4.6 Article

Multiple Strategies to Approach High-Efficiency Luminescence Controllable in Blue/Cyan/Green-Emitting Bi3+-Activated Phosphors

Related references

Note: Only part of the references are listed.
Article Nanoscience & Nanotechnology

Full-Spectrum White Light-Emitting Diodes Enabled by an Efficient Broadband Green-Emitting CaY2ZrScAl3O12:Ce3+ Garnet Phosphor

Lina Cao et al.

Summary: In this study, a new phosphor was reported for the fabrication of high-quality and full-visible-spectrum warm-white LED devices. The phosphor exhibited low color-correlated temperatures and high color rendering indexes, and it matched well with commercial blue LED chips. The combination of this phosphor with a red phosphor resulted in bright warm-white light.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Engineering, Environmental

Full-visible-spectrum lighting enabled by site-selective occupation in the high efficient and thermal stable (Rb, K)2CaPO4F: Eu2+ solid-solution phosphors

Dewu Wu et al.

Summary: This study successfully achieved large-scale redshift regulation of emission spectrum from cyan to red by manipulating the site-selective occupation of Eu2+ activators with K+ substitution, providing a versatile color output for developing high-quality white light-emitting diodes.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Environmental

MMCT-induced high-bright yellow light-emitting phosphor Bi3+-activated Ba2YGaO5 used for WLED

Shanshan Ye et al.

Summary: This study achieved high brightness yellow light with Bi3+ activated Ba2YGaO5, exhibiting good thermal stability and an internal quantum efficiency of up to 92%. The excellent luminescence properties were attributed to the Metal-to-metal charge transfer (MMCT) state.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Optics

Two Selective Sites Control of Cr3+-Doped ABO4 Phosphors for Tuning Ultra-Broadband Near-Infrared Photoluminescence and Multi-Applications

Qianqian Zhang et al.

Summary: A series of new NIR-emitting phosphors with tunable photoluminescence based on crystallographic site engineering and crystal field regulation have been developed, achieving large spectral tuning from NIR-I to NIR-II and tailoring the full-width at half maximum. These phosphors have potential multiple applications in NIR spectroscopy detection, night vision, penetrating biology tissue, etc., demonstrating the effective tuning of NIR optical properties for multi-photoelectric applications through crystallographic site engineering.

LASER & PHOTONICS REVIEWS (2022)

Article Materials Science, Multidisciplinary

Trade-off Lattice Site Occupancy Engineering Strategy for Near-Infrared Phosphors with Ultrabroad and Tunable Emission

Tianchun Lang et al.

Summary: This study successfully developed a series of broadband near-infrared emitting garnet phosphors with a wide emission range and significant thermal stability, which could serve as potential materials for phosphor-converted NIR LEDs.

ADVANCED OPTICAL MATERIALS (2022)

Article Engineering, Environmental

Anti-thermal-quenching, color-tunable and ultra-narrow-band cyan green-emitting phosphor for w-LEDs with enhanced color rendering

Zhi Zhou et al.

Summary: This study reports emission-tunable solid solution phosphors with superior luminescence properties and anti-thermal-quenching behavior. Doping Ga3+ ions into the phosphor matrix enhances emission and enables tuning from green to cyan. w-LEDs fabricated using these phosphors show superior color rendering index, indicating potential for high-power w-LED applications in the future.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Materials Science, Multidisciplinary

Metal To Metal Charge Transfer Induced Efficient Yellow/Far-Red Luminescence in Na2Ca3(Nb, Ta)2O9:Bi3+ toward the Applications of White-LEDs and Plant Growth Light

Hongzhi Zhang et al.

Summary: Realizing metal to metal charge transfer (MMCT) in Bi3+-doped phosphors is a new strategy to achieve efficient and tunable far-red luminescence. Na2Ca3(Nb, Ta)2O-9:Bi3+ exhibits intense absorption in near-ultraviolet region and no absorption in visible region, making it a promising material for plant growth light applications.

ADVANCED OPTICAL MATERIALS (2022)

Article Chemistry, Physical

Bi3+ occupancy rearrangement in K2-xAxMgGeO4 phosphor to achieve ultra-broad-band white emission based on alkali metal substitution engineering

Haifeng Zhu et al.

Summary: The cationic substitution engineering in KMGO:Bi3+ using Li+ and Na+ leads to the generation of extra luminescent centers, expanding the full width at half maximum (FWHM) to 204 nm and forming a bright white emission. On the other hand, modulation of Rb+ increases the activation energy and enhances thermal stability of the material. The high R-a values of the fabricated WLED suggest that K1.456Na0.54MgGeO4:0.004Bi(3+) could serve as a single-component white phosphor in solid-state lighting. This research highlights the significance of alkali metal substitution engineering in controlling luminescence emissions and improving thermal stability.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Characterizations and photoluminescence properties of a dual-functional La2LiNbO6:Bi3+, Eu3+ phosphor for WLEDs and ratiometric temperature sensing

Mingjun Song et al.

Summary: Color-tunable luminescent materials based on multi-emitting centers, such as La2LiNbO6:Bi3+, Eu3+, have attracted attention for their potential applications in display, lighting, and temperature sensing. This research explores the band structure, luminescence properties, and temperature-sensitive behaviors of the novel phosphor, highlighting efficient energy transfer between Bi3+ and Eu3+ ions. Preliminary evaluation of the La2LiNbO6:Bi3+, Eu3+ phosphor in WLED demonstrates its promising performance in terms of photoelectric parameters.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Inorganic & Nuclear

Composition and Antithermal Quenching of Noninteger Stoichiometric Eu2+-Doped Na-β-Alumina with Cyan Emission for Near-UV WLEDs

Rou Shi et al.

Summary: Phosphors with high quantum efficiency and thermal stability are crucial in improving the performance of pc-WLEDs. In this study, a series of near-UV excitable cyan-emitting Eu2+-activated phosphors were proposed, showing good quantum efficiency and thermal stability under excitation at 365 nm, suitable for pc-WLEDs. The unique combination of rigid structure and deep trap level in these phosphors may offer an effective route for developing new phosphors with high efficiency and stability.

INORGANIC CHEMISTRY (2021)

Article Chemistry, Inorganic & Nuclear

Novel Cyan-Green-Emitting Bi3+-Doped BaScO2F, R+ (R = Na, K, Rb) Perovskite Used for Achieving Full-Visible-Spectrum LED Lighting

Mingsheng Cai et al.

Summary: Cyan-emitting phosphors doped with bismuth in barium scandium oxyfluoride perovskite were successfully synthesized, exhibiting cyan-green light emission and improved photoluminescence and thermal stability. By using a blend of phosphors, a high-quality full-spectrum white LED device was fabricated, and a novel strategy was explored to produce white LED with different color temperatures using different phosphors.

INORGANIC CHEMISTRY (2021)

Article Multidisciplinary Sciences

Li/Na substitution and Yb3+ co-doping enabling tunable near-infrared emission in LiIn2SbO6:Cr3+ phosphors for light-emitting diodes

Gaochao Liu et al.

Summary: Cr3+-activated LiIn2SbO6 exhibits a broad emission band from 780 to 1400 nm upon 492 nm excitation, which can be tuned by Li/Na substitution and shows stronger NIR fluorescence peak with Yb3+ co-doping. The designed NIR pc-LED package has the ability to penetrate pork tissues and monitor the insertion depth of a needle, indicating potential application in non-destructive monitoring.

ISCIENCE (2021)

Article Chemistry, Multidisciplinary

Tailoring of White Luminescence in a NaLi3SiO4:Eu2+ Phosphor Containing Broad-Band Defect-Induced Charge-Transfer Emission

Ming Zhao et al.

Summary: The study successfully designed and synthesized white NaLi3Si1-xO4:Eu2+ materials with defect engineering, achieving white luminescence in single-dopant activated solid phosphors. Reducing the Si content resulted in white emission, with a newly appeared broadband yellow peak attributed to charge-transfer transitions involving Eu2+ and nearby defects.

ADVANCED MATERIALS (2021)

Article Engineering, Environmental

Hetero-valent substitution strategy toward orange-red luminescence in Bi3+ doped layered perovskite oxide phosphors for high color rendering index white light-emitting diodes

Peipei Dang et al.

Summary: The study successfully achieved continuous emission tuning and optimization of emission performance of Sr1-xLa1+xZnO3.5+x/2:Bi3+ (0 < x < 0.4) solid solution through hetero-valent substitution strategy, providing a new way for optimizing phosphor materials for solid-state lighting.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Chemistry, Physical

Advances in Near-Infrared Luminescent Materials without Cr3+: Crystal Structure Design, Luminescence Properties, and Applications

Yi Wei et al.

Summary: This review systematically summarizes the photoluminescence properties of NIR luminescent materials without Cr3+, highlighting the significant influence of local crystal structure on NIR luminescence properties. The proposed structure-luminescence relationship provides new insights into the development and optimization of NIR luminescent materials. Additionally, high-throughput DFT prediction-crystal structure design-photoluminescence performance optimization concept is proposed for the rapid development of targeted NIR luminescent materials.

CHEMISTRY OF MATERIALS (2021)

Article Chemistry, Physical

An efficient perovskite-type Rb2CaPO4F:Eu2+ phosphor with high brightness towards closing the cyan gap

Rong Zhang et al.

Summary: A promising cyan-emitting phosphor Rb2CaPO4F:Eu2+ with good thermal stability and high internal quantum efficiency was synthesized in this study, which can serve as a candidate to fill the cyan gap in the full-visible spectrum. This research also demonstrates great potential for exploring novel phosphors inspired by mineral-type structural prototypes.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Materials Science, Multidisciplinary

Site occupancy and photoluminescence properties of cyan-emitting K2Ca2Si2O7:Bi3+ phosphor for white light emitting diodes

Zhihua Leng et al.

Summary: The development of a new cyan-emitting K2Ca2Si2O7:Bi3+ phosphor helps fill the cyan gap in the spectra of traditional phosphor converted white light emitting diodes (pc-WLEDs) and shows potential applications in n-UV excited full-spectrum white LEDs. This phosphor features a broadband cyan emission peak at 490 nm and characterizes asymmetric broad emission due to the accommodation of Bi3+ ions in different types of sites within the structure. The concentration quenching mechanism in K2Ca2Si2O7:xBi(3+) phosphors is proven to be dipole-dipole interaction.

OPTICAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Tuning Emission from Greenish to Blue via Chemical Composition Modulation in Solid Solutions (Sr1-yCay)2Sb2O7:Bi3+ under near-UV Light Excitation

Dan Zhao et al.

Summary: A new antimonate phosphor (Sr1-yCay)(2)Sb2O7:Bi3+ was successfully prepared with controllable color emitting properties from greenish to blue. The study revealed that increasing Ca constituents led to a blue-shift in emitting bands and measured the internal quantum efficiency of different phosphors. Furthermore, a white illuminating lamp was produced using a combination of UV chip, blue phosphor, greenish phosphor, and red phosphor.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Optics

Anti-Thermal-Quenching Bi3+ Luminescence in a Cyan-Emitting Ba2ZnGe2O7:Bi Phosphor Based on Zinc Vacancy

Yi Wei et al.

Summary: Ba2ZnGe2O7:Bi3+ phosphor exhibits anti-thermal-quenching property with increased emission intensity at high temperatures. Artificially creating zinc and oxygen vacancy defects can enhance emission intensity. The anti-TQ phenomenon is mainly attributed to high structure rigidity and strong ability to compensate emission loss.

LASER & PHOTONICS REVIEWS (2021)

Article Chemistry, Physical

Closing the Cyan Gap Toward Full-Spectrum LED Lighting with NaMgBO3:Ce3+

Jiyou Zhong et al.

CHEMISTRY OF MATERIALS (2020)

Article Chemistry, Multidisciplinary

YAG:Ce3+ Transparent Ceramic Phosphors Brighten the Next-Generation Laser-Driven Lighting

Qi Yao et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Multidisciplinary

Bi3+-Er3+ and Bi3+-Yb3+ Codoped Cs2AgInCl6 Double Perovskite Near Infrared Emitters

Habibul Arfin et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Materials Science, Multidisciplinary

Enhanced Cyan Emission and Optical Tuning of Ca3Ga4O9:Bi3+for High-Quality Full-Spectrum White Light-Emitting Diodes

Dongjie Liu et al.

ADVANCED OPTICAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Design of a Bismuth-Activated Narrow-Band Cyan Phosphor for Use in White Light Emitting Diodes and Field Emission Displays

Shanshan Ye et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Article Chemistry, Multidisciplinary

Properties and Application of Single Eu2+-Activated Color Tuning Phosphors

Xiangting Zhang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Article Materials Science, Multidisciplinary

Cr3+-Doped Broadband NIR Garnet Phosphor with Enhanced Luminescence and its Application in NIR Spectroscopy

Liangliang Zhang et al.

ADVANCED OPTICAL MATERIALS (2019)

Review Chemistry, Multidisciplinary

UV, Blue, Green, Yellow, Red, and Small: Newest Developments on Eu2+-Doped Nanophosphors

Huayna Terraschke et al.

CHEMICAL REVIEWS (2015)