The impact of variable density in-plane perforations on fracture propagation and complexity control in the horizontal well

To understand the fracture behavior for variable density in-plane perforations on a horizontal well, true triaxial hydraulic fracturing experiments were performed with acoustic emission monitoring. The experimental results indicate that the variable density in-plane perforations can not only create transverse fractures but also arrest fracture propagation toward undesirable zones. The in situ stress and treatment parameters play significant roles in the fracture morphology and breakdown pressure. Under a large horizontal principal stress difference, there is a high possibility for simple transverse fracture creation, which results in a lower breakdown pressure. Moreover, the decrease in fracturing fluid viscosity can increase the fracture complexity and increase in pump rate can increase breakdown pressure and induce the complex fracture geomtetry. The acoustic emission (AE) characteristics and cutting fracture morphology demonstrate that not all perforations can be successfully initiated during the fracturing process. Because of the stress interaction from side perforations, fracture initiation and propagation from the middle perforation are strongly suppressed. Although the middle fracture is not fully initiated and propagated, it is still beneficial for the side hydraulic fracture connection and propagation in one plane. Secondary and axial fractures can still be observed, primarily due to the stress interaction between neighboring perforations and misalignment of the perforation tunnel orientation with the principal stress direction. In addition, the creation of complex fractures tends to occur using a high pump rate, which relates to tense fluid distribution competition from each perforation tunnel. Fracture initiation may follow an order but mostly tends to initiate from side perforations. Because of the stress interaction, hydraulic fractures from the side perforation can sometimes deviate from the perforation tunnel direction, twist and kink, and finally, generate nonplanar fractures. A large horizontal principal stress difference is recommended and beneficial for simple, straight and planar fracture creation during hydraulic fracturing stimulation with variable density in-plane completion for the horizontal well.

Automated summary

Variable density in-plane perforations in a horizontal well can create transverse fractures and prevent fracture propagation, with the in situ stress and treatment parameters significantly influencing fracture morphology and breakdown pressure.