Related references
Note: Only part of the references are listed.Selective laser melting of Cu-Ni-Sn: A comprehensive study on the microstructure, mechanical properties, and deformation behavior
Chao Zhao et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Microstructural evaluation of iron oxide nanoparticles at different calcination temperature by Scherrer, Williamson-Hall, Size-Strain Plot and Halder-Wagner methods
Pratishtha Kushwaha et al.
PHASE TRANSITIONS (2021)
Work hardening discrepancy designing to strengthening gradient nanotwinned Cu
Tao Wan et al.
SCRIPTA MATERIALIA (2021)
Effects on the distortion of Inconel 718 components along a hybrid laser-based additive manufacturing process chain using laser powder bed fusion and laser metal deposition
Eckart Uhlmann et al.
PROGRESS IN ADDITIVE MANUFACTURING (2021)
Microstructure and properties of hybrid additive manufacturing 316L component by directed energy deposition and laser remelting
Xiao-hui Chen et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2020)
An investigation on the effect of deposition pattern on the microstructure, mechanical properties and residual stress of 316L produced by Directed Energy Deposition
Abdollah Saboori et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of cold rolling on aging precipitation behavior and mechanical properties of Cu-15Ni-8Sn alloy
Zhongkai Guo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Grain structure and texture of the SLM single track
Yafei Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
The effect of Co addition on the modulated structure coarsening and discontinuous precipitation growth kinetics of Cu-15Ni-8Sn alloy
Chengjun Guo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Mechanical properties and microstructure evolution of selective laser melting Inconel 718 along building direction and sectional dimension
Baicheng Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Cu-Ni-Sn alloy fabricated by melt spinning and selective laser melting: a comparative study on the microstructure and formation kinetics
Chao Zhao et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
A low Sn content Cu-Ni-Sn alloy with high strength and good ductility
Baomin Luo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of heat treatment on microstructure and mechanical properties of a selective laser melted Cu-15Ni-8Sn alloy
Gengming Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Repairing additive-manufactured 316L stainless steel using direct energy deposition
Wook Jin Oh et al.
OPTICS AND LASER TECHNOLOGY (2019)
Grain size evolution under different cooling rate in laser additive manufacturing of superalloy
Jiayun Shao et al.
OPTICS AND LASER TECHNOLOGY (2019)
Additively manufactured hierarchical stainless steels with high strength and ductility
Y. Morris Wang et al.
NATURE MATERIALS (2018)
Environmentally assisted degradation spinodal copper alloy C72900
Roy Johnsen et al.
CORROSION SCIENCE (2018)
Additive manufacturing of fine-structured copper alloy by selective laser melting of pre-alloyed Cu-15Ni-8Sn powder
Gengming Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect
Zhifeng Yan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
An effective method to obtain Cu-35Zn alloy with a good combination of strength and ductility through cryogenic rolling
Pengfei Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructure and tribological properties of plasma sprayed Cu-15Ni-8Sn coatings
Jin-Kun Xiao et al.
SURFACE & COATINGS TECHNOLOGY (2018)
The limit of application of the Scherrer equation
M. A. R. Miranda et al.
ACTA CRYSTALLOGRAPHICA A-FOUNDATION AND ADVANCES (2018)
Incorporating grain-level residual stresses and validating a crystal plasticity model of a two-phase Ti-6Al-4V alloy produced via additive manufacturing
Kartik Kapoor et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
Correlation between microstructures and mechanical properties of cryorolled CuNiSi alloys with Cr and Zr alloying
Wei Wang et al.
MATERIALS CHARACTERIZATION (2018)
Phase transformation behaviors and properties of a high strength Cu-Ni-Si alloy
Qian Lei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
A comparison on metallurgical behaviors of 316L stainless steel by selective laser melting and laser cladding deposition
Mingming Ma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Age-hardening behavior and microstructure of Cu-15Ni-8Sn-0.3Nb alloy prepared by powder metallurgy and hot extrusion
Yi Ouyang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)
An integrated method for net-shape manufacturing components combining 3D additive manufacturing and compressive forming processes
Jun Jiang et al.
INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017 (2017)
Effect of real-time cooling rate on microstructure in Laser Additive Manufacturing
Mohammad H. Farshidianfar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Microstructure and mechanical properties of LMD-SLM hybrid forming Ti6A14V alloy
Qi Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Combination of laser keyhole and conduction welding: Dissimilar laser welding of niobium and Ti-6Al-4V
M. J. Torkamany et al.
OPTICS AND LASERS IN ENGINEERING (2016)
Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing
Beth E. Carroll et al.
ACTA MATERIALIA (2015)
Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition
W. Xu et al.
ACTA MATERIALIA (2015)
Evolution of solidification texture during additive manufacturing
H. L. Wei et al.
SCIENTIFIC REPORTS (2015)
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
Kaka Ma et al.
ACTA MATERIALIA (2014)
Solidification Map of a Nickel-Base Alloy
J. J. Blecher et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L Stainless Steel
Mingming Ma et al.
OPTICS AND LASER TECHNOLOGY (2013)
Spinodal copper alloy C72900-new high strength antifriction alloy system
W. R. Cribb et al.
CANADIAN METALLURGICAL QUARTERLY (2011)
Microstructure and age characterization of Cu-15Ni-8Sn alloy coatings by laser cladding
Zhang Hui et al.
APPLIED SURFACE SCIENCE (2010)
Melt pool and keyhole behaviour analysis for deep penetration laser welding
R. Fabbro
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2010)
Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
Marion Calcagnotto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Individualized production by means of high power Selective Laser Melting
H. Schleifenbaum et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2010)
Residual stresses in selective laser sintering and selective laser melting
Peter Mercelis et al.
RAPID PROTOTYPING JOURNAL (2006)
Hall-Petch relation and boundary strengthening
N Hansen
SCRIPTA MATERIALIA (2004)
Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues
LP Kubin et al.
SCRIPTA MATERIALIA (2003)
Mechanism of keyhole formation and stability in stationary laser welding
JY Lee et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2002)
The influence of temperature and surface conditions on surface absorptivity in laser surface treatment
JT Wang et al.
JOURNAL OF APPLIED PHYSICS (2000)
Microstructure and properties of titanium boride dispersed Cu alloys fabricated by spray forming
J Lee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Share Paper
