☆ 4.7 Article

Hydrogen bonding assisted OH- transport under low humidity for rapid start-up in AEMFCs

JOURNAL OF MEMBRANE SCIENCE (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Tailoring catalyst layer structures for anion exchange membrane fuel cells by controlling the size of ionomer aggreates in dispersion

Jonghyun Hyun et al.

Summary: The rational design guide for cathode and anode catalyst layers using m-TPN1 ionomer can lead to a more uniform ionomer distribution and larger triple-phase-boundary. Enhanced power density of membrane-electrode-assembly is achieved as the ionomer distribution of the cathode catalyst layer becomes more uniform. The power density at fully humidified condition is strongly correlated with the porosity of anode catalyst layer due to the limitation of hydrogen transport at anode by water flooding.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Understanding dynamic behavior of proton exchange membrane fuel cell in the view of internal dynamics based on impedance

Hao Yuan et al.

Summary: In this paper, the transient characteristic of the proton exchange membrane (PEM) fuel cell is studied. The fixed frequency impedance is used as an assist signal for voltage response interpretation and internal mechanism analysis. The effects of different conditions on the dynamic response of the PEM fuel cell are investigated, and the transient variation of impedance under different current densities is studied. The results show that the voltage response is closely related to internal hydration state and oxygen transfer.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Poly(Alkyl-Terphenyl Piperidinium) Ionomers and Membranes with an Outstanding Alkaline-Membrane Fuel-Cell Performance of 2.58 W cm-2

Nanjun Chen et al.

Summary: The study introduces aliphatic chain-containing PDTP copolymers to enhance the performance of AEMFCs. By reducing phenyl content in AEIs and improving mechanical properties in AEMs, PDTP materials exhibit excellent performance indicators such as mechanical properties, fuel barrier properties, ion conductivity, and stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Engineering, Chemical

Highly sulfonated carbon nano-onions as an excellent nanofiller for the fabrication of composite proton exchange membranes with enhanced water retention and durability

Lili Liu et al.

Summary: The study demonstrates the use of highly sulfonated carbon nano-onions as nanofillers in sulfonated poly(arylene ether sulfone) for the construction of composite membranes with excellent thermal and proton conductivity performance.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Engineering, Chemical

Exploring H-bonding interaction to enhance proton permeability of an acid-selective membrane

Wanjie Song et al.

Summary: In this study, acid-selective membranes were successfully fabricated by grafting urea and quaternary ammoniums onto hydrophobic polymer backbones. The intramolecular H-bonding interactions between urea units facilitated self-assembly of the side chains and the formation of continuous acid transport channels, while the produced QA clusters enabled fast anion transportation. The resulting membranes exhibited high acid/salt selectivity and operational stability, making them promising for acid recovery applications.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Electron-Donating C-NH2 Link Backbone for Highly Alkaline and Mechanical Stable Anion Exchange Membranes

Fan Zhang et al.

Summary: By converting C=O groups to C-NH2 linkages, the stability of poly(arylene ether ketone) materials can be improved, increasing hydroxide transport sites, enhancing conductivity, and tensile strength.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Densely Quaternized Fluorinated Poly(fluorenyl ether)s with Excellent Conductivity and Stability for Vanadium Redox Flow Batteries

Yu Chen et al.

Summary: The design of DQA-TAPFE ion exchange membranes with a rigid fluorinated backbone and flexible multi-cationic side chains shows promising potential for vanadium redox flow battery applications. Compared to traditional dispersal of cationic groups, DQA-TAPFE exhibits higher SO42- conductivity and lower VO2+ permeability, leading to improved energy efficiency and capacity retention in VRFBs.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

A rod-coil grafts strategy for N-spirocyclic functionalized anion exchange membranes with high fuel cell power density

Yang Zhang et al.

Summary: The study proposed a rod-coil grafts design to enhance microphase separation in N-spirocyclic anion exchange membranes, resulting in improved conductivity and toughness. By optimizing the n-octylamine hydrophobic coil graft length, the N-spirocyclic AEM showed high OH- conductivity and power density, placing it among the top level of cycloaliphatic AEMs reported in literature.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Sustainable energy development: History of the concept and emerging themes

I Gunnarsdottir et al.

Summary: Sustainable energy development is a complex concept aiming to promote sustainability through providing affordable modern energy services, achieving sustainable energy supply and consumption, and ensuring energy security.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Add to Collection

Article Chemistry, Physical

Ultra-thin quaternized polybenzimidazole anion exchange membranes with throughout OH- conducive highway networks for high-performance fuel cells

Xiaozhou Wang et al.

Summary: This study establishes an ion conductive highway network in quaternized polybenzimidazole (PBI) AEMs to enhance ion conductivity and mechanical strength, leading to a high peak power density of about 1162.3 mW cm(-2) in H-2/O-2 fuel cells. The design of throughout conductive highway network makes PBI material one of the best candidates for AEMFCs.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Engineering, Chemical

Structure-transport relationships of poly(aryl piperidinium) anion-exchange membranes: Eeffect of anions and hydration

Xiaoyan Luo et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Article Engineering, Environmental

Self-organized nanostructured anion exchange membranes for acid recovery

Wengen Ji et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Chemical

Improving fuel cell performance of an anion exchange membrane by terminal pending bis-cations on a flexible side chain

Yang Wang et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Article Multidisciplinary Sciences

Using operando techniques to understand and design high performance and stable alkaline membrane fuel cells

Xiong Peng et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Physical

Achieving High-Performance and 2000 h Stability in Anion Exchange Membrane Fuel Cells by Manipulating Ionomer Properties and Electrode Optimization

Noor Ul Hassan et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Asymmetric electrode ionomer for low relative humidity operation of anion exchange membrane fuel cells

Daniel P. Leonard et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Polymer Science

Synthesis of Aromatic Anion Exchange Membranes by Friedel-Crafts Bromoalkylation and Cross-Linking of Polystyrene Block Copolymers

Jong Yeob Jeon et al.

MACROMOLECULES (2019)

Add to Collection

Article Engineering, Environmental

Model based evaluation of alkaline anion exchange membrane fuel cells with water management

Dang Saebea et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Multidisciplinary Sciences

Superlattice by charged block copolymer selfassembly

Jimin Shim et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Energy & Fuels

Poly(aryl piperidinium) membranes and ionomers for hydroxide exchange membrane fuel cells

Junhua Wang et al.

NATURE ENERGY (2019)

Add to Collection

Article Chemistry, Physical

Ionomer Cross-Linking Immobilization of Catalyst Nanoparticles for High Performance Alkaline Membrane Fuel Cells

Xian Liang et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection

Article Engineering, Chemical

Crosslinked norbornene copolymer anion exchange membrane for fuel cells

Chao Wang et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Add to Collection

Review Engineering, Chemical

Selectivity of ion exchange membranes: A review

Tao Luo et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Anion exchange membrane fuel cells: Current status and remaining challenges

Shimshon Gottesfeld et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Chemistry, Physical

Importance of balancing membrane and electrode water in anion exchange membrane fuel cells

T. J. Omasta et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Chemistry, Physical

Self-assembled highly ordered acid layers in precisely sulfonated polyethylene produce efficient proton transport

Edward B. Trigg et al.

NATURE MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Anion exchange membranes with branched ionic clusters for fuel cells

Yubin He et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Poly(2,6-dirnethyl-1,4-phenylene oxide)s with Various Head Groups: Effect of Head Groups on the Properties of Anion Exchange Membranes

Haeryang Lim et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Beneficial use of rotatable-spacer side-chains in alkaline anion exchange membranes for fuel cells

Yuan Zhu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Improvement in the solid-state alkaline fuel cell performance through efficient water management strategies

Yuhei Oshiba et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Chemistry, Physical

The path towards sustainable energy

Steven Chu et al.

NATURE MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Hydroxide Solvation and Transport in Anion Exchange Membranes

Chen Chen et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Multidisciplinary Sciences

Nanocrack-regulated self-humidifying membranes

Chi Hoon Park et al.

NATURE (2016)

Add to Collection

Editorial Material Energy & Fuels

Operating flexibly

Young Moo Lee

NATURE ENERGY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Pt-Ru catalyzed hydrogen oxidation in alkaline media: oxophilic effect or electronic effect?

Ying Wang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Towards greener and more sustainable batteries for electrical energy storage

D. Larcher et al.

NATURE CHEMISTRY (2015)

Add to Collection

Article Polymer Science

Ion Transport by Nanochannels in Ion-Containing Aromatic Copolymers

Nanwen Li et al.

MACROMOLECULES (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Water Retention by Using Polymeric Microcapsules to Confer High Proton Conductivity on Membranes at Low Humidity

Jingtao Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2011)

Add to Collection

Article Engineering, Chemical

Mineral nanofibre reinforced composite polymer electrolyte membranes with enhanced water retention capability in PEM fuel cells

Feng Xu et al.

JOURNAL OF MEMBRANE SCIENCE (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Chain architecture dependence of pore morphologies and water diffusion in grafted and block polymer electrolyte fuel cell membranes

Gert Dorenbos et al.

ENERGY & ENVIRONMENTAL SCIENCE (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.