Related references
Note: Only part of the references are listed.Linear and Nonlinear Viscoelasticity of Polypropylene Containing Cross-Linked Gels
Chia-Ying Tsai et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2022)
Improvements in electric vehicle battery technology influence vehicle lightweighting and material substitution decisions
Joshua Thomas Jameson Burd et al.
APPLIED ENERGY (2021)
Effect on the Impact Properties of Adding Long-Chain Branched Polypropylene in Polypropylene-Polyolefin Elastomer Cellular Polymers Produced by Core-Back Injection Molding
Santiago Munoz-Pascual et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2021)
Design and multi-objective optimization of the bumper beams prepared in long glass fiber-reinforced polypropylene
Ying Xue et al.
POLYMER COMPOSITES (2021)
Polypropylene/talc foams with high weight-reduction and improved surface quality fabricated by mold-opening microcellular injection molding
Junji Hou et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
A comparative study on nanoinclusion effect of MoS2 nanosheets and MoS2 quantum dots on fracture toughness and interfacial properties of epoxy composites
Shahina Riaz et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Improved Cell Morphology and Surface Roughness in High-Temperature Foam Injection Molding Using a Long-Chain Branched Polypropylene
Steven Mendoza-Cedeno et al.
POLYMERS (2021)
Lightweight and strong glass fiber reinforced polypropylene composite foams achieved by mold-opening microcellular injection molding
Chunxia Yang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Injection Molded Strong Polypropylene Composite Foam Reinforced with Rubber and Talc
Jinchuan Zhao et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2020)
Effective Reinforcement of Melamine-functionalized WS2Nanosheets in Epoxy Nanocomposites at Low LoadingviaEnhanced Interfacial Interaction
Shahina Riaz et al.
MACROMOLECULAR RESEARCH (2020)
A green strategy to regulate cellular structure and crystallization of poly (lactic acid) foams based on pre-isothermal cold crystallization and CO2 foaming
Bo Li et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
Preparation of starch-graft-poly(methyl methacrylate) via SET-LRP at molecular level and its self-assembly
Xiaolin Wang et al.
POLYMER (2019)
Design and fabrication of expandable cavity injection mold for open cell microcellular foam
S. J. A. Rizvi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Effects of process parameters on core-back foam injection molding process
H. Wu et al.
EXPRESS POLYMER LETTERS (2019)
Effect of mold opening on the properties of PLA samples obtained by foam injection molding
Valentina Volpe et al.
POLYMER ENGINEERING AND SCIENCE (2018)
Microcellular PP/GF composites: Morphological, mechanical and fracture characterization
J. Gomez-Monterde et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Lightweight, super-elastic, and thermal-sound insulation bio-based PEBA foams fabricated by high-pressure foam injection molding with mold-opening
Guilong Wang et al.
EUROPEAN POLYMER JOURNAL (2018)
Development of high thermal insulation and compressive strength BPP foams using mold-opening foam injection molding with in-situ fibrillated PTFE fibers
Jinchuan Zhao et al.
EUROPEAN POLYMER JOURNAL (2018)
Injection-molded microcellular PLA/graphite nanocomposites with dramatically enhanced mechanical and electrical properties for ultra-efficient EMI shielding applications
Guilong Wang et al.
JOURNAL OF MATERIALS CHEMISTRY C (2018)
A new core-back foam injection molding method with chemical blowing agents
Hao Wu et al.
MATERIALS & DESIGN (2018)
Polystyrene Foam with High Cell Density and Small Cell Size by Compression-Injection Molding and Core Back Foaming Technique: Evolution of Cells in Cavity
Tiantian Bai et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2018)
Lightweight, thermally insulating, and low dielectric microcellular high-impact polystyrene (HIPS) foams fabricated by high-pressure foam injection molding with mold opening
Guilong Wang et al.
JOURNAL OF MATERIALS CHEMISTRY C (2018)
Application of a novel organic nucleating agent: Cucurbit[6]uril to improve polypropylene injection foaming behavior and their physical properties
Yuhui Zhou et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Modelling of thermal transport through a nanocellular polymer foam: toward the generation of a new superinsulating material
Guilong Wang et al.
NANOSCALE (2017)
High thermal insulation and compressive strength polypropylene foams fabricated by high-pressure foam injection molding and mold opening of nano-fibrillar composites
Jinchuan Zhao et al.
MATERIALS & DESIGN (2017)
Effects of hydrophobic-modified cellulose nanofibers (CNFs) on cell morphology and mechanical properties of high void fraction polypropylene nanocomposite foams
Long Wang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Study of the foaming mechanisms associated with gas counter pressure and mold opening using the pressure profiles
John W. S. Lee et al.
CHEMICAL ENGINEERING SCIENCE (2017)
Effect of functionalization on non-isothermal crystallization behavior of polypropylene
Xu-Feng Xia et al.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2016)
Impact of powertrain electrification, vehicle size reduction and lightweight materials substitution on energy use, CO2 emissions and cost of a passenger light-duty vehicle fleet
Juan C. Gonzalez Palencia et al.
ENERGY (2015)
Microcellular to nanocellular polymer foams: Progress (2004-2015) and future directions - A review
Chimezie Okolieocha et al.
EUROPEAN POLYMER JOURNAL (2015)
Characterization of short glass fiber reinforced polypropylene foam composites with the effect of compatibilizers: A comparison
Jinian Yang et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
General aspects of foam injection molding using local precision mold opening technology
Hans-Peter Heim et al.
POLYMER (2015)
Past and present developments in polymer bead foams and bead foaming technology
Daniel Raps et al.
POLYMER (2015)
Development of a rapid thermal cycling molding with electric heating and water impingement cooling for injection molding applications
Cheng-Long Xiao et al.
APPLIED THERMAL ENGINEERING (2014)
Thermal conductivity of polypropylene filled with inorganic particles
D. S. Muratov et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Assessing the life cycle costs and environmental performance of lightweight materials in automobile applications
Robert A. Witik et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Nanoscale Cellular Foams from a Poly(propylene)-Rubber Blend
Tomoyuki Nemoto et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2008)
Microcellular foamed wood-plastic composites by different processes: a review
Omar Faruk et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2007)
Reactively modified poly(lactic acid): Properties and foam processing
YW Di et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2005)
Thermal conductivity, thermal diffusivity, and specific heat capacity of particle filled polypropylene
B Weidenfeller et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Control of biodegradability of polylactide via nanocomposite technology
SS Ray et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2003)
Foam processing and cellular structure of polypropylene/clay nanocomposites
PH Nam et al.
POLYMER ENGINEERING AND SCIENCE (2002)
On the elastic modulus of hybrid particle/short-fiber/polymer composites
SY Fu et al.
COMPOSITES PART B-ENGINEERING (2002)
Bicontinuous nanoporous polymers by carbon dioxide foaming
B Krause et al.
MACROMOLECULES (2001)