4.7 Article

Ablation behavior of single and alternate multilayered ZrC-SiC coatings under oxyacetylene torch

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

Mechanical properties and ablation resistance of La2O3-modified HfC-SiC coating for SiC-coated C/C composites

Guanghui Feng et al.

Summary: The plasma-sprayed La2O3-modified HfC-SiC (HSL) coating exhibits superior ablation resistance and elastic modulus on SiC-coated carbon/carbon composites, primarily attributed to its unique structure and composition.

CORROSION SCIENCE (2021)

Article Materials Science, Multidisciplinary

Design and characterization of zirconium-based multilayer coating for carbon/carbon composites against oxyacetylene ablation

Guanghui Feng et al.

Summary: The study showed that the multilayer coating exhibited better ablation resistance in high-temperature environments, effectively preventing oxidation and deterioration. The monotonically decreased thermal expansion and multiple roles played by the coating are the main reasons for its superior performance.

CORROSION SCIENCE (2021)

Article Materials Science, Ceramics

Effects of reflectivity on laser-ablation resistance of the laser-cladding repaired Nd2O3 modified SiO2 coatings on C/C composites

Han-Hui Wang et al.

Summary: By repairing damaged SiC-coated C/C composites with a double-layer coating, the laser reflection in the repaired area was enhanced to effectively mitigate thermal damage and oxidation. This improvement significantly reduced surface and back temperatures, avoiding ablation reactions and protecting the C/C substrates.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Materials Science, Ceramics

Ablation-resistant Ta0.78Hf0.22C solid solution ceramic modified C/C composites for oxidizing environments over 2200 °C

Yulei Zhang et al.

Summary: Ta0.78Hf0.22C solid solution ceramic was introduced into carbon/carbon (C/C) composites through polymer infiltration and pyrolysis (PIP). The addition of Ta0.78Hf0.22C led to a significant increase in flexural strength and modulus of the composites, as well as improved ablation resistance under high temperature oxyacetylene ablation environment. The enhanced performance was attributed to the formation of oxide particles with low melting point and the solid solution oxide particles that could effectively seal cracks and improve oxygen-barrier capacity.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Materials Science, Ceramics

Ablation resistance of HfC-TaC/HfC-SiC alternate coating for SiC-coated carbon/carbon composites under cyclic ablation

Guanghui Feng et al.

Summary: Alternate coatings of HfC-TaC/HfC-SiC with different sublayer thicknesses were fabricated on SiC-coated carbon/carbon composites, showing the best ablation performance due to the dense oxide layer and stress release from dendritic cracks. Additionally, exfoliation at the interface of adjacent sublayers in some coatings led to violent evaporation of exposed sublayers.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Materials Science, Ceramics

Ablation behavior of ZrC and ZrO2 coatings on SiC coated C/C composites under oxyacetylene torch with different heat fluxes

Guanghui Feng et al.

Summary: The ablation behavior of ZrC and ZrO2 coatings on SiC-coated carbon/carbon composites was studied under different heat fluxes, demonstrating that ZrO2 coating exhibited denser oxide layer and lower mass consumption compared to ZrC. The differences were attributed to higher surface temperature and lower melting point of ZrO2 coating, leading to easier sintering during ablation.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

Exploring processing, reactivity and performance of novel MAX phase/ ultra-high temperature ceramic composites: The case study of Ti3SiC2

Laura Silvestroni et al.

Summary: The reactivity behavior between MAX phase and ZrB2 or WC was explored to develop novel composites, with the former showing enhanced hardness and strength while the latter led to a highly porous composite with poor performance. These findings lay the foundation for the progress of original light ceramics with combined hardness and failure tolerance over a broad temperature range.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Materials Science, Ceramics

Evolution of porosity in suspension thermal sprayed YSZ thermal barrier coatings through neutron scattering and image analysis techniques

Daniel Tejero-Martin et al.

Summary: The research demonstrates that suspension high velocity oxy-fuel spraying can improve the porosity of thermal barrier coatings, and neutron scattering and image analysis techniques are helpful for studying porosity. X-ray diffraction and micro-hardness testing can provide insights into the effects of phase transformation on the mechanical properties of thermal barrier coatings.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Materials Science, Multidisciplinary

Investigation on the ablation performance and mechanism of HfC coating modified with TaC

Guanghui Feng et al.

CORROSION SCIENCE (2020)

Article Materials Science, Ceramics

Thermal properties of polymer-derived ceramic reinforced with boron nitride nanotubes

Yujun Jia et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Article Materials Science, Ceramics

Ablation behaviors of ZrC-TiC coatings prepared by vacuum plasma spray: Above 2000 °C

Xiaohui Pan et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Article Chemistry, Physical

Effect of Al2O3 addition on the ablation behavior of SiC-ZrC coated C/C composites

Caixia Huo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Materials Science, Ceramics

Method to improve the oxidation resistance of ZrB2-based ceramics for reusable space systems

Laura Silvestroni et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

Review Materials Science, Ceramics

Advances in oxidation and ablation resistance of high and ultra-high temperature ceramics modified or coated carbon/carbon composites

Xiaochao Jin et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

Article Materials Science, Multidisciplinary

Ablation resistance of ZrC-MoSi2/ZrC-SiC double-layered coating in a plasma flame

Tao Liu et al.

CORROSION SCIENCE (2018)

Article Materials Science, Coatings & Films

Effect of spraying power on oxidation resistance and mechanical properties of plasma sprayed La-Mo-Si coating

Changcong Wang et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Article Materials Science, Multidisciplinary

Corrosion and thermal cycling behavior of plasma sprayed thermal barrier coatings on die steel

Jia Sun et al.

MATERIALS & DESIGN (2017)

Review Materials Science, Ceramics

Processing and properties of ZrC, ZrN and ZrCN ceramics: a review

R. W. Harrison et al.

ADVANCES IN APPLIED CERAMICS (2016)

Article Materials Science, Ceramics

Ablation and mechanical properties of 3D braided C/ZrC-SiC composites with various SiC/ZrC ratios

Chunlei Yan et al.

CERAMICS INTERNATIONAL (2016)

Article Materials Science, Ceramics

SiC nanowire toughened ZrB2-SiC ablative coating for SiC coated C/C composites

Yulei Zhang et al.

CERAMICS INTERNATIONAL (2015)

Article Materials Science, Ceramics

Oxidation behavior of ZrB2/SiC laminates: Effect of composition on microstructure and mechanical strength

E. Padovano et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)

Article Materials Science, Ceramics

Modeling Oxidation Kinetics of SiC-Containing Refractory Diborides

T. A. Parthasarathy et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2012)

Article Materials Science, Ceramics

Aerothermal behaviour of a SiC fibre-reinforced ZrB2 sharp component in supersonic regime

Diletta Sciti et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

Article Materials Science, Ceramics

ZrB2-SiC laminated ceramic composites

Zhihui Lu et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

Article Materials Science, Ceramics

Oxidation of ZrC-30 vol% SiC composite in air from low to ultrahigh temperature

Liyou Zhao et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

Article Materials Science, Ceramics

Laser Melting of Zirconium Carbide: Determination of Phase Transitions in Refractory Ceramic Systems

Heather F. Jackson et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)

Review Materials Science, Coatings & Films

Microstructures and Ablation Resistance of ZrC Coating for SiC-Coated Carbon/Carbon Composites Prepared by Supersonic Plasma Spraying

Heng Wu et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2011)

Article Nanoscience & Nanotechnology

Laminated ZrB2-SiC ceramic with improved strength and toughness

Peng Zhou et al.

SCRIPTA MATERIALIA (2011)

Letter Chemistry, Physical

SiCn/SiC oxidation protective coating for carbon/carbon composites

Huang Jian-Feng et al.

CARBON (2009)

Article Materials Science, Multidisciplinary

Oxidation mechanism and resistance of ZrB2-SiC composites

Ping Hu et al.

CORROSION SCIENCE (2009)

Article Materials Science, Ceramics

Mechanical and physical behavior of spark plasma sintered ZrC-ZrB2-SiC composites

Shu-Qi Guo et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2008)

Article Nanoscience & Nanotechnology

Silicon carbide coating to protect carbon/carbon composites against oxidation

QG Fu et al.

SCRIPTA MATERIALIA (2005)

Article Engineering, Aerospace

Aerothermodynamic study of UHTC-based thermal protection systems

R Savino et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2005)