented with Conventional or Adhesive Systems: An In Vitro Study
Gianmaria D'Addazio et al.
MATERIALS (2020)
Randomized Controlled Clinical Trial to Compare Posterior Implant-Supported Modified Monolithic Zirconia and Metal-Ceramic Single Crowns: One-Year Results
Chih-Wen Cheng et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2019)
The progressive wear and abrasiveness of novel graded glass/zirconia materials relative to their dental ceramic counterparts
Marina R. Kaizer et al.
DENTAL MATERIALS (2019)
Wear Behavior of Graded Glass/Zirconia Crowns and Their Antagonists
M. R. Kaizer et al.
JOURNAL OF DENTAL RESEARCH (2019)
A Novel Full-Digital Protocol (SCAN-PLAN-MAKE-DONE®) for the Design and Fabrication of Implant-Supported Monolithic Translucent Zirconia Crowns Cemented on Customized Hybrid Abutments: A Retrospective Clinical Study on 25 Patients
Francesco Mangano et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2019)
Complete rehabilitation of patients with bruxism by veneered and non-veneered zirconia restorations with an increased vertical dimension of occlusion: an observational case-series study
S. Levartovsky et al.
JOURNAL OF PROSTHODONTIC RESEARCH (2019)
CERAMIC AND METAL-CERAMIC RESTORATIONS FOR IMPLANT-SUPPORTED PROSTHESES SHOWED SIMILAR COMPLICATIONS AND FAILURE RATE
Ahmed Yaseen Alqutaibi
JOURNAL OF EVIDENCE-BASED DENTAL PRACTICE (2019)
Retrospective 2-to 7-Year Follow-Up Study of 20 Double Full-Arch Implant-Supported Monolithic Zirconia Fixed Prostheses: Measurements and Recommendations for Optimal Design
Fernando Rojas Vizcaya
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2018)
The Effect of Resin Bonding on Long-Term Success of High-Strength Ceramics
M. B. Blatz et al.
JOURNAL OF DENTAL RESEARCH (2018)
Novel Zirconia Materials in Dentistry
Y. Zhang et al.
JOURNAL OF DENTAL RESEARCH (2018)
Clinical Results and Technical Complications of Posterior Implant-Supported Modified Monolithic Zirconia Single Crowns and Short-Span Fixed Dental Prostheses: A 2-Year Pilot Study
Chih-Wen Cheng et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2018)
Effect of iron oxide coloring agent on the sintering behavior of dental yttria-stabilized zirconia
Ching-Ti Kao et al.
CERAMICS INTERNATIONAL (2018)
Crystallographic and morphological analysis of sandblasted highly translucent dental zirconia
Masanao Inokoshi et al.
DENTAL MATERIALS (2018)
The Conometric Concept: A 5-Year Follow-up of Fixed Partial Monolithic Zirconia Restorations Supported by Cone-in-Cone Abutments
Marco Degidi et al.
INTERNATIONAL JOURNAL OF PERIODONTICS & RESTORATIVE DENTISTRY (2018)
Limited Effect of Cement Material on Stress Distribution of a Monolithic Translucent Zirconia Crown: A Three-Dimensional Finite Element Analysis
Sebastian Franco-Tabares et al.
INTERNATIONAL JOURNAL OF PROSTHODONTICS (2018)
Survival of 2039 complete arch fixed implant-supported zirconia prostheses: A retrospective study
Avinash S. Bidra et al.
JOURNAL OF PROSTHETIC DENTISTRY (2018)
Comparison of the mechanical properties of translucent zirconia and lithium disilicate
Sung Joon Kwon et al.
JOURNAL OF PROSTHETIC DENTISTRY (2018)
Fabricating a custom zirconia post-and-core without a post-and-core pattern or a scan post
Ju-Hyoung Lee
JOURNAL OF PROSTHETIC DENTISTRY (2018)
Ultrathin Monolithic Zirconia Veneers: Reality or Future? Report of a Clinical Case and One-year Follow-up
R. Souza et al.
OPERATIVE DENTISTRY (2018)
Comparison of the effect of monolithic and layered zirconia on natural teeth wear: An in vitro study
Yamini Gundugollu et al.
JOURNAL OF INDIAN PROSTHODONTIC SOCIETY (2018)
Clinical Outcomes of Zirconia Dental Implants: A Systematic Review
S. Pieralli et al.
JOURNAL OF DENTAL RESEARCH (2017)
Zirconia dental implants: where are we now, and where are we heading?
Norbert Cionca et al.
PERIODONTOLOGY 2000 (2017)
Translucent zirconia in the ceramic scenario for monolithic restorations: A flexural strength and translucency comparison test
Michele Carrabba et al.
JOURNAL OF DENTISTRY (2017)
Optical properties of zirconia ceramics for esthetic dental restorations: A systematic review
Reza Shahmiri et al.
JOURNAL OF PROSTHETIC DENTISTRY (2017)
A systematic review of the survival and complication rates of resin-bonded fixed dental prostheses after a mean observation period of at least 5 years
Daniel S. Thoma et al.
CLINICAL ORAL IMPLANTS RESEARCH (2017)
Fabricating CAD/CAM Implant-Retained Mandibular Bar Overdentures: A Clinical and Technical Overview
Chui Ling Goo et al.
CASE REPORTS IN DENTISTRY (2017)
Strength, toughness and aging stability of highly-translucent Y-TZP ceramics for dental restorations
Fei Zhang et al.
DENTAL MATERIALS (2016)
Hydrothermal degradation of a 3Y-TZP translucent dental ceramic: A comparison of numerical predictions with experimental data after 2 years of aging
Maria Cattani-Lorente et al.
DENTAL MATERIALS (2016)
Dentist material selection for single-unit crowns: Findings from the National Dental Practice-Based Research Network
Sonia K. Makhija et al.
JOURNAL OF DENTISTRY (2016)
Outcome of zirconia partial fixed dental prostheses made by predoctoral dental students: A clinical retrospective study after 3 to 7 years of clinical service
Juha Pihlaja et al.
JOURNAL OF PROSTHETIC DENTISTRY (2016)
A comparative evaluation of the translucency of zirconias and lithium disilicate for monolithic restorations
Kosuke Harada et al.
JOURNAL OF PROSTHETIC DENTISTRY (2016)
Fracture rate of monolithic zirconia restorations up to 5 years: A dental laboratory survey
Taiseer A. Sulaiman et al.
JOURNAL OF PROSTHETIC DENTISTRY (2016)
Effect of low-temperature degradation on the mechanical and microstructural properties of tooth-colored 3Y-TZP ceramics
K. Nakamura et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Cleaning Methods for Zirconia Following Salivary Contamination
Pattarika Angkasith et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2016)
Influence of aging on flexural strength of translucent zirconia for monolithic restorations
Brian D. Flinn et al.
JOURNAL OF PROSTHETIC DENTISTRY (2016)
Highly-translucent, strong and aging-resistant 3Y-TZP ceramics for dental restoration by grain boundary segregation
Fei Zhang et al.
ACTA BIOMATERIALIA (2015)
The combined effect of alumina and silica co-doping on the ageing resistance of 3Y-TZP bioceramics
Anastasia Samodurova et al.
ACTA BIOMATERIALIA (2015)
Effect of grain size on the monoclinic transformation, hardness, roughness, and modulus of aged partially stabilized zirconia
Thomas J. Lucas et al.
DENTAL MATERIALS (2015)
All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part II: Multiple-unit FDPs
Bjarni Elvar Pjetursson et al.
DENTAL MATERIALS (2015)
Influence of surface treatment of contaminated zirconia on surface free energy and resin cement bonding
Ryo Ishii et al.
DENTAL MATERIALS JOURNAL (2015)
Translucency and flexural strength of monolithic translucent zirconia and porcelain-layered zirconia
Fumiyori Matsuzaki et al.
DENTAL MATERIALS JOURNAL (2015)
Surface properties of monolithic zirconia after dental adjustment treatments and in vitro wear simulation
Verena Preis et al.
JOURNAL OF DENTISTRY (2015)
Five-year clinical outcome of posterior zirconia ceramic inlay-retained FDPs with a modified design
M. Sad Chaar et al.
JOURNAL OF DENTISTRY (2015)
Degree of conversion of dual-polymerizing cements light polymerized through monolithic zirconia of different thicknesses and types
Taiseer A. Sulaiman et al.
JOURNAL OF PROSTHETIC DENTISTRY (2015)
Critical influence of alumina content on the low temperature degradation of 2-3 mol% yttria-stabilized TZP for dental restorations
F. Zhang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)
The influence of low-temperature degradation and cyclic loading on the fracture resistance of monolithic zirconia molar crowns
K. Nakamura et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Effect of Cleansing Methods on Saliva-Contaminated Zirconia-An Evaluation of Resin Bond Durability
S. A. Feitosa et al.
OPERATIVE DENTISTRY (2015)
Efficacy of various cleaning solutions on saliva-contaminated zirconia for improved resin bonding
Da-Hye Kim et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2015)
Influence of air-particle deposition protocols on the surface topography and adhesion of resin cement to zirconia
Hugo R. Sarmento et al.
ACTA ODONTOLOGICA SCANDINAVICA (2014)
Fracture strength of monolithic all-ceramic crowns made of high translucent yttrium oxide-stabilized zirconium dioxide compared to porcelain-veneered crowns and lithium disilicate crowns
Camilla Johansson et al.
ACTA ODONTOLOGICA SCANDINAVICA (2014)
Wear behavior between zirconia and titanium as an antagonist on fixed dental prostheses
Tsunemichi Kanbara et al.
BIOMEDICAL MATERIALS (2014)
Making yttria-stabilized tetragonal zirconia translucent
Yu Zhang
DENTAL MATERIALS (2014)
Influence of sintering conditions on low-temperature degradation of dental zirconia
Masanao Inokoshi et al.
DENTAL MATERIALS (2014)
Fracture Resistance of a Selection of Full-Contour All-Ceramic Crowns: An In Vitro Study
Tim F. Zesewitz et al.
INTERNATIONAL JOURNAL OF PROSTHODONTICS (2014)
Emerging Ceramic-based Materials for Dentistry
I. Denry et al.
JOURNAL OF DENTAL RESEARCH (2014)
Meta-analysis of Bonding Effectiveness to Zirconia Ceramics
M. Inokoshi et al.
JOURNAL OF DENTAL RESEARCH (2014)
Quantification of the amount of light passing through zirconia: The effect of material shade, thickness, and curing conditions
Nicoleta Ilie et al.
JOURNAL OF DENTISTRY (2014)
Survival of anterior cantilevered all-ceramic resin-bonded fixed dental prostheses made from zirconia ceramic
Martin Sasse et al.
JOURNAL OF DENTISTRY (2014)
Enamel wear caused by monolithic zirconia crowns after 6months of clinical use
T. Stober et al.
JOURNAL OF ORAL REHABILITATION (2014)
Preparation of Transparent 3Y-TZP Nanoceramics with No Low-Temperature Degradation
Yan Xiong et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)
Complications and Patient-Centered Outcomes with an Implant-Supported Monolithic Zirconia Fixed Dental Prosthesis: 1 Year Results
Bryan Limmer et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2014)
Comparative analysis of transmittance for different types of commercially available zirconia and lithium disilicate materials
Husain Hatim Harianawala et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2014)
Surface roughness of zirconia for full-contour crowns after clinically simulated grinding and polishing
Rim Hmaidouch et al.
INTERNATIONAL JOURNAL OF ORAL SCIENCE (2014)
Two-body wear of monolithic, veneered and glazed zirconia and their corresponding enamel antagonists
Bogna Stawarczyk et al.
ACTA ODONTOLOGICA SCANDINAVICA (2013)
The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio
Bogna Stawarczyk et al.
CLINICAL ORAL INVESTIGATIONS (2013)
Five-year clinical evaluation of zirconia-based bridges in patients in UK general dental practices
F. J. T. Burke et al.
JOURNAL OF DENTISTRY (2013)
Effect of air-particle abrasion protocols on the biaxial flexural strength, surface characteristics and phase transformation of zirconia after cyclic loading
Mutlu Oezcan et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2013)
Wear characteristics of current aesthetic dental restorative CAD/CAM materials: Two-body wear, gloss retention, roughness and Martens hardness
Werner H. Moermann et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2013)
Degree of conversion of two dual-cured resin cements light-irradiated through zirconia ceramic disks
Min-Jeong Kim et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2013)
Zirconia in Fixed Implant Prosthodontics
Petra Christine Guess et al.
CLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH (2012)
Effect of curing mode on the micro-mechanical properties of dual-cured self-adhesive resin cements
Nicoleta Ilie et al.
CLINICAL ORAL INVESTIGATIONS (2012)
Five-year prospective clinical study of posterior three-unit zirconia-based fixed dental prostheses
Roberto Sorrentino et al.
CLINICAL ORAL INVESTIGATIONS (2012)
In vitro performance of full-contour zirconia single crowns
Florian Beuer et al.
DENTAL MATERIALS (2012)
The influence of grain size on low-temperature degradation of dental zirconia
Lubica Hallmann et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2012)
Effect of Alumina Dopant on Transparency of Tetragonal Zirconia
Haibin Zhang et al.
JOURNAL OF NANOMATERIALS (2012)
Influence of Low-Temperature Environmental Exposure on the Mechanical Properties and Structural Stability of Dental Zirconia
Tariq F. Alghazzawi et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2012)
Subsurface evaluation of hydrothermal degradation of zirconia
J. A. Munoz-Tabares et al.
ACTA MATERIALIA (2011)
Fatigue behavior in water of Y-TZP zirconia ceramics after abrasion with 30 μm silica-coated alumina particles
Susanne S. Scherrer et al.
DENTAL MATERIALS (2011)
Adhesion/cementation to zirconia and other non-silicate ceramics: Where are we now?
Jeffrey Y. Thompson et al.
DENTAL MATERIALS (2011)
Performance of Dental Ceramics: Challenges for Improvements
E. D. Rekow et al.
JOURNAL OF DENTAL RESEARCH (2011)
Damage and Reliability of Y-TZP after Cementation Surface Treatment
P. C. Guess et al.
JOURNAL OF DENTAL RESEARCH (2010)
TWO-BODY WEAR OF DIFFERENT CERAMIC MATERIALS OPPOSED TO ZIRCONIA CERAMIC
Zakereyya S. M. Albashaireh et al.
JOURNAL OF PROSTHETIC DENTISTRY (2010)
TRANSLUCENCY OF ZIRCONIA COPINGS MADE WITH DIFFERENT CAD/CAM SYSTEMS
Paolo Baldissara et al.
JOURNAL OF PROSTHETIC DENTISTRY (2010)
Current status of zirconia-based fixed restorations
Futoshi Komine et al.
Journal of Oral Science (2010)
Measurement of translucency of tooth enamel and dentin
Bin Yu et al.
ACTA ODONTOLOGICA SCANDINAVICA (2009)
A systematic review of the performance of ceramic and metal implant abutments supporting fixed implant reconstructions
Irena Sailer et al.
CLINICAL ORAL IMPLANTS RESEARCH (2009)
A review of dental CAD/CAM: current status and future perspectives from 20 years of experience
Takashi Miyazaki et al.
DENTAL MATERIALS JOURNAL (2009)
Optical properties of transparent nanocrystalline yttria stabilized zirconia
J. E. Alaniz et al.
OPTICAL MATERIALS (2009)
Effect of shading the zirconia framework on biaxial strength and surface microhardness
Jenni Hjerppe et al.
ACTA ODONTOLOGICA SCANDINAVICA (2008)
The anterior all-ceramic crown: a rationale for the choice of ceramic and cement
B. Mizrahi
BRITISH DENTAL JOURNAL (2008)
Influence of saliva contamination on zirconia ceramic bonding
B. Yang et al.
DENTAL MATERIALS (2008)
State of the art of zirconia for dental applications
Isabelle Denry et al.
DENTAL MATERIALS (2008)
Stabilized zirconia as a structural ceramic: An overview
J. Robert Kelly et al.
DENTAL MATERIALS (2008)
Ceramics as biomaterials for dental restoration
Wolfram Hoeland et al.
EXPERT REVIEW OF MEDICAL DEVICES (2008)
Biaxial Flexure Strength and Low Temperature Degradation of Ce-TZP/Al2O3 Nanocomposite and Y-TZP as Dental Restoratives
Seiji Ban et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2008)
Posterior Implant Single-Tooth Replacement and Status of Adjacent Teeth During a 10-Year Period: A Retrospective Report
Carl E. Misch et al.
JOURNAL OF PERIODONTOLOGY (2008)
Phase transformation., roughness, and microhardness of artificially aged yttria- and magnesia-stabilized zirconia femoral heads
M. E. Roy et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
Fabrication of a custom-made ceramic post and core using CAD-CAM technology
Mohamed Abdelmageed Awad et al.
JOURNAL OF PROSTHETIC DENTISTRY (2007)
A systematic review of the survival and complication rates of all-ceramic and metal-ceramic reconstructions after an observation period of at least 3 years.: Part II:: fixed dental prostheses
Irena Sailer et al.
CLINICAL ORAL IMPLANTS RESEARCH (2007)
Panavia F 2.0 bonding to contaminated zirconia ceramic after different cleaning procedures
A. C. Quaas et al.
DENTAL MATERIALS (2007)
Influence of surface finish and residual stresses on the ageing sensitivity of biomedical grade zirconia
S Deville et al.
BIOMATERIALS (2006)
What future for zirconia as a biomaterial?
J Chevalier
BIOMATERIALS (2006)
The effect of ceramic surface treatment on bonding to densely sintered alumina ceramic
LF Valandro et al.
JOURNAL OF PROSTHETIC DENTISTRY (2005)
Contemporary materials and technologies for all-ceramic fixed partial dentures: A review of the literature
AJ Raigrodski
JOURNAL OF PROSTHETIC DENTISTRY (2004)
Influence of cyclic loading and luting agents on the fracture load of two all-ceramic crown systems
A Attia et al.
JOURNAL OF PROSTHETIC DENTISTRY (2004)
Critical effect of cubic phase on aging in 3 mol% yttria-stabilized zirconia ceramics for hip replacement prosthesis
J Chevalier et al.
BIOMATERIALS (2004)
Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics
M Guazzato et al.
DENTAL MATERIALS (2004)
Light transmission through all-ceramic dental materials: A pilot study
FH Rasetto et al.
JOURNAL OF PROSTHETIC DENTISTRY (2004)
In vivo fracture resistance of implant-supported all-ceramic restorations
M Yildirim et al.
JOURNAL OF PROSTHETIC DENTISTRY (2003)
Properties of dual-curable luting composites polymerized with single and dual curing modes
N Tanoue et al.
JOURNAL OF ORAL REHABILITATION (2003)
Wear of dental resin composites: Insights into underlying processes and assessment methods - A review
CP Turssi et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2003)
Resin-ceramic bonding: a review of the literature
MB Blatz et al.
JOURNAL OF PROSTHETIC DENTISTRY (2003)
Transparent alumina: A light-scattering model
R Apetz et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2003)
Relative translucency of six all-ceramic systems. Part I: Core materials
MJ Heffernan et al.
JOURNAL OF PROSTHETIC DENTISTRY (2002)
Relative translucency of six all-ceramic systems. Part II: Core and veneer materials
MJ Heffernan et al.
JOURNAL OF PROSTHETIC DENTISTRY (2002)
Factors affecting enamel and ceramic wear: A literature review
WS Oh et al.
JOURNAL OF PROSTHETIC DENTISTRY (2002)
Evolution of dental ceramics in the twentieth century
JW McLean
JOURNAL OF PROSTHETIC DENTISTRY (2001)