☆ 4.4 Article

Fabrication of a high-performance polyurethane pervaporation membrane via surface grafting of silane coupling agent

JOURNAL OF POLYMER RESEARCH (2022)

Related references

Note: Only part of the references are listed.

Article Polymer Science

A comparative investigation on different silane coupling agents modified sericite mica/polyimide composites prepared by in situ polymerization

Chunguang Xiao et al.

Summary: The study found that the two-phase interfacial adhesion between KH550-SM and the PI matrix was the strongest, leading to the best thermal and mechanical properties in the PI/KH550-SM composite, as well as the lowest dielectric constant and loss.

POLYMER BULLETIN (2021)

Add to Collection

Article Engineering, Chemical

Ozone compatibility with polymer nanofiltration membranes

Sara Ouali et al.

Summary: In this study, the resistance of three commercial polymer nanofiltration membranes to ozone was investigated, revealing a decrease in pure water permeability for NP10 membrane and a dramatic increase for thin-film composite polyamide membranes. The polyethersulfone matrix showed good resistance to ozone, while the polyvinylpyrrolidone additive was substantially oxidized. The active layers of the NF90 and NF270 membranes were severely damaged after ozonation, leading to a sharp increase in permeability.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Glass fiber-epoxy interactions in the presence of silane: A molecular dynamics study

Sanjib C. Chowdhury et al.

Summary: In this study, the interaction between epoxy resin and glass fiber in the presence of monolayer glycidoxypropyl-trimethoxy silane was investigated through molecular dynamics simulations. The presence of silane introduced covalent bonding interactions in the fiber-epoxy interphase, significantly enhancing composite strength and energy absorption capability. The simulation results suggest that a silane number density of 1-2 nm(-2) is optimal for achieving high strength and energy absorption in the composite system studied.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Engineering, Chemical

Surface modification of polypropylene membrane by helium plasma treatment for membrane distillation

Marek Gryta

Summary: Helium plasma treatment improved the surface properties of commercial polypropylene capillary membranes, increasing the permeate flux in membrane distillation while maintaining resistance to wetting. Hydrophilic compounds formed during plasma treatment significantly reduced oil fouling in water contaminated by oil.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Engineering, Chemical

Enhanced desulfurization performance of polyethylene glycol membrane by incorporating metal organic framework MOF-505

Wenyan Shi et al.

Summary: Synthesis of metal-organic framework MOF-505 particles and their incorporation into a polyethylene glycol matrix led to improved desulfurization performance in mixed matrix membranes. The membrane with 3 wt% MOF-505 showed optimal desulfurization performance, with a permeation flux and enrichment sulfur factor increased by 158% and 25% compared to the pristine membrane, respectively.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Enhanced interfacial properties of carbon fiber/epoxy composites by coating carbon nanotubes onto carbon fiber surface by one-step dipping method

Shu Xiong et al.

Summary: A multi-scale reinforcement material of carbon fiber/carbon nanotubes (CF/CNTs) was prepared using a one-step dipping method, with significant improvements in wettability, chemical activity, and tensile strength of the modified CFs. The synergistic effect of the silane coupling agent and CNTs enhanced the interfacial properties of the composite material. The bridging effect of CNTs as an interfacial reinforcing mechanism was proposed, showing promising potential for surface modification and interfacial enhancement of CF materials.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Engineering, Chemical

Polyacrylic acid-brushes tethered to graphene oxide membrane coating for scaling and biofouling mitigation on reverse osmosis membranes

Ali Ansari et al.

Summary: The study found that membranes coated with graphene oxide and polyacrylic acid had significant effects on reducing scaling and biofouling. The decrease in surface charge and increase in hydrophilicity were key factors in improving membrane performance.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Engineering, Chemical

Polytetrafluoroethylene (PTFE) hollow fibers modified by hydrophilic crosslinking network (HCN) for robust resistance to fouling and harsh chemical cleaning

Wanting Liu et al.

Summary: The chemical washing resistance of hydrophilic PTFE hollow fiber membrane was successfully enhanced through interface impregnation and crosslinking, resulting in better resistance to BSA, HA, and soybean oil fouling. The modified membrane maintained its hydrophilic and chemical stability after strong acidic, alkaline, and oxidization cleaning, showcasing its great potential in treating highly contaminated wastewater.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Engineering, Chemical

Co-deposition of pyrogallol/polyethyleneimine on polymer membranes for highly efficient treatment of oil-in-water emulsion

Chengjiang Zuo et al.

Summary: The bio-inspired biomimetic hydrophilic coating design strategy proposed in this work successfully converted the surface wettability of PVDF membrane from hydrophobic to superhydrophilic, with the membrane deposited with a PG/PEI mass ratio of 1:1 exhibiting the best hydrophilicity and water permeation flux. The PVDF-PG/PEI-0.2/0.2 membrane achieved the highest flux of 1053 L·m-2·h-1 and oil rejection of 98.3% when treating toluene-in-water emulsion. The high reusability of the modified PVDF membrane makes the proposed strategy significant for hydrophilic modification of polymer membranes.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Rapid and eco-friendly technique for surface modification of TFC RO membrane for improved filtration performance

Ying Siew Khoo et al.

Summary: This study utilized an environmentally friendly PECVD technique to modify the surface properties of commercial thin film composite XLE RO membrane, showing that O-2-modified membrane outperformed PANI-modified and unmodified membranes in terms of fouling resistance and desalination performance. The results demonstrated that the O-2 modification enhanced surface hydrophilicity, water permeability, and rejection rates of NaCl and Na2SO4.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Polymer Science

Analysis of crystallization kinetics and shape memory performance of PEG-PCL/MWCNT based PU nanocomposite for tissue engineering applications

M. Zakizadeh et al.

Summary: Reactive in-situ polyurethane nanocomposites were synthesized using triblock copolymer and MWCNTs, leading to optimized shape memory performance through tuning crystallization mechanisms of soft domains. Nanoparticles acted as phase controllers, affecting chain confinement and crystals' morphology, resulting in a wide range of shape fixity and recovery ratios. The presence of PCL grafts influenced the microstructure of PUs, increasing thermal stability and growth rate of crystallites.

EXPRESS POLYMER LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Superhydrophobic and breathable SiO2/polyurethane porous membrane for durable water repellent application and oil-water separation

Haihong Gu et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Engineering, Chemical

Fabrication of a super hydrophobic polyvinylidene fluoride-hexadecyltrimethoxysilane hybrid membrane for carbon dioxide absorption in a membrane contactor

Honglei Pang et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Article Engineering, Chemical

Preparation of re-entrant and anti-fouling PVDF composite membrane with omniphobicity for membrane distillation

Wei Zhang et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Article Engineering, Chemical

High-performance and acid-resistant nanofiltration membranes prepared by solvent activation on polyamide reverse osmosis membranes

Min Gyu Shin et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

PEG@ZIF-8/PVDF Nanocomposite Membrane for Efficient Pervaporation Desulfurization via a Layer-by-Layer Technology

Hexiang Sun et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Review Environmental Sciences

Catalytic Ozonation and Membrane Contactors-A Review Concerning Fouling Occurrence and Pollutant Removal

Savvina Psaltou et al.

WATER (2020)

Add to Collection

Article Engineering, Chemical

Fabrication of a superhydrophilic PVDF membrane with excellent chemical and mechanical stability for highly efficient emulsion separation

Ming Wang et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Hexadecyltrimethoxysilane-Modified SiO2 Nanoparticle-Coated Halloysite Nanotubes Embedded in Silicone-Acrylic Polymer Films as Durable Fluorine-Free Superhydrophobic Coatings

Tingting Ren et al.

ACS APPLIED NANO MATERIALS (2020)

Add to Collection

Article Engineering, Chemical

A water-based mixing process for fabricating ZIF-8/PEG mixed matrix membranes with efficient desulfurization performance

Xiaolong Han et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Preparation and characterization of surface grafting polymer of ZrO2 membrane and ZrO2 powder

Dan Li et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Engineering, Chemical

Hybrid membranes with Cu(II) loaded metal organic frameworks for enhanced desulfurization performance

Yimeng Song et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Article Polymer Science

Mechanical and nonisothermal crystallization properties of coal gasification fine slag glass bead-filled polypropylene composites

Weidong Ai et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2019)

Add to Collection

Article Engineering, Chemical

Facile performance enhancement of reverse osmosis membranes via solvent activation with benzyl alcohol

Min Gyu Shin et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

Add to Collection

Article Engineering, Chemical

Improving the pervaporation performance of PDMS membranes for n-butanol by incorporating silane-modified ZIF-8 particles

Shufeng Li et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Textiles

A Superhydrophobic and Antibacterial Surface Coated on Cotton Fabrics by Polydopamine

Jieyao Song et al.

FIBERS AND POLYMERS (2019)

Add to Collection

Article Chemistry, Physical

Development of Structure in Hexadecyltrimethoxysilane Adsorbed on Silica

Helanka J. Perera et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Add to Collection

Article Engineering, Chemical

Improved desulfurization performance of polydimethylsiloxane membrane by incorporating metal organic framework CPO-27-Ni

Xiaolong Han et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Article Energy & Fuels

Pervaporative desulfurization of n-heptane/thiophene model gasoline for modified polyether-block-amide (Pebax) membrane

Haikuan Yuan et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2019)

Add to Collection

Article Chemistry, Physical

Assessing effects of (3-aminopropyl) trimethoxysilane self-assembled layers on surface characteristics of organosilane-grafted moisture-crosslinked polyethylene substrate: A comparative study between chemical vapor deposition and plasma-facilitated in situ grafting methods

Navid Mostofi Sarkari et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Engineering, Chemical

Modified Silica Incorporating into PDMS Polymeric Membranes for Bioethanol Selection

Ping Peng et al.

ADVANCES IN POLYMER TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Paper & Wood

Effect of synthetic conditions on the morphology and gasoline desulfurization performance of microphase-separated membranes

S. Sha et al.

CELLULOSE (2018)

Add to Collection

Article Energy & Fuels

Elevated performance of hybrid membranes by incorporating metal organic framework CuBTC for pervaporative desulfurization of gasoline

Shengnan Yu et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2018)

Add to Collection

Article Engineering, Chemical

Gas separation in polyimide membranes with molecular sieve-like chemical/physical dual crosslink elements onto the top of surface

Ryosui Iwasa et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Add to Collection

Article Materials Science, Textiles

Preparation of Carbon Nanotubes/Polyurethane Hybrids as a Synergistic Absorbent for Efficient Oil/Water Separation

Tao Zhang et al.

FIBERS AND POLYMERS (2018)

Add to Collection

Review Energy & Fuels

Pervaporative desulfurization of gasoline: A review

Aziz Fihri et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2016)

Add to Collection

Article Polymer Science

Waterborne POSS-silane-urethane hybrid polymer and the fluorinated films

Siyu Chen et al.

POLYMER (2016)

Add to Collection

Article Engineering, Chemical

Morphological and hydrophobic modifications of PVDF flat membrane with silane coupling agent grafting via plasma flow for VMD of ethanol-water mixture

Wan-Ta Xu et al.

JOURNAL OF MEMBRANE SCIENCE (2015)

Add to Collection

Article Chemistry, Applied

Hydrogenation of the Aromatics and Olefins in FCC Gasoline During Deep Desulphurisation

Jeno Hancsok et al.

TOPICS IN CATALYSIS (2011)

Add to Collection

Article Engineering, Chemical

Pervaporation performance of crosslinked polydimethylsiloxane membranes for deep desulfurization of FCC gasoline - I. Effect of different sulfur species

Jian Chen et al.

JOURNAL OF MEMBRANE SCIENCE (2008)

Add to Collection

Article Energy & Fuels

FCC gasoline sulfur reduction by additives: A review

M. A. B. Siddiqui et al.

PETROLEUM SCIENCE AND TECHNOLOGY (2007)

Add to Collection

Review Chemistry, Physical

On the hydrodesulfurization of FCC gasoline:: a review

S Brunet et al.

APPLIED CATALYSIS A-GENERAL (2005)

Add to Collection

Article Chemistry, Physical

Feed and process effects on the in situ reduction of sulfur in FCC gasoline

JA Valla et al.

APPLIED CATALYSIS A-GENERAL (2004)

Add to Collection

Review Energy & Fuels

Science and technology of novel processes for deep desulfurization of oil refinery streams: A review

IV Babich et al.

FUEL (2003)

Add to Collection

Article Chemistry, Applied

The effects of fluorine, phosphate and chelating agents on hydrotreating catalysts and catalysis

MY Sun et al.

CATALYSIS TODAY (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.