Related references
Note: Only part of the references are listed.Utilizing Additive Friction Stir Processing to Fabricate B4C Reinforced Ti-6Al-4V Matrix Surface Composite: Microstructure Refinement and Enhancement in Mechanical Properties
H. A. Deore et al.
METALS AND MATERIALS INTERNATIONAL (2022)
Improvement on Mechanical Properties of a bcc Matrix Al8(FeCuCrMn)92 High-Entropy Alloy by Phase Modulation of Interstitial Carbon Element
Conghui Hu et al.
METALS AND MATERIALS INTERNATIONAL (2022)
Lightweight, Refractory High-Entropy Alloy, CrNbTa0.25TiZr, with High Yield Strength
Jiaojiao Yi et al.
METALS AND MATERIALS INTERNATIONAL (2022)
Mechanical Properties and Deformation Mechanisms of Heterostructured High-Entropy and Medium-Entropy Alloys: A Review
Wei Jiang et al.
FRONTIERS IN MATERIALS (2022)
Enhancing mechanical properties of the boron doped Al0.2Co1.5CrFeNi1.5Ti0.5 high entropy alloy via tuning composition and microstructure
Benbin Xin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
Creep Properties of Intercritical Heat Treated Boron Added Modified 9Cr-1Mo Steel
T. Sakthivel et al.
METALS AND MATERIALS INTERNATIONAL (2021)
Effect of Boron on the Thermal Stability of the Precipitate Phase of FC92B and FC92N Steels During Aging and Creep
Eun Hee Jeong et al.
METALS AND MATERIALS INTERNATIONAL (2021)
Effect of Microstructural Features on the High-Cycle Fatigue Behavior of CoCrFeMnNi High-Entropy Alloys Deformed at Room and Cryogenic Temperatures
Gyung Tae Lee et al.
METALS AND MATERIALS INTERNATIONAL (2021)
Superior antifouling properties of a CoCrFeMnNi high-entropy alloy
Sujung Son et al.
MATERIALS LETTERS (2021)
Synergetic strengthening from grain refinement and nano-scale precipitates in non-equiatomic CoCrFeNiMo medium-entropy alloy
Hyeonseok Kwon et al.
INTERMETALLICS (2021)
Enhancing the strength and ductility of CoCrFeMnNi high-entropy alloy by nitrogen addition
Yu Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Carbon and nitrogen co-doping enhances phase stability and mechanical properties of a metastable high-entropy alloy
Wanying Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Effect of nitrogen on mechanical properties of CoCrFeMnNi high entropy alloy at room and cryogenic temperatures
M. Klimova et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Towards ferrous medium-entropy alloys with low-cost and high-performance
Jae Wung Bae et al.
SCRIPTA MATERIALIA (2020)
Using transmission Kikuchi diffraction in a scanning electron microscope to quantify geometrically necessary dislocation density at the nanoscale
X. Z. Liang et al.
ULTRAMICROSCOPY (2019)
FCC to BCC transformation-induced plasticity based on thermodynamic phase stability in novel V10Cr10Fe45CoxNi35-x medium-entropy alloys
Y. H. Jo et al.
SCIENTIFIC REPORTS (2019)
On the mechanism of extraordinary strain hardening in an interstitial high-entropy alloy under cryogenic conditions
Zhangwei Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Superior cryogenic tensile properties of ultrafine-grained CoCrNi medium-entropy alloy produced by high-pressure torsion and annealing
Praveen Sathiyamoorthi et al.
SCRIPTA MATERIALIA (2019)
Exceptional cryogenic strength-ductility synergy in Al0.3CoCrNi medium-entropy alloy through heterogeneous grain structure and nano-scale precipitates
Praveen Sathiyamoorthi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Boron doped ultrastrong and ductile high-entropy alloys
Jae Bok Seol et al.
ACTA MATERIALIA (2018)
Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution
Hong Luo et al.
CORROSION SCIENCE (2018)
Effects of N addition on microstructure and mechanical properties of CoCrFeNiMn high entropy alloy produced by mechanical alloying and vacuum hot pressing sintering
Yanchong Xie et al.
INTERMETALLICS (2018)
The strengthening effect of boron interstitial supersaturated solid solution on aluminum films
Hailong Shang et al.
MATERIALS LETTERS (2017)
The effect of carbon on the microstructures, mechanical properties, and deformation mechanisms of thermo-mechanically treated Fe40.4Ni11.3Mn34.8Al17.5Cr6 high entropy alloys
Zhangwei Wang et al.
ACTA MATERIALIA (2017)
Microstructural stability and mechanical behavior of FeNiMnCr high entropy alloy under ion irradiation
N. A. P. Kiran Kumar et al.
ACTA MATERIALIA (2016)
A fracture-resistant high-entropy alloy for cryogenic applications
Bernd Gludovatz et al.
SCIENCE (2014)
The effects of N on the microstructures and tensile properties of Fe-15Mn-0.6C-2Cr-xN twinning-induced plasticity steels
Yeon-Seung Jung et al.
ACTA MATERIALIA (2013)
Effect of grain size on tensile properties of fine-grained metastable β titanium alloys fabricated by stress-induced martensite and its reverse transformations
Ming-Hui Cai et al.
SCRIPTA MATERIALIA (2012)
Void initiation at TiN precipitates in IF steels during tensile deformation
Orlando Leon-Garcia et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Effect of annealing temperature on the pitting corrosion resistance of super duplex stainless steel UNS S32750
Hua Tan et al.
MATERIALS CHARACTERIZATION (2009)
The effect of boron on the corrosion resistance of the high entropy alloys Al0.5CoCrCuFeNiBx
C. P. Lee et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)
Self-healing effect of boron nitride precipitation on creep cavitation in austenitic stainless steel
N. Shinya et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2006)
Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl0.5Fe alloy with boron addition
CY Hsu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Microstructural development in equiatomic multicomponent alloys
B Cantor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Filling boron nitride nanotubes with metals
D Golberg et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2003)
Viewpoint: experimental recovery of geometrically necessary dislocation density in polycrystals
BS El-Dasher et al.
SCRIPTA MATERIALIA (2003)
Effect of Zr, B and C additions on the ductility of molybdenum
MK Miller et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)