4.4 Article

Extraction and phase transformation of iron in fine-grained complex hematite ore by suspension magnetizing roasting and magnetic separation

Related references

Note: Only part of the references are listed.
Article Engineering, Chemical

High-efficiency extraction of iron from early iron tailings via the suspension roasting-magnetic separation

Yanjun Li et al.

Summary: The high-efficiency extraction of iron from early iron tailings via the SRMS technology improved the porosity of the products and facilitated their grinding and separation. The recommended roasting conditions were temperature 600 degrees C, time 20 minutes, CO concentration 30%, and grinding fineness 55.32% passing 0.038 mm, with Fe grade in the concentrate at 67.09% and Fe recovery at 85.93%.

POWDER TECHNOLOGY (2021)

Article Engineering, Chemical

Pre-weakening behavior of magnetite quartzite based on high-voltage pulse discharge

Yonghong Qin et al.

Summary: The research found that HVPD pre-treatment can improve the mass fraction in ground products and enhance it with increasing pulse number. Laser particle size analysis showed uniform distribution of HVPD pre-treatment products, while BET analysis indicated effective improvement in specific surface area and pore volume of crushed products.

MINERALS ENGINEERING (2021)

Article Engineering, Environmental

Efficient iron recovery from iron tailings using advanced suspension reduction technology: A study of reaction kinetics, phase transformation, and structure evolution

Shuai Yuan et al.

Summary: This study investigated the reduction kinetics, phase transformation, and structure evolution of iron tailings to explain the mechanism behind magnetite production using suspension roasting-magnetic separation technology. The results showed that high temperatures during the suspension reduction process improved the reduction rate of iron tailings, with the P1 model being the best kinetics model for this reduction reaction. The gradual formation of magnetite from hematite through SRMS technology was observed, shedding light on efficient and clean recycling of iron tailings.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Chemical

Recycling iron from oolitic hematite via microwave fluidization roasting and magnetic separation

Wentao Zhou et al.

Summary: In this study, a clean and innovative microwave fluidization roasting method was developed to recover iron resources from oolitic hematite. The microwave pretreatment promoted the formation of microcracks at mineral interfaces, accelerating the reaction and phase transformation during magnetization roasting. The iron mineral phase was selectively transformed into strongly magnetic magnetite, and the iron mineral was effectively recycled from the roasted samples through magnetic separation.

MINERALS ENGINEERING (2021)

Article Engineering, Chemical

Recovery of iron from hazardous tailings using fluidized roasting coupling technology

Zhidong Tang et al.

POWDER TECHNOLOGY (2020)

Article Metallurgy & Metallurgical Engineering

Recovery of Zn, Pb, Fe and Si from a low-grade mining ore by sulfidation roasting-beneficiation-leaching processes

Zhuo-yue Lan et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2020)

Article Materials Science, Multidisciplinary

Characterization and concentration by selective flocculation/magnetic separation of iron ore slimes from a dam of Quadrilatero Ferrifero - Brazil

Rosa Malena Fernandes Lima et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Green & Sustainable Science & Technology

Iron recovery from refractory limonite ore using suspension magnetization roasting: A pilot-scale study

Yongsheng Sun et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Mining & Mineral Processing

Effect of the distributor plugging ways on fluidization quality and particle stratification in air dense medium fluidized bed

Zhonglin Gao et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2020)

Article Mining & Mineral Processing

A resilience-based approach in managing the closure and abandonment of large mine tailing ponds

Dragan Komljenovic et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2020)

Article Engineering, Chemical

Improving recovery of iron using column flotation of iron ore slimes

Elves Matiolo et al.

MINERALS ENGINEERING (2020)

Article Metallurgy & Metallurgical Engineering

Characterisation of low-grade Barsua iron ore fines and identification of possible beneficiation strategies

Satyananda Patra et al.

CANADIAN METALLURGICAL QUARTERLY (2019)

Article Engineering, Chemical

Kinetics on roasting reduction of limonitic laterite ore using coconut charcoal and anthracite reductants

Himawan Tri Bayu Murti Petrus et al.

MINERALS ENGINEERING (2019)

Article Engineering, Chemical

A pressure drop model of U-typed reduction chamber for iron ore suspension roasting

Peng Gao et al.

POWDER TECHNOLOGY (2019)

Article Energy & Fuels

Intensification of waste gangue removal from 6-1 mm fine-sized iron ores based on density-based dry vibrated separation and upgrading

Jingfeng He et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2019)

Article Engineering, Chemical

Recovery of rare earth elements minerals from iron oxide-silicate rich tailings - Part 2: Froth flotation separation

George Blankson Abaka-Wood et al.

MINERALS ENGINEERING (2019)

Review Metallurgy & Metallurgical Engineering

FLUIDIZED BED ROASTING TECHNOLOGY IN IRON ORES DRESSING IN CHINA - A REVIEW ON EQUIPMENT DEVELOPMENT AND APPLICATION PROSPECT

Z-D Tang et al.

JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY (2019)

Article Engineering, Chemical

Synthesis of magnetite powder from the mixture consisting of siderite and hematite iron ores

V. P. Ponomar et al.

MINERALS ENGINEERING (2018)

Article Materials Science, Multidisciplinary

Extraction of metals from complex sulfide nickel concentrates by low-temperature chlorination roasting and water leaching

Cong Xu et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2017)

Article Chemistry, Multidisciplinary

Optimal Recovery of Iron Values from a Low Grade Iron Ore using Reduction Roasting and Magnetic Separation

S. S. Rath et al.

SEPARATION SCIENCE AND TECHNOLOGY (2014)

Article Engineering, Chemical

Utilisation of ultrasonic treatment for upgrading of hematitic/goethitic iron ore fines

E. Donskoi et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2012)