Related references
Note: Only part of the references are listed.Evaluation of the Mechanical and Electromagnetic Shielding Properties of Carbon Fiber Reinforced Thermoplastics Sheet Made of Unidirectional Tape
Asep Bustanil Aripin et al.
MATERIALS TRANSACTIONS (2020)
Electromagnetic Shielding Effectiveness and Conductivity of PTFE/Ag/MWCNT Conductive Fabrics Using the Screen Printing Method
Hung-Chuan Cheng et al.
SUSTAINABILITY (2020)
Adhesion of sputter-deposited Cu/Ti film on plasma-treated polymer substrate
Yoong Oh et al.
THIN SOLID FILMS (2016)
Surface modification of an epoxy resin with polyamines and polydopamine: Adhesion toward electroless deposited copper
David Schaubroeck et al.
APPLIED SURFACE SCIENCE (2015)
Low-Temperature Sintering Bonding Using Silver Nanoparticle Paste for Electronics Packaging
Wei Guo et al.
JOURNAL OF NANOMATERIALS (2015)
A study of adhesive improvement of a Cr-Ni alloy layer on a polyimide surface by low pressure gas plasma modification
Kyoko Miyauchi et al.
PROGRESS IN ORGANIC COATINGS (2013)
An elevated temperature study of a Ti adhesion layer on polyimide
A. A. Taylor et al.
THIN SOLID FILMS (2013)
Electroless nickel deposition on silane modified bamboo fabric through silver, copper or nickel activation
Yinxiang Lu et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Electromagnetic shielding and corrosion resistance of electroless Ni-P/Cu-Ni multilayer plated polyester fabric
S. X. Jiang et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Effect of Cr Thickness on Adhesion Strength of Cu/Cr/Polyimide Flexible Copper Clad Laminate Fabricated by Roll-to-Roll Process
Bo-In Noh et al.
MATERIALS TRANSACTIONS (2010)
Ultrasonic-assisted electroless deposition of Ag on PET fabric with low silver content for EMI shielding
Yinxiang Lu et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Plasma surface treatment of polyimide for adhesive Cu/80Ni20Cr/PI flexible copper clad laminate
Jun Sun Eom et al.
THIN SOLID FILMS (2008)
Rapid treatment of polyimide film surfaces using high-density microwave plasma for enhancement of Cu layer adhesion
Y. Takagi et al.
VACUUM (2008)
The effects of Cr oxidation and polyimide degradation on interface adhesion strength in Cu/Cr/polyimide flexible films
T. Miyamura et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
A comparison of the corrosion resistance of Cu-Ni-stainless steel multilayers used for EMI shielding
Yoon-Seok Choi et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Effect of surface roughness on the adhesion properties of Cu/Cr films on polyimide substrate treated by inductively coupled oxygen plasma
SH Kim et al.
SURFACE & COATINGS TECHNOLOGY (2005)
The properties of copper films deposited on polyimide by nitrogen and oxygen plasma pre-treatment
CH Yang et al.
APPLIED SURFACE SCIENCE (2005)
Adhesion properties of Cu/Cr films on polyimide substrate treated by dielectric barrier discharge plasma
SH Kim et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Electromagnetic interference (EMI) of system-on-package (SOP)
T Sudo et al.
IEEE TRANSACTIONS ON ADVANCED PACKAGING (2004)
Surface modification and characterization of photodefinable epoxy/copper systems
J Ge et al.
THIN SOLID FILMS (2003)
Analysis of the T-peel strength in a Cu/Cr/polyimide system
JY Song et al.
ACTA MATERIALIA (2002)