Effective removal of fluoride by porous MgO nanoplates and its adsorption mechanism

Porous MgO nanoplates were successfully synthesized through a facile and cost-effective precursor calcination method. The as-prepared porous MgO nanoplates were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Brunauer-Emmett-Teller measurements. The fluoride removal performance of the porous MgO nanoplates has been investigated. The fluoride adsorption rate of the absorbent was very fast, and the adsorption kinetics could be fitted into a pseudo-second-order model. The adsorption isotherm can be well fitted in Freundlich model, while the adsorption capacity was over 185.5 mg/g at pH 7. Furthermore, the porous MgO nanoplates can efficiently remove fluoride from water in a wide pH range of 2-10, which is favorable for practical application. The effect of co-existing anions on fluoride removal also has been investigated. The result indicated that the existence of carbonate, bicarbonate and phosphate can influenced the fluoride adsorption performance. Furthermore, the fluoride adsorption mechanism was investigated by the FTIR and XPS analysis. The results show that both the hydroxyl and surface carbonates can exchange with fluoride ions, revealing a hydroxyl and carbonate co-exchange mechanism. Moreover, the as-prepared porous MgO nanoplates is quite stable, only less than 0.18% of the absorbent was dissolved during the adsorption experiment. The results indicated that the as-prepared porous MgO nanoplates can be used as a potential suitable candidate for fluoride removal. (C) 2016 Elsevier B.V. All rights reserved.