☆ 4.7 Article

Polyaniline-decorated carbon fibers for enhanced mechanical and electromagnetic interference shielding performances of epoxy composites

MATERIALS & DESIGN (2022)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

High-Efficiency Electromagnetic Interference Shielding of rGO@FeNi/Epoxy Composites with Regular Honeycomb Structures

Ping Song et al.

Summary: With the rapid development of fifth-generation mobile communication technology and wearable electronic devices, the need for highly efficient EMI shielding materials has become crucial. In this study, a three-dimensional graphene oxide (GO) with regular honeycomb structure (GH) was constructed using sacrificial template and freeze-drying methods. Amino functionalized FeNi alloy particles (f-FeNi) were loaded onto the GH skeleton followed by in-situ reduction to prepare rGH@FeNi aerogel. The resulting rGH@FeNi/epoxy composites with a low rGH@FeNi mass fraction of 2.1 wt% exhibited a high EMI shielding effectiveness (EMI SE) of 46 dB, which is 5.8 times higher than that of rGO/FeNi/epoxy composites with the same mass fraction. The composites also displayed excellent thermal stability and mechanical properties.

NANO-MICRO LETTERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Study on the inter-laminar shear properties of carbon fiber reinforced epoxy composite materials with different interface structures

Junsen Ma et al.

Summary: The study reveals that enhancing the interfacial interaction between CF and EP can increase the inter-laminar shear strength of CFRPs, transitioning the interlayer shear failure from single interface debonding to a combination of interface debonding and matrix fragmentation.CF-COOH-MXene-EP with higher interfacial interaction can withstand more interlayer shear forces, contributing to improving the service life of CFRPs.

MATERIALS & DESIGN (2022)

Add to Collection

Article Mechanics

Improved electromagnetic wave shielding capability of carbonyl iron powder-embedded lightweight CFRP composites

Daeik Jang et al.

Summary: In this study, carbonyl iron powder (CIP)-embedded carbon fiber-reinforced polymer (CFRP) composites were fabricated as lightweight electromagnetic interference (EMI) shielding composites. The effects of different CIP contents on the electrical characteristics and EMI shielding capability of the composites were investigated, and microstructural images and observations were analyzed. The results showed that increasing the CIP content improved the EMI shielding capability, and the use of the composites in structures demonstrated potential for EMI shielding.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Engineering, Manufacturing

Magnetic graphene oxide/carbon fiber composites with improved interfacial properties and electromagnetic interference shielding performance

Baowei Qiu et al.

Summary: In this study, magnetic graphene oxide (MGO) was encapsulated on the surface of carbon fibers to improve the interfacial properties of carbon fiber reinforced composites (CFRPs). The results showed significant improvements in inter laminar shear strength, interfacial shear strength, and transverse fiber bundle tensile strength of the MGO treated CFRPs. Furthermore, the MGO treated CFRPs exhibited excellent electromagnetic interference (EMI) shielding effectiveness in the X-band.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Article Chemistry, Physical

Ultralight carbon nanotube/graphene/polyimide foam with heterogeneous interfaces for efficient electromagnetic interference shielding and electromagnetic wave absorption

Yue-Yi Wang et al.

Summary: A lightweight polyimide foam with excellent EMI shielding performance and good compression stability was successfully designed by achieving ideal CNT dispersion through the interaction between functionalized graphene and CNT, providing a new approach for the aerospace industry.

CARBON (2021)

Add to Collection

Article Materials Science, Composites

Predicting strength of a unidirectional composite containing interface crack

Run-Sheng Mao et al.

Summary: This paper applied analytical Bridging Model and numerical methods GMC and HFGMC to analyze failures of a unidirectional composite with a cracked interface. Predictions of off-axial tensile strengths were compared with experimental data, and it was found that the predictions based on the Bridging Model equations provided the best agreement with the experiments.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Composites

PAI/MXene sizing-based dual functional coating for carbon fiber/PEEK composite

Xueyu Yuan et al.

Summary: Thermoplastic resins play a significant role in fiber reinforced composites, and interface treatment can enhance the performance of composite materials. This research demonstrates the use of specific sizing to improve interface performance in composite materials.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Composites

Co-depositing bio-inspired tannic acid-aminopropyltriethoxysilane coating onto carbon fiber for excellent interfacial adhesion of epoxy composites

Mengjie Zhang et al.

Summary: By co-depositing TA and APTES on the surface of CF using a mild and eco-friendly method, the interfacial properties were improved, leading to enhanced mechanical properties of the composite materials.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Composites

Effect of multiscale reinforcement by fiber surface treatment with polyvinyl alcohol/graphene oxide/oxidized carbon nanotubes on the mechanical properties of reinforced hybrid fiber composites

Yuxin He et al.

Summary: Polyvinyl alcohol-graphene oxide-oxidized carbon nanotube hybrid coatings were used to modify glass fibers and carbon fibers, resulting in modified hybrid composites with different concentric structures. The hybrid structure optimized the mechanical properties of the composites by combining the advantages of the two types of fiber reinforcement, with interface strength playing a crucial role. Mechanical properties were significantly enhanced after modification, and interlaminar shear strength was improved with hybrid coating.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Composites

Synergy of electrochemical grafting and crosslinkable crystalline sizing agent to enhance the interfacial strength of carbon fiber/PEEK composites

Shengdao Wang et al.

Summary: This study successfully improved the weak interfacial strength between carbon fiber and PEEK matrix in carbon fiber/PEEK composites by introducing chemical bonds, resulting in increased interfacial shear strength and interlaminar shear strength.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Composites

Remarkably improved interfacial adhesion of pitch-based carbon fiber composites by constructing a synergistic hybrid network at interphase

Qing Wu et al.

Summary: The study introduces a novel strategy of incorporating a ternary organic material on fiber surface to increase the interfacial shear strength of pitch-based carbon fiber composites. By forming a solid connection and enhancing surface energy, a synergistic hybrid network is created, leading to a significant increase in interfacial shear strength. The findings provide unique insights for addressing the weak interface in pitch-based carbon fiber composites.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Grafting of a novel hyperbranched polymer onto carbon fiber for interfacial enhancement of carbon fiber reinforced epoxy composites

Lina Yang et al.

Summary: Grafting hyperbranched polymer onto the carbon fiber surface can significantly enhance the interfacial properties of carbon fiber/epoxy composites, improving the mechanical performance and thermal stability of the composites.

MATERIALS & DESIGN (2021)

Add to Collection

Article Chemistry, Physical

Synthesis of CF@PANI hybrid nanocomposites decorated with Fe3O4 nanoparticles towards excellent lightweight microwave absorber

Meng Zhang et al.

Summary: A lightweight hybrid nanocomposite with remarkable microwave absorption properties was successfully synthesized in this study, showing great potential for practical applications in the frequency range of 2-18 GHz.

CARBON (2021)

Add to Collection

Article Materials Science, Composites

Simultaneously improved mechanical and electromagnetic interference shielding properties of carbon fiber fabrics/epoxy composites via interface engineering

Shu Zhu et al.

Summary: By using electroless plating and dopamine self-polymerization, the electrical conductivity and strength of carbon fiber reinforced composites were successfully improved, enhancing the interactions between fibers and epoxy matrix. The introduction of dopamine altered the fracture mechanisms of the composites, leading to an enhancement in EMI shielding effectiveness.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Composites

The reinforcing role of 2D graphene analogue MoS2 nanosheets in multiscale carbon fibre composites: Improvement of interfacial adhesion

Mojtaba Ahmadi et al.

Summary: A novel scalable method was used to synthesize and functionalize molybdenum disulfide nanosheets with diaminodiphenyl sulfone, resulting in nanosheets highly compatible with epoxy resin. These functionalized nanosheets showed promising behavior in both epoxy nanocomposites and multiscale carbon fiber nanocomposites, leading to considerable improvements in mechanical properties.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Engineering, Manufacturing

Enhanced interfacial and mechanical properties of carbon fiber/PEEK composites by hydroxylated PEEK and carbon nanotubes

Hanxiong Lyu et al.

Summary: By modifying CF/PEEK composites with HPEEK-g-MWCNT, the interface adhesion and mechanical properties are significantly improved, suggesting great potential for application in thermoplastic composites.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Materials Science, Composites

Engineering doping level for enhanced thermoelectric performance of carbon nanotubes/polyaniline composites

Hui Li et al.

Summary: This study optimized the microstructure and improved the thermoelectric properties of CNTs/PANI composites by modulating the doping level of PANI, leading to enhanced Seebeck coefficient and power factor. The results demonstrate an effective strategy for improving the thermoelectric performance of CNTs/PANI composites through precise tuning of the doping level.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

TiO2/PANI/Graphene-PVA Hydrogel for Recyclable and Highly Efficient Photo-Electrocatalysts

Yulun Tao et al.

Summary: The TiO2/PANI/graphene-PVA hydrogel (TPGH) with excellent photoelectrical response and photocatalysis properties was successfully fabricated by combining TiO2 /PANI/graphene powder with poly(vinyl alcohol) (PVA) hydrogel. The hydrogel showed high efficiency in degrading organic dyes and contaminants, along with good recyclability and cycling performance, providing a promising alternative for the design and synthesis of recyclable hydrogel photocatalysts.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Polymer-based EMI shielding composites with 3D conductive networks: A mini-review

Lei Wang et al.

Summary: Polymer-based EMI shielding materials, with their lightweight, high specific strength, and stable properties, have become the mainstream for addressing electromagnetic interference (EMI) issues. The construction of 3D conductive networks has proven to be an effective method for preparing these materials with excellent shielding effectiveness. Future research will focus on solving key scientific and technical issues and exploring the development trends and application prospects of polymer-based EMI shielding materials.

SUSMAT (2021)

Add to Collection

Article Engineering, Environmental

Phthalocyanine nanowires@GO/carbon fiber composites with enhanced interfacial properties and electromagnetic interference shielding performance

Mei He et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Manufacturing

Carbon fiber-based polymer composite via ceramization toward excellent electromagnetic interference shielding performance and high temperature resistance

Ying-Ming Li et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Engineering, Multidisciplinary

Fluorine/adamantane modified cyanate resins with wonderful interfacial bonding strength with PBO fibers

Lin Tang et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Materials Science, Composites

Improved interfacial shear strength in polyphenylene sulfide/carbon fiber composites via the carboxylic polyphenylene sulfide sizing agent

Yuan Dong et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Strong and Flexible Carbon Fiber Fabric Reinforced Thermoplastic Polyurethane Composites for High-Performance EMI Shielding Applications

Ningmin Duan et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Stretchable Liquid Metal-Based Conductive Textile for Electromagnetic Interference Shielding

Li-Chuan Jia et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Exceptional electromagnetic shielding efficiency of silver coated carbon fiber fabrics via a roll-to-roll spray coating process

Janghoon Park et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Electrical conductivity of anisotropic PMMA composite filaments with aligned carbon fibers - predicting the influence of measurement direction

Muchao Qu et al.

RSC ADVANCES (2020)

Add to Collection

Article Engineering, Environmental

Macroporous epoxy-carbon fiber structures with a sacrificial 3D printed polymeric mesh suppresses electromagnetic radiation

Saswat Mishra et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Engineering, Manufacturing

Hybrid polyurethane and silane sized carbon fibre/epoxy composites with enhanced impact resistance

Lihe Mao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Article Chemistry, Physical

Ultrathin multifunctional carbon/glass fiber reinforced lossy lattice metastructure for integrated design of broadband microwave absorption and effective load bearing

Yixing Huang et al.

CARBON (2019)

Add to Collection

Article Chemistry, Physical

Stretchable and durable conductive fabric for ultrahigh performance electromagnetic interference shielding

Li-Chuan Jia et al.

CARBON (2019)

Add to Collection

Article Engineering, Environmental

High-performance textile electrodes for wearable electronics obtained by an improved in situ polymerization method

Jingchun Lv et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Engineering, Multidisciplinary

A study on the microstructural changes and mechanical behaviors of carbon fibers induced by optimized electrochemical etching

Kwan-Woo Kim et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

A two-step carbon fiber surface treatment and its effect on the interfacial properties of CF/EP composites: The electrochemical oxidation followed by grafting of silane coupling agent

Zhangping Wen et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Engineering, Multidisciplinary

Synergistic effect of hydrogen bonding and π-π stacking in interface of CF/PEEK composites

Elwathig A. M. Hassan et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Materials Science, Composites

Interfacially reinforced carbon fiber silicone resin via constructing functional nano-structural silver

Ying Li et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Review Engineering, Manufacturing

Study on the performance of different nano-species used for surface modification of carbon fiber for interface strengthening

Ajitanshu Vedrtnam et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Article Engineering, Manufacturing

Enhancing CF/PEEK composites by CF decoration with polyimide and loosely-packed CNT arrays

Elwathig A. M. Hassan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Review Chemistry, Applied

The chemical modification of polyaniline with enhanced properties: A review

Guangfu Liao et al.

PROGRESS IN ORGANIC COATINGS (2019)

Add to Collection

Article Engineering, Environmental

An efficient high-throughput grafting procedure for enhancing carbon fiber-to-matrix interactions in composites

Daniel J. Eyckens et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Chemistry, Multidisciplinary

In situ time-resolved Raman spectroelectrochemical study of aniline polymerization at platinum and gold electrodes

Regina Mažeikienė et al.

Chemija (2018)

Add to Collection

Article Engineering, Manufacturing

Synergistic effects of spray-coated hybrid carbon nanoparticles for enhanced electrical and thermal surface conductivity of CFRP laminates

Yan Li et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Add to Collection

Article Construction & Building Technology

Study on cohesion performance of waterborne epoxy resin emulsified asphalt as interlayer materials

Mengmei Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Light-weight epoxy/nickel coated carbon fibers conductive foams for electromagnetic interference shielding

Jianming Yang et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2017)

Add to Collection

Article Chemistry, Physical

Polydopamine decoration on 3D graphene foam and its electromagnetic interference shielding properties

Liying Zhang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2017)

Add to Collection

Article Materials Science, Multidisciplinary

An ultra-thin multilayer carbon fiber reinforced composite for absorption-dominated EMI shielding application

Di Xing et al.

MATERIALS LETTERS (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Processing-structure-property relationships of continuous carbon fiber polymer-matrix composites

D. D. L. Chung

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2017)

Add to Collection

Article Polymer Science

Atomistic Molecular Dynamics Simulations of the Initial Crystallization Stage in an SWCNT-Polyetherimide Nanocomposite

Victor M. Nazarychev et al.

POLYMERS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced electromagnetic interference shielding properties of carbon fiber veil/Fe3O4 nanoparticles/epoxy multiscale composites

Wei Chen et al.

MATERIALS RESEARCH EXPRESS (2017)

Add to Collection

Article Chemistry, Physical

Carbon nanofiber mats for electromagnetic interference shielding

Xinghua Hong et al.

CARBON (2017)

Add to Collection

Article Chemistry, Physical

Improvement of the electromagnetic shielding properties of C/SiC composites by electrophoretic deposition of carbon nanotube on carbon fibers

Hui Mei et al.

CARBON (2016)

Add to Collection

Article Engineering, Manufacturing

Reduced graphene oxide deposited carbon fiber reinforced polymer composites for electromagnetic interference shielding

Juan Chen et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Controlled growth of silver nanoparticles on carbon fibers for reinforcement of both tensile and interfacial strength

Caifeng Wang et al.

RSC ADVANCES (2016)

Add to Collection

Article Chemistry, Physical

Mechanical and electromagnetic shielding properties of carbon fiber reinforced silicon carbide matrix composites

Lingqi Chen et al.

CARBON (2015)

Add to Collection

Article Chemistry, Physical

Structural Evolution from Metal-Organic Framework to Hybrids of Nitrogen-Doped Porous Carbon and Carbon Nanotubes for Enhanced Oxygen Reduction Activity

Linjie Zhang et al.

CHEMISTRY OF MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

The reduction of graphene oxide

Songfeng Pei et al.

CARBON (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.