☆ 4.7 Article

Outstanding ductility of flash-butt welded Inconel 718 joints after post-weld heat treatment

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Effect of cooling recrystallization annealing treatment on properties of an initial aged deformed GH4169 superalloy

Ming-Song Chen et al.

Summary: The novel double-stage heat treatment method can effectively refine and homogenize the deformed coarse grains, enhancing the hardness and strength of the GH4169 alloy. Among the CRT parameters, the initial temperature has a significant impact on the grain size, while the hardness and strength are mainly influenced by the average grain size.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Nanoscience & Nanotechnology

The effect of homogenization temperature on the microstructure and high temperature mechanical performance of SLM-fabricated IN718 alloy

Ming Cao et al.

Summary: This study investigated the microstructure and mechanical performances of Inconel 718 at elevated temperature, utilizing heat treatment methods to regulate the microstructure and optimize mechanical properties. The results showed that heat-treated samples exhibited superior creep rupture performance and tensile strength compared to wrought samples, with a specific heat treatment scheme yielding the best mechanical properties at 650 degrees C.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of post-weld heat treatment on mechanical properties of local weld-affected zones in friction stir welded AZ31 plates

Gukin Han et al.

Summary: This study investigated the mechanical, microstructural, and textural characteristics of friction stir welded AZ31 magnesium alloy plates, finding that annealing at specific temperatures led to reductions in yield strength but improvements in tensile strength and elongation. The analysis showed a correlation between dislocation density, grain growth trends, and mechanical properties in different zones.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Review Engineering, Industrial

Future research directions in the machining of Inconel 718

Andrea De Bartolomeis et al.

Summary: Inconel 718 is a popular nickel-based superalloy extensively used in aerospace, automotive, and energy industries. However, machining of Inconel 718 remains challenging due to its short tool life and low productivity. Recent advances in cutting tool materials, coatings, geometries, and surface texturing for machining Inconel 718 have been reviewed, with a focus on the thermal conductivity of cutting tool materials. Process control based on sensor data for monitoring machining and detecting anomalies has been identified as crucial for machining safety critical components.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Analysis of strain-induced precipitates by delta-processing in Inconel 718 superalloy

Pedro Jacinto Paramo-Kanetas et al.

Summary: Delta-Processing is used to control grain growth during hot deformation of the Ni-base superalloy Inconel 718. This study investigates the precipitation of M23C6 carbides and their interaction with recrystallization phenomena after the alloy has been saturated with delta-phase. Double-strain hot compression tests were conducted to analyze the softening/hardening progress over time, with microstructural characterization using SEM and XRD to identify precipitating/dissolving phases.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of laser shock peening on microstructure and mechanical properties of TIG welded alloy 600 joints

Zhandong Wan et al.

Summary: Laser shock peening (LSP) is an effective surface strengthening technology for post-weld treatment, enhancing mechanical properties such as microhardness and dislocation density. While peening on the full gauge part of welded joints improves tensile strength and yield strength, better fatigue life improvement is achieved by peening only on the fusion zone and heat affected zone.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Multidisciplinary Sciences

Grain boundary velocity and curvature are not correlated in Ni polycrystals

Aditi Bhattacharya et al.

Summary: Grain boundary velocity and curvature may not be correlated, but are more related to grain boundary crystallography. The sensitivity of velocity to grain boundary crystallography might be the result of defect-mediated grain boundary migration or the anisotropy of grain boundary energy. The lack of correlation between velocity and curvature is likely due to the constraints imposed by the grain boundary network.

SCIENCE (2021)

Add to Collection

Review Materials Science, Multidisciplinary

An overview on welding of Inconel 718 alloy-Effect of welding processes on microstructural evolution and mechanical properties of joints

Tushar Sonar et al.

Summary: Inconel 718 alloy, widely used in the aerospace sector, is susceptible to metallurgical issues during welding, impacting the performance of joints. Measures such as reducing heat input and increasing cooling rate are needed to mitigate these issues.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Article Nanoscience & Nanotechnology

The effects of shot peening, laser shock peening and ultrasonic nanocrystal surface modification on the fatigue strength of Inconel 718

Erfan Maleki et al.

Summary: Using different surface treatment techniques can effectively improve the material performance and lifetime of nickel-based super-alloy Inconel 718. Increasing the kinetic energy of the surface treatments can promote grain refinement and induce deep compressive residual stress, thus enhancing fatigue performance. Ultrasonic nanocrystal surface modification is the most efficient surface treatment method.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Engineering, Manufacturing

Study on hot cracking in laser welded joints of inconel 718 alloy foils

Jian Lin et al.

Summary: Pulsed laser welding was used to join ultra thin Inconel 718 alloy foils, where joint geometry and hot cracking were observed and the effect of heat input on crack length was investigated. The crack initiation and propagation were main reasons presented in the study, with crack length being reducible by applying low heat input.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of gradient microstructure pinned by 6 phase on elevated temperature performances of GH4169

Rongshen Huang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Hydrogen and molybdenum control on laves phase formation and tensile properties of inconel 718 GTA welds

N. Anbarasan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure, precipitates and mechanical properties of Inconel 718 alloy produced by two-stage cold rolling method

Rong Ran et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

The effect of δ phase on the microplasticity evolution of a heat-treated nickel base superalloy

Guang-Jian Yuan et al.

MECHANICS OF MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Back-stress-induced strengthening and strain hardening in dual-phase steel

X. L. Liu et al.

MATERIALIA (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical properties and optimal grain size distribution profile of gradient grained nickel

Y. Lin et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Engineering, Industrial

Flash butt weldability of Inconel718 alloy

Xueru Zhu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of different heat treatments on the dynamic shear response and shear localization in Inconel 718 alloy

Wei-dong Song et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure evolution and mechanical properties of flash butt-welded, Inconel718 joints

Jialin Shen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of solution treatment on deep drawability of IN718 sheets: Experimental analysis and metallurgical characterization

K. S. Prasad et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Automation & Control Systems

Mechanical properties and microstructural evolution of in-service Inconel 718 superalloy repaired by linear friction welding

M. Smith et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Fatigue behavior and bilinear Coffin-Manson plots of Ni-based GH4169 alloy with different volume fractions of δ phase

Xian-Cheng Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Synergetic strengthening far beyond rule of mixtures in gradient structured aluminum rod

Jordan Moering et al.

SCRIPTA MATERIALIA (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructures and mechanical properties of flash butt welded high strength steel joints

Chenyao Xi et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural evolution and constitutive equations of Inconel 718 alloy under quasi-static and quasi-dynamic conditions

M. Azarbarmas et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Chemistry, Physical

Effects of cold rolling on the precipitation kinetics and the morphology evolution of intermediate phases in Inconel 718 alloy

Yunpeng Mei et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of δ Phase on Mechanical Properties of GH4169 Alloy at Room Temperature

Neng-yong Ye et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2015)

Add to Collection

Article Engineering, Manufacturing

Effect of filler wires and direct ageing on the microstructure and mechanical properties in the multi-pass welding of Inconel 718

K. Devendranath Ramkumar et al.

JOURNAL OF MANUFACTURING PROCESSES (2015)

Add to Collection

Article Multidisciplinary Sciences

Extraordinary strain hardening by gradient structure

XiaoLei Wu et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2014)

Add to Collection

Article Materials Science, Multidisciplinary

The Effect of δ Phase on the Mechanical Properties of an Inconel 718 Superalloy

L. C. M. Valle et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of friction welded alloy 718

R. Damodaram et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of different processing technologies and heat treatments on the microstructure and creep behavior of GH4169 superalloy

H. Y. Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of the δ phase on the deformation behavior in isothermal compression of superalloy GH4169

K. Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

Add to Collection

Article Chemistry, Physical

Microstructural and mechanical properties of friction-stir-welded and post-heat-treated Inconel 718 alloy

K. H. Song et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

Add to Collection

Article Nanoscience & Nanotechnology

Precipitation of γ′ phase in δ-precipitated Alloy 718 during deformation at elevated temperatures

S. A. Nalawade et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Delta phase precipitation in Inconel 718

S Azadian et al.

MATERIALS CHARACTERIZATION (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.