☆ 4.7 Article

Enhanced mechanical properties of a metastable β titanium alloy via optimized thermomechanical processing

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Deformation microstructure and thermomechanical processing maps of homogenized AA2070 aluminum alloy

Jiashi Miao et al.

Summary: The hot deformation behavior of homogenized AA2070 Al-Li-Cu alloy was studied, and it was found that dynamic precipitation of T-1 phase causes back stress at temperatures below 400°C, while intermetallic phases gradually dissolve at temperatures above 400°C, leading to dominant dynamic recrystallization as the softening mechanism.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Chemistry, Physical

Microstructure and tensile properties of a cost-affordable and ultrahigh-strength metastable β titanium alloy with a composition of Ti-6Al-1Mo-1Fe-6.9Cr

Chaoyi Ding et al.

Summary: A cost-affordable and ultrahigh-strength metastable beta titanium alloy has been designed by high-throughput diffusion couple technique. The effects of heat treatments on phase transformation, microstructure evolution, and tensile properties were investigated. Excellent strength-ductility combinations were obtained by choosing appropriate heat treatment schemes.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Engineering, Mechanical

A dislocation-based model for the microstructure evolution and the flow stress of a Ti5553 alloy

Ricardo Henrique Buzolin et al.

Summary: The plastic deformation at high temperatures of two-phase titanium alloys is modelled using a mesoscale approach, taking into account the complex interactions between different populations of dislocation densities. Experimental validation shows that flow softening is related to changes in load partitioning, and the model predicts well the trends of grain and subgrain size changes with strain rate and temperature, as well as the evolution from static recrystallized microstructure to continuous dynamic recrystallized one.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

The interplay relationship between phase transformation and deformation behavior during hot compression in a metastable β titanium alloy

Ke Hua et al.

Summary: The hot compression behavior of a metastable beta titanium alloy at 600 degrees C was investigated to analyze the correlation between phase transformation and deformation behavior. The study revealed the presence of four distinct stages in the deformation behavior: near linear hardening, discontinuous yielding, hardening after discontinuous yielding, and final softening. The phase transformation and movement of dislocations play crucial roles in the hardening and softening behavior at different stages of deformation.

MATERIALS & DESIGN (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Morphology characteristics of α precipitates related to the crystal defects and the strain accommodation of variant selection in a metastable α titanium alloy

Ruifeng Dong et al.

Summary: The research highlights the evolution of alpha precipitates from dot-like to lath-like, V-shaped clusters, or triangular ones during aging treatment. The study also confirms that variant selection of alpha precipitates induced by the transformation strain and the interplay between alpha variants and the dislocations are key factors for the formation of these morphologies.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

The formation of microtextured region during thermo-mechanical processing in a near-β titanium alloy Ti-5Al-5Mo-5V-1Cr-1Fe

Zhan Hu et al.

Summary: By using EBSD and BSE, the study investigated the origin of microtextured region and the impact of thermo-mechanical processing on macro/microtexture in near-β titanium alloys. The results showed that the formation of microtextured region was related to the Burgers Orientation Relationship between α/β and variant selection mechanism.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Cost-affordable and qualified powder metallurgy metastable beta titanium alloy by designing short-process consolidation and processing

Qinyang Zhao et al.

Summary: A short-time processing route has been designed to manufacture cost-affordable and high-quality powder metallurgy (PM) metastable beta titanium alloy, achieving homogeneous macrostructure and fine-grain microstructure. The alloy demonstrates synergistic strength-ductility combinations after specific processing and heat treatment, with comparable or even better performance than other alloys prepared by traditional methods.

MATERIALS & DESIGN (2021)

Add to Collection

Article Materials Science, Multidisciplinary

New insight into deformation induced α variant selection in a metastable β titanium alloy during isothermal compression at 600 °C

Ke Hua et al.

Summary: The study found that during compression of the Ti-7Mo-3Nb-3Cr-3Al alloy, the selection of alpha variants is strongly influenced by imposed strain and load, depending on the effective strain distribution induced by macroscopic shape deformation. Four Burgers orientation relationship variants were selected in the center region of the sample, while only two variants were selected in the edge region.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Chemistry, Physical

Microstructural evolution in Ti-37 mol%Nb alloy under uniaxial compression at high temperatures

Yujiro Hayakawa et al.

Summary: Uniaxial compression tests were performed on Ti-37 mol%Nb alloy at various temperatures and strain rates, revealing the evolution of different textures under different conditions. The preferential dynamic grain growth mechanism was observed, with the deformation stress showing correspondence with the deformed structure and texture. The evolution of {001} fiber texture was attributed to grain boundary migration, leading to predominant recovery of {001} grains during high-temperature deformation.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Crystallography and microstructure of the deformation bands formed in a metastable β titanium alloy during isothermal compression

Ke Hua et al.

Summary: This study investigated the crystallography and microstructure of deformation bands formed in a metastable beta titanium alloy during isothermal compression. The majority of the bands were located inside the beta grains and along the grain boundaries, belonging to the {110} 111 slip band type with high Schmid factors. The formation of bands was found to be caused by relative slip of lamellar beta and alpha phases under compression.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Article Nanoscience & Nanotechnology

In-situ study on tensile deformation and damage evolution of metastable β titanium alloy with lamellar microstructure

Jing Wang et al.

Summary: The study found that the metastable beta titanium alloy exhibits various deformation modes during tensile process, including dislocation slip, phase interface shear, and grain boundary shear. Due to localized stress concentration and inhomogeneous deformation, microvoids are prone to form at positions such as grain boundaries, phase interfaces, tips of beta interlayers, etc. Additionally, crack propagation follows a zigzag path resulting in an intergranular and transgranular mixed fracture mode.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Accelerated flow softening and dynamic transformation of Ti-6Al-4V alloy in two-phase region during hot deformation via coarsening α grain

Xiankun Ji et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Post-dynamic α to β phase transformation and reverse transformation of Ti-5Al-3V alloy after hot deformation in two phase region

Xiankun Ji et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Materials Science, Multidisciplinary

New insights into the microstructural evolution of Ti-5Al-5Mo-5V-3Cr alloy during hot working

B. Callegari et al.

MATERIALS CHARACTERIZATION (2020)

Add to Collection

Article Chemistry, Physical

Microstructure, texture and hardness of a metastable β-titanium alloy after bar-rolling and annealing

B. Gu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Further optimization of strength and ductility in a harmonic structure designed pure copper via thermomechanical processing

Guodong Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Chemistry, Physical

Improved Predictability of Microstructure Evolution during Hot Deformation of Titanium Alloys

Ricardo Henrique Buzolin et al.

MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Slip behavior of Bi-modal structure in a metastable β titanium alloy during tensile deformation

Wenguang Zhu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Engineering, Mechanical

Hot deformation behavior originated from dislocation activity and β to α phase transformation in a metastable β titanium alloy

Ke Hua et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of thermal annealing on the microstructure, mechanical properties and residual stress relaxation of pure titanium after deep rolling treatment

Jie Huang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Comparison of hot deformation behaviour and microstructural evolution for Ti-5Al-5V-5Mo-3Cr alloys prepared by powder metallurgy and ingot metallurgy approaches

Qinyang Zhao et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Yielding nature and Hall-Petch relationships in Ti-6Al-4V alloy with fully equiaxed and bimodal microstructures

Yan Chong et al.

SCRIPTA MATERIALIA (2019)

Add to Collection

Article Chemistry, Physical

Unified modeling of work hardening and flow softening in two-phase titanium alloys considering microstructure evolution in thermomechanical processes

J. Guo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Improvement of ductility in Ti-5Al-5Mo-5V-3Cr alloy by network-like precipitation of blocky α phase

Baozhen Jiang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Correlation between imposed deformation and transformation lattice strain on alpha variant selection in a metastable beta-Ti alloy under isothermal compression

Ke Hua et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Formation and crystallography of nano/ultrafine-trimorphic structure in metastable β titanium alloy Ti-5Al-5Mo-5V-3Cr-0.5Fe processed by dynamic deformation at low temperature

Jiangkun Fan et al.

MATERIALS CHARACTERIZATION (2017)

Add to Collection

Article Materials Science, Multidisciplinary

On recrystallization of the α and β phases in titanium alloys

Shanoob Balachandran et al.

ACTA MATERIALIA (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Refinement of lamellar structures in Ti-Al alloy

Dai-Xiu Wei et al.

ACTA MATERIALIA (2017)

Add to Collection

Article Chemistry, Physical

Hot forging design and microstructure evolution of a high Nb containing TiAl alloy

Bin Tang et al.

INTERMETALLICS (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Relationship between constant-load creep, decreasing-load creep and stress relaxation of titanium alloy

Po Liu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Investigation on high temperature short-term creep and stress relaxation of titanium alloy

Yingying Zong et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Add to Collection

Article Engineering, Mechanical

Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations

C. C. Tasan et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

Add to Collection

Article Chemistry, Physical

Characterization of hot deformation microstructure of a near beta titanium alloy Ti-5553

Ke Hua et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Add to Collection

Article Engineering, Industrial

Quantitative analysis of the microstructure of near β titanium alloy during compression tests

F. Warchomicka et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)

Add to Collection

Article Physics, Applied

Metastable phase formation during α2(D019) to γ(L10) transformation in as-atomized γ-TiAl alloy powders

M Karadge et al.

APPLIED PHYSICS LETTERS (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Recovery, recrystallization and phase transformations during thermomechanical processing and treatment of TiAl-based alloys

WJ Zhang et al.

ACTA MATERIALIA (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.