4.7 Article

Superhydrophobic composite coating for reliable corrosion protection of Mg alloy

Related references

Note: Only part of the references are listed.
Article Metallurgy & Metallurgical Engineering

Properties of polydimethylsiloxane hydrophobic modified duplex microarc oxidation/diamond-like carbon coatings on AZ31B Mg alloy

Xue-Jun Cui et al.

Summary: By modifying a MAO/DLC coating with PDMS, the hardness of the coating decreased, improving its lubrication and corrosion resistance properties. The PDMS modification also resulted in a denser, hydrophobic coating with higher bond strength and better resistance to friction.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Article Metallurgy & Metallurgical Engineering

Surface modification of biomedical Mg-Ca and Mg-Zn-Ca alloys using selective laser melting: Corrosion behaviour, microhardness and biocompatibility

Xiyu Yao et al.

Summary: Utilizing selective laser melting (SLM) for surface modification of magnesium alloys can simultaneously improve corrosion behavior and microhardness, reducing corrosion rate and increasing microhardness while maintaining good biocompatibility. This approach demonstrates the potential of SLM for developing advanced biomedical magnesium alloys.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Review Metallurgy & Metallurgical Engineering

Towards developing Mg alloys with simultaneously improved strength and corrosion resistance via RE alloying

Jinshu Xie et al.

Summary: Magnesium alloys have great application potential, but improvements in both strength and corrosion resistance are still needed. The addition of rare earth elements can enhance the performance of magnesium alloys, but further research is necessary to improve both strength and anti-corrosion properties.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Review Chemistry, Physical

Advances in LDH coatings on Mg alloys for biomedical applications: A corrosion perspective

Jesslyn K. E. Tan et al.

Summary: This review discusses the potential of layered double hydroxide (LDH) films as protective coatings for magnesium (Mg) alloys in implant applications. LDH films are considered to delay corrosion of Mg alloys due to their tunable crystal structure and corrosion inhibiting properties. The biodegradability and biocompatibility of LDH films make them a promising coating for next generation implant applications.

APPLIED CLAY SCIENCE (2021)

Article Chemistry, Physical

Self-dispersing complex lithium-based thickener fiber for high-performance anti-corrosion/wear epoxy coating filler

Han Yan et al.

Summary: The development of self-dispersing complex lithium-based thickener (CLT) fiber is significant for optimizing the protective performance of waterborne epoxy coatings. The CLT fiber can maintain good dispersion in epoxy resin slurry, forming a continuous interface in CLT hybrid epoxy coating, resulting in improved anti-corrosion and wear properties. Incorporating 1 wt% CLT fiber in epoxy coating shows the best protection performance, reducing water absorption by 78.3% and increasing coating resistance by an order of magnitude.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Multilayer structural epoxy composite coating towards long-term corrosion/wear protection

Shijie Song et al.

Summary: The multifunctional epoxy composite coating with multilayer structure, constructed by layer-by-layer assembly method, shows improved impedance value, long-term chlorine resistance, reduced wear rate, and enhanced UV aging resistance.

CARBON (2021)

Article Materials Science, Multidisciplinary

2-Mercaptobenzimidazole-inbuilt metal-organic-frameworks modified graphene oxide towards intelligent and excellent anti-corrosion coating

Hao Li et al.

Summary: In this study, 2-Mercaptobenzimidazole was successfully incorporated into a composite coating with pH-responsive and self-healing properties. The release of corrosion inhibitors and increased crosslinking density improved the anti-corrosion performance of the coating.

CORROSION SCIENCE (2021)

Article Materials Science, Multidisciplinary

Improvement of corrosion resistance of H59 brass through fabricating superhydrophobic surface using laser ablation and heating treatment

Xinyi Li et al.

Summary: The superhydrophobic brass surface fabricated by laser ablation and heating treatment shows better corrosion resistance than polished brass surface due to the synergistic effect of micro/nano hierarchical structure and the adsorption of organic compounds from ambient air.

CORROSION SCIENCE (2021)

Article Engineering, Environmental

Ti3C2Tx/PANI composites with tunable conductivity towards anticorrosion application

Meng Cai et al.

Summary: Introducing MXene nanoflakes into organic coatings is critical for enhancing mechanical properties and corrosion protection. By synthesizing 3D Ti3C2Tx/polyaniline composites with tunable conductivity, excellent corrosion protection can be achieved. The potential applications of TPCs in water splitting, desalination, and electronic devices show promising prospects for future development.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Materials Science, Multidisciplinary

Control of the Mg alloy biodegradation via PEO and polymer-containing coatings

A. S. Gnedenkov et al.

Summary: The composite calcium-phosphate coating on MA8 Mg alloy, modified with superdispersed polytetrafluoroethylene using electrophoretic deposition, decreases electrochemical activity of the sample in minimum essential medium and ensures the material biocompatibility.

CORROSION SCIENCE (2021)

Article Materials Science, Multidisciplinary

Chemical, electrochemical, quantum, and surface analysis evaluation on the inhibition performance of novel imidazo[4,5-b] pyridine derivatives against mild steel corrosion

A. Saady et al.

Summary: The study evaluated the inhibitory performance of imidazo[4,5-b] pyridine derivatives against mild steel corrosion in 1 M HCl, achieving a high inhibition performance of 90% for SB14a and 88% for SB9a at 0.1 mM. Experimental results were supported by Density functional theory (DFT) and molecular dynamic simulation (MD).

CORROSION SCIENCE (2021)

Article Materials Science, Coatings & Films

Microstructure and improved anti-corrosion properties of cold-sprayed Zn coatings fabricated by post shot-peening process

Hai-Long Yao et al.

Summary: In this study, a Zn coating was formed on Mg alloy through cold spraying technology and then subjected to post shot-peening processing to improve corrosion resistance. The shot-peened Zn coatings showed densification, increased hardness, and significantly enhanced anti-corrosion properties compared to cold-sprayed Zn coatings.

SURFACE & COATINGS TECHNOLOGY (2021)

Review Chemistry, Multidisciplinary

Superhydrophobic, superamphiphobic and SLIPS materials as anti-corrosion and anti-biofouling barriers

Binbin Zhang et al.

Summary: This study provides an overview of three types of interfacial materials with special wettability for anti-corrosion and anti-biofouling applications, namely superhydrophobic, superamphiphobic, and SLIPS. It also identifies the bottlenecks and future research priorities in order to accelerate comprehensive understanding and development in the field.

NEW JOURNAL OF CHEMISTRY (2021)

Article Chemistry, Physical

Design and in situ prepare a novel composite coating on Mg alloy for active anti-corrosion protection

Junfeng Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Engineering, Chemical

Roll-to roll initiated chemical vapor deposition of super hydrophobic thin films on large-scale flexible substrates

Huseyin Sakalak et al.

CHEMICAL ENGINEERING SCIENCE (2020)

Article Nanoscience & Nanotechnology

Superhydrophobic ZIF-8-Based Dual-Layer Coating for Enhanced Corrosion Protection of Mg Alloy

Xingxing Yin et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Materials Science, Multidisciplinary

Localized currents and pH distribution studied during corrosion of MA8 Mg alloy in the cell culture medium

A. S. Gnedenkov et al.

CORROSION SCIENCE (2020)

Article Materials Science, Coatings & Films

Enhancing structural integrity, corrosion resistance and wear properties of Mg alloy by heat treated cold sprayed Al coating

Sumera Siddique et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Article Chemistry, Physical

Superhydrophobic coating of silicone/β-MnO2 nanorod composite for marine antifouling

Mohamed S. Selim et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2019)

Article Metallurgy & Metallurgical Engineering

Fabrication of corrosion-resistant superhydrophobic coating on magnesium alloy by one-step electrodeposition method

Tianxu Zheng et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2019)

Review Engineering, Chemical

A Review on Superhydrophobic Polymer Nanocoatings: Recent Development and Applications

Sonalee Das et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

Review Materials Science, Coatings & Films

Application of superhydrophobic coatings as a corrosion barrier: A review

E. Vazirinasab et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Article Chemistry, Applied

Effect of R-TiO2 and ZnO nanoparticles on the UV-shielding efficiency of water-borne acrylic coating

Thien Vuong Nguyen et al.

PROGRESS IN ORGANIC COATINGS (2017)

Article Nanoscience & Nanotechnology

Nanocontainer-Enhanced Self-Healing for Corrosion-Resistant Ni Coating on Mg Alloy

Zhi-Hui Xie et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Nanoscience & Nanotechnology

Robust Slippery Coating with Superior Corrosion Resistance and Anti-Icing Performance for AZ31B Mg Alloy Protection

Jialei Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Multidisciplinary

Corrosion-Resistant Superhydrophobic Coatings on Mg Alloy Surfaces Inspired by Lotus Seedpod

Dongmian Zang et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Article Materials Science, Coatings & Films

Preparation and characterization of HA sol-gel coating on MAO coated AZ31 alloy

Bo Niu et al.

SURFACE & COATINGS TECHNOLOGY (2016)

Article Materials Science, Multidisciplinary

Superhydrophobic coatings for aluminium surfaces synthesized by chemical etching process

Priya Varshney et al.

INTERNATIONAL JOURNAL OF SMART AND NANO MATERIALS (2016)

Article Chemistry, Multidisciplinary

Biomimetic transparent and superhydrophobic coatings: from nature and beyond nature

Shen Yu et al.

CHEMICAL COMMUNICATIONS (2015)

Article Materials Science, Multidisciplinary

Fabrication and corrosion resistance of a hydrophobic micro-arc oxidation coating on AZ31 Mg alloy

Xue-jun Cui et al.

CORROSION SCIENCE (2015)

Article Materials Science, Multidisciplinary

Corrosion and mechanical performance of double-layered nano-Al/PCL coating on Mg-Ca-Bi alloy

H. R. Bakhsheshi-Rad et al.

VACUUM (2015)

Article Chemistry, Physical

Fabrication of microcavity-array superhydrophobic surfaces using. an improved template method

PanPan Peng et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2013)

Article Materials Science, Multidisciplinary

Experimental study of corrosion protection of a three-layer film on AZ31B Mg alloy

Xinghua Guo et al.

CORROSION SCIENCE (2012)

Article Chemistry, Physical

Study of PDMS conformation in PDMS-based hybrid materials prepared by gamma irradiation

J. J. H. Lancastre et al.

RADIATION PHYSICS AND CHEMISTRY (2012)

Review Chemistry, Physical

A review on self-cleaning coatings

V. Anand Ganesh et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)

Article Materials Science, Multidisciplinary

Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation

Zhiming Shi et al.

CORROSION SCIENCE (2010)

Article Chemistry, Physical

Corrosion behaviour of Mg-alloy AZ91E with atypical alloying additions

A. D. Sudholz et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Article Chemistry, Multidisciplinary

Anti-Icing Superhydrophobic Coatings

Liangliang Cao et al.

LANGMUIR (2009)

Review Chemistry, Physical

Superhydrophobic surfaces

Minglin Ma et al.

CURRENT OPINION IN COLLOID & INTERFACE SCIENCE (2006)

Review Chemistry, Physical

Protective coatings on magnesium and its alloys - a critical review

JE Gray et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2002)