☆ 4.6 Article

Enhanced design of the quasi-zero stiffness vibration isolator with three pairs of oblique springs: Theory and experiment

JOURNAL OF VIBRATION AND CONTROL (2023)

Related references

Note: Only part of the references are listed.

Article Mechanics

Dynamic characteristics of two degree-of-freedom quasi-zero stiffness vibration isolation system with nonlinear springs

Yanqi Liu et al.

Summary: This study presents a two degree-of-freedom quasi-zero stiffness (QZS) vibration isolator based on the anti-resonance characteristics of a multi-degree-of-freedom system. Nonlinear inclined springs (NIS) are used to achieve the nonlinear stiffness, with both linear and cubic stiffness terms. The effects of various mechanical and structural parameters on the stiffness characteristics are analyzed, and the dynamic response and force transmissibility are numerically discussed. The results show that the system can achieve smaller stiffness and wider low-stiffness range near equilibrium position by using smaller structural parameters and nonlinear inclined springs with softening stiffness.

MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2023)

Add to Collection

Article Engineering, Mechanical

On the detailed design of a quasi-zero stiffness device to assist in the realisation of a translational Lanchester damper

G. Gatti et al.

Summary: A translational Lanchester damper adds damping to a structure using a combination of viscous damper and mass, but achieving low stiffness for the device is crucial to behave like a Lanchester damper rather than a dynamic vibration absorber. By utilizing a specific geometry with linear springs and rigid links, the device is able to maintain linear-like behavior despite its inherent nonlinearity. The study on how geometry affects the nonlinear behavior provides general guidelines for design, and a prototype incorporating the low stiffness element has been successfully tested on vibrating structures.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Acoustics

Design and experimental validation of a vibration isolator with high-static low-dynamic stiffness and operating point variable property

Zhenhua Zhou et al.

Summary: This article proposes a vibration isolator design with variable operation points, achieving high-static low-dynamic stiffness characteristic by combining coil spring, flexible leaf springs, and negative stiffness magnet spring. The effects of configuration parameters on negative stiffness are investigated, and a designing procedure for realizing linear negative stiffness with expected magnitude and range is developed. Experimental results validate the effectiveness of both the designing procedure and the variability of operation point in the isolator.

JOURNAL OF VIBRATION AND CONTROL (2022)

Add to Collection

Article Engineering, Mechanical

A quasi-zero-stiffness vibration isolator using a cam mechanism with user-defined profile

Ming Li et al.

Summary: This paper introduces a passive quasi-zero-stiffness vibration isolator using a cam mechanism, which can generate ideal simplest restoring force directly and eliminate approximation errors. Experimental results confirm the proposed design principle and show the advantages of the QZS isolator in vibration tests, with wider isolation frequency bandwidth and weaker resonance effect compared to linear counterparts. The specific isolation efficiency and the effect of excitation amplitudes on vibration attenuation performance are comprehensively compared.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Review Engineering, Mechanical

Applications of Nonlinearity in Passive Vibration Control: A Review

P. S. Balaji et al.

Summary: This review discusses the application of nonlinearity in passive vibration control devices, showing how nonlinearity is applied and beneficial in the systems. Nonlinearity has also been successfully applied in energy harvesting devices, nonlinear energy sinks, and metamaterials for vibration isolation and energy harvesting purposes. The implementation of nonlinearity in engineering systems has shown significant benefits over linear systems.

JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES (2021)

Add to Collection

Article Acoustics

Harnessing the compressed-spring mechanism for a six-degrees-of-freedom quasi-zero-stiffness vibration isolation platform

Yisheng Zheng et al.

Summary: In this study, a six-degrees-of-freedom quasi-zero-stiffness isolation platform constructed using compressed-spring structures is proposed. Static and dynamic analysis show that the presence of static load results in linear cross-coupling effects, affecting the isolation performance of the platform in coupling directions.

JOURNAL OF VIBRATION AND CONTROL (2021)

Add to Collection

Article Engineering, Mechanical

Weakening-induced Snap Instability as a Novel Reusable Force Protection Mechanism

Seoyoung Heo et al.

Summary: This study introduces a novel reusable force protection mechanism with snap instability induced by weakening boundary conditions. The structure allows for switching between fixed and pinned supports, resulting in asymmetric equilibrium paths with hysteresis in the load-displacement curve. Through a combination of experiments, simulations, and analysis, the unique structural behavior is explored, showing potential for practical applications across various length scales.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Review Engineering, Mechanical

Vibration control based metamaterials and origami structures: A state-of-the-art review

J. C. Ji et al.

Summary: Vibration and sound control are crucial for practical engineering systems, and metamaterials and origami-based structures offer promising applications due to their unique physical properties. Metamaterials exhibit extremal properties not found in conventional materials, with recent advances in auxetic, band gap, and pentamode metamaterials for vibration and sound mitigations. Origami, as an ancient Japanese art, has become a new design paradigm with its multi-stable states and desirable stiffness characteristics for vibration control.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Engineering, Mechanical

An innovative quasi-zero stiffness isolator with three pairs of oblique springs

Feng Zhao et al.

Summary: This paper introduces an innovative design of quasi-zero stiffness isolator with three pairs of oblique springs, optimizing for lower transmissibility and wider QZS region. The design is validated through static and dynamic analyses, showing improved performance compared to traditional isolators.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Mathematics, Applied

Enhanced vibration isolation performance of quasi-zero-stiffness isolator by introducing tunable nonlinear inerter

Chaoran Liu et al.

Summary: This paper focuses on enhancing the QZS isolator by introducing tunable nonlinear inerter (TNI) to improve low-frequency isolation performance. Analytical calculations, stability analysis, and numerical simulations were conducted to compare the isolation performances of the QZS isolator and the QZS-TNI isolator. Results show that adding the inerter considerably suppresses the bending trend of the transmissibility curve, leading to a wider frequency range of isolation and a lower peak transmissibility.

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2021)

Add to Collection

Article Engineering, Mechanical

Design and test of an adjustable quasi-zero stiffness device and its use to suspend masses on a multi-modal structure

A. D. Shaw et al.

Summary: This paper describes a device capable of exhibiting quasi-zero stiffness, with independent adjustment mechanisms for stiffness and symmetry, allowing for extremely low stiffness adjustment. Experimental testing shows that the device locks-up due to friction at low frequencies, but acts as an efficient linear isolator at high frequencies.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Engineering, Multidisciplinary

In-plane quasi-zero-stiffness vibration isolator using magnetic interaction and cables: Theoretical and experimental study

Chaoran Liu et al.

Summary: This paper introduces an in-plane QZS isolator to isolate vibrations in arbitrary directions in the horizontal plane, achieved by combining magnetic rings with cables to provide negative and positive stiffness for quasi-zero-stiffness characteristic. Superior vibration isolation performance in both specified directions is demonstrated theoretically and experimentally.

APPLIED MATHEMATICAL MODELLING (2021)

Add to Collection

Article Mathematics, Applied

Analytical study of a pneumatic vibration isolation platform featuring adjustable stiffness

N. Y. P. Vo et al.

Summary: This paper proposed a pneumatic vibration isolation platform VIP with adjustable stiffness characteristics for low frequency vibration isolation systems. By introducing load bearing mechanism and stiffness correction mechanism, and using rubber air spring to adjust stiffness, the isolation effectiveness is improved.

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2021)

Add to Collection

Article Mechanics

Study of a torsional link with radial springs: Periodic responses under base excitation

Hugo Heidy Miyasato et al.

Summary: This study investigates the importance of torsional flexible links in industrial applications, and proposes that the combination of links and modifications to parameters can result in various nonlinear responses. The results demonstrate that the characteristics of the links lead to different effects under different conditions, such as changes in amplitude response and frequency of excitation.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2021)

Add to Collection

Article Engineering, Mechanical

A novel nonlinear mechanical oscillator and its application in vibration isolation and energy harvesting

Tao Yang et al.

Summary: This study introduces the theory and method of vibration isolation and energy harvesting based on the high-order quasi-zero stiffness (HQZS) mechanism. Research results indicate that the HQZS oscillator shows better performance for ultra-low stochastic excitation intensity or harmonic excitation.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A base excited mixed-connected inerter-based quasi-zero stiffness vibration isolator with mistuned load

Yong Wang et al.

Summary: The dynamic characteristic of the mixed-connected inerter-based quasi-zero stiffness (MC-IQZS) vibration isolator with mistuned load under base excitation is studied, utilizing the Harmonic Balance Method (HBM) to acquire dynamic response. The stability analysis, backbone curve variations, and isolation performance are also investigated, showing that the MC-IQZS isolator can achieve smaller resonance peak and better isolation in high-frequency band compared to the QZS one, albeit with a narrower isolation frequency band.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2021)

Add to Collection

Article Acoustics

Nonlinear Analysis of a Quasi-Zero Stiffness Air Suspension Based on the Cell-Mapping Method

Long Chen et al.

Summary: This paper studies an interconnected quasi-zero stiffness air suspension system, establishes a mathematical model of the nonlinear system, and analyzes the attractive region of the system to verify its performance under stability constraints. The results show that the system provides higher suspension comfort and stability.

INTERNATIONAL JOURNAL OF ACOUSTICS AND VIBRATION (2021)

Add to Collection

Article Engineering, Mechanical

Dynamic analysis and performance evaluation of nonlinear inerter-based vibration isolators

Jian Yang et al.

NONLINEAR DYNAMICS (2020)

Add to Collection

Article Automation & Control Systems

High-Static-Low-Dynamic Stiffness Isolator With Tunable Electromagnetic Mechanism

Yi Sun et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2020)

Add to Collection

Article Acoustics

Design and experiments of a quasi-zero-stiffness isolator with a noncircular cam-based negative-stiffness mechanism

Ming Li et al.

JOURNAL OF VIBRATION AND CONTROL (2020)

Add to Collection

Article Mechanics

Experiment study on nonlinear oscillator containing magnetic spring with negative stiffness

Akintoye Olumide Oyelade

INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Bio-inspired polygonal skeleton structure for vibration isolation: Design, modelling, and experiment

Ge Yan et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2020)

Add to Collection

Article Acoustics

Design of a quasi-zero stiffness isolation system for supporting different loads

Kan Ye et al.

JOURNAL OF SOUND AND VIBRATION (2020)

Add to Collection

Article Engineering, Mechanical

Design and experimental investigation of ultra-low frequency vibration isolation during neonatal transport

Qiang Wang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Engineering, Mechanical

Accurate modeling and analysis of a typical nonlinear vibration isolator with quasi-zero stiffness

Chaoran Liu et al.

NONLINEAR DYNAMICS (2020)

Add to Collection

Article Engineering, Mechanical

A nonlinear ultra-low-frequency vibration isolator with dual quasi-zero-stiffness mechanism

Kai Wang et al.

NONLINEAR DYNAMICS (2020)

Add to Collection

Article Engineering, Mechanical

Increase of quasi-zero stiffness region using two pairs of oblique springs

Feng Zhao et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Engineering, Mechanical

Superior nonlinear passive damping characteristics of the bio-inspired limb-like or X-shaped structure

Jing Bian et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Engineering, Mechanical

Nonlinear stiffness and dynamical response characteristics of an asymmetric X-shaped structure

Yu Wang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Engineering, Mechanical

Nonlinear vibration isolation for fluid-conveying pipes using quasi-zero stiffness characteristics

Hu Ding et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Engineering, Mechanical

Beneficial stiffness design of a high-static-low-dynamic-stiffness vibration isolator based on static and dynamic analysis

Xiaojie Wang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Engineering, Mechanical

A high-static-low-dynamic-stiffness vibration isolator with the auxiliary system

Chaoran Liu et al.

NONLINEAR DYNAMICS (2018)

Add to Collection

Article Mechanics

Experimental Investigation of a Two-Stage Nonlinear Vibration Isolation System With High-Static-Low-Dynamic Stiffness

Zeqi Lu et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2017)

Add to Collection

Article Physics, Applied

Local resonator with high-static-low-dynamic stiffness for lowering band gaps of flexural wave in beams

Jiaxi Zhou et al.

JOURNAL OF APPLIED PHYSICS (2017)

Add to Collection

Article Acoustics

Design and experiment of a high-static-low-dynamic stiffness isolator using a negative stiffness magnetic spring

Yisheng Zheng et al.

JOURNAL OF SOUND AND VIBRATION (2016)

Add to Collection

Article Acoustics

Shock isolation performance of a nonlinear isolator using Euler buckled beam as negative stiffness corrector: Theoretical and experimental study

Xiuchang Huang et al.

JOURNAL OF SOUND AND VIBRATION (2015)

Add to Collection

Article Acoustics

Nonlinear dynamic characteristics of a quasi-zero stiffness vibration isolator with cam-roller-spring mechanisms

Jiaxi Zhou et al.

JOURNAL OF SOUND AND VIBRATION (2015)

Add to Collection

Article Acoustics

Designing of Compact Low Frequency Vibration Isolator with Quasi-Zero-Stiffness

Anvar Valeev et al.

JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL (2015)

Add to Collection

Article Acoustics

Vibration isolation characteristics of a nonlinear isolator using Euler buckled beam as negative stiffness corrector: A theoretical and experimental study

Xiuchang Huang et al.

JOURNAL OF SOUND AND VIBRATION (2014)

Add to Collection

Article Acoustics

On the analytical and experimental assessment of the performance of a quasi-zero-stiffness isolator

Daolin Xu et al.

JOURNAL OF VIBRATION AND CONTROL (2014)

Add to Collection

Article Engineering, Mechanical

Experimental investigation of a vibration isolation system using negative stiffness structure

Thanh Danh Le et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)

Add to Collection

Article Engineering, Mechanical

Force and displacement transmissibility of a nonlinear isolator with high-static-low-dynamic-stiffness

A. Carrella et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2012)

Add to Collection

Article Acoustics

On the force transmissibility of a vibration isolator with quasi-zero-stiffness

A. Carrella et al.

JOURNAL OF SOUND AND VIBRATION (2009)

Add to Collection

Article Acoustics

A study of a nonlinear vibration isolator with a quasi-zero stiffness characteristic

Ivana Kovacic et al.

JOURNAL OF SOUND AND VIBRATION (2008)

Add to Collection

Article Acoustics

Static analysis of a passive vibration isolator with quasi-zero-stiffness characteristic

A. Carrella et al.

JOURNAL OF SOUND AND VIBRATION (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.