Synergistic regulation of dielectric-magnetic dual-loss and triple heterointerface polarization via magnetic MXene for high-performance electromagnetic wave absorption

Article Chemistry, Physical

Self-assembled multi-layered hexagonal-like MWCNTs/MnF2/CoO nanocomposite with enhanced electromagnetic wave absorption

Tingting Zheng et al.

Summary: The MWCNTs/MnF2/CoO composite material shows great potential in enhancing electromagnetic wave absorption performance by adjusting dielectric loss and increasing magnetic loss.

CARBON (2022)

Add to Collection

Article Materials Science, Composites

Synthesis of NiCo2-0.5xCr2O3@C nanoparticles based on hydroxide with the heterogeneous interface for excellent electromagnetic wave absorption properties

Lifu Sun et al.

Summary: The addition of Cr2O3 and NiCo alloy in porous carbon composites can optimize the impedance matching and greatly enhance the electromagnetic wave absorption performance.

COMPOSITES COMMUNICATIONS (2022)

Add to Collection

Article Engineering, Environmental

Layered 3D structure derived from MXene/magnetic carbon nanotubes for ultra-broadband electromagnetic wave absorption

Tianqi Hou et al.

Summary: The widespread use of communication equipment has led to the deterioration of the electromagnetic environment, necessitating the development of more efficient electromagnetic wave absorption materials. By modifying Ti3C2Tx MXene composites with magnetic NiCo/Carbon nanotubes (CNTs), the absorption of electromagnetic waves is achieved.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Materials Science, Multidisciplinary

A mini-review of MXene porous films: Preparation, mechanism and application

Yali Zhang et al.

Summary: This article reviews the research progress of MXene porous films in electromagnetic interference shielding, energy storage, and biomedical applications. It focuses on the preparation methods and pore-forming mechanisms, and highlights the key scientific and technical challenges that need to be addressed.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Intrinsic high thermal conductive liquid crystal epoxy film simultaneously combining with excellent intrinsic self-healing performance

Xutong Yang et al.

Summary: In this study, a side chain liquid crystal epoxy based on biphenyl mesomorphic unit was successfully synthesized, and a liquid crystal epoxy film with thermal conductivity and self-healing properties was prepared. The liquid crystal epoxy showed high thermal conductivity, excellent self-healing performance, wide service temperature range, and good thermal stability. It is expected to have wide application prospects in the fields of flexible electronic devices and intelligent structures.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Synthesis of 3D cerium oxide/porous carbon for enhanced electromagnetic wave absorption performance

Xinmeng Huang et al.

Summary: CeO2/porous carbon composites exhibit enhanced electromagnetic wave absorption performance compared to pure porous carbon materials, showing promising potential for application in dealing with electromagnetic interference and pollution.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Synergy of photocatalysis and photothermal effect in integrated 0D perovskite oxide/2D MXene heterostructures for simultaneous water purification and solar steam generation

Deqi Fan et al.

Summary: Inspired by plant transpiration and natural photosynthesis, bifunctional properties of mixed-dimensional Ti3C2Tx/MXene and La0.5Sr0.5CoO3/LSC nanohetero-structures were explored for degrading pollutants and producing fresh water simultaneously. Through the assembly of MXene/LSC hydrogels, high light-to-heat conversion efficiency and photodegradation efficiency were achieved, along with excellent water evaporation capacity for purifying brine and wastewater.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Add to Collection

Article Chemistry, Physical

Synthesis and microwave absorbing properties of N-doped carbon microsphere composites with concavo-convex surface

Jiqi Wang et al.

Summary: This paper reports on the preparation and performance evaluation of N-doped carbon microsphere composites with concavo-convex surfaces, showing excellent microwave absorbing properties at different frequencies for samples obtained by calcining at different temperatures.

CARBON (2021)

Add to Collection

Article Engineering, Environmental

Metal-organic framework-derived NiSe2-CoSe2@C/Ti3C2Tx composites as electromagnetic wave absorbers

Tianqi Hou et al.

Summary: Two-dimensional metal carbide or nitride materials are considered as a new class of electromagnetic wave absorbing materials due to their unique multilayer structure and metal-like properties. The NiSe2-CoSe2@C/Ti3C2Tx composites show high electromagnetic wave absorption performance and have potential applications.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Manufacturing

Novel flexible polyurethane/MXene composites with sensitive solar thermal energy storage behavior

Shang Gong et al.

Summary: The study developed flexible polyurethane/MXene solid-solid phase change materials with improved solar-to-thermal conversion efficiency and mechanical strength. The materials exhibited leakage-proof properties and excellent stability after thermal and light cycling tests, suggesting potential applications in solar thermal energy storage.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Engineering, Multidisciplinary

Two-dimensional interface engineering of NiS/MoS2/Ti3C2Tx heterostructures for promoting electromagnetic wave absorption capability

Ming Chang et al.

Summary: This study presents a novel NiS/MoS2/Ti3C2Tx hybrid system with a unique multilayer-scale structure, which exhibits excellent absorption performance through intense dielectric loss and multiple reflection, achieving wide effective absorption bandwidth and minimal reflection loss.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Improvement of thermal conductivities and simulation model for glass fabrics reinforced epoxy laminated composites via introducing hetero-structured BNN-30@BNNS fillers

Xuetao Shi et al.

Summary: Hetero-structured thermally conductive boron nitride and boron nitride nanosheets fillers were prepared by electrostatic self-assembly method and used to fabricate thermally conductive & electrically insulating laminated composites. These fillers showed significant improvement in thermal conductivity of epoxy composites and led to enhanced heat transfer efficiency.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

Mechanical wear behavior between CeO2(100), CeO2(110), CeO2(111), and silicon studied through atomic force microscopy

Lile Xie et al.

Summary: By using atomic force microscopy and scanning electron microscopy, the study investigates the mechanical removal mechanism of silicon with different exposure surfaces of cerium oxide (CeO2). It is found that the main type of mechanical wear between Si and CeO2 is adhesive wear. The relationship between silicon removal rate, friction force, and ceria wear rate with different crystallographic orientations of CeO2 is also explored.

TRIBOLOGY INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Novel magnetic silicate composite for lightweight and efficient electromagnetic wave absorption

Di Lan et al.

Summary: Silicates with double shell hollow sphere morphology were prepared using ultra-high temperature calcination and hydrothermal methods, and applied in electromagnetic wave absorption. The iron-based silicate materials showed excellent electromagnetic wave absorption performance with a wide absorption bandwidth, making them promising for various applications in this field.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Superior anti-corrosion and self-healing bi-functional polymer composite coatings with polydopamine modified mesoporous silica/graphene oxide

Yanqi Ma et al.

Summary: In this study, graphene oxide and benzotriazole-loaded mesoporous silica nanoparticles were combined through in situ polymerization of polydopamine to prepare a self-healing bi-functional graphene oxide for enhancing the anti-corrosion properties of waterborne epoxy coatings. The new nanofillers demonstrated significantly improved corrosion resistance and self-healing capabilities for the coatings.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High Concentration of Ti3C2Tx MXene in Organic Solvent

Qingxiao Zhang et al.

Summary: MXenes are widely studied as two-dimensional materials due to their properties, but dispersing MXene materials in organic solvents poses a significant challenge. The tuned microenvironment method (TMM) has been developed to prepare highly concentrated Ti3C2Tx organic solvent dispersion efficiently. The method allows for clean, uniform, and large-size Ti3C2Tx nanosheets to be dispersed in organic solvents with excellent oxidation resistance.

ACS NANO (2021)

Add to Collection

Article Chemistry, Physical

Improved synergistic effect for achieving ultrathin microwave absorber of 1D Co nanochains/2D carbide MXene nanocomposite

Fei Pan et al.

Summary: A multilayer-sandwiched Ti3C2Tx MXene heterostructure decorated with one-dimensional Co nanochains was successfully synthesized through a facile in situ process, realizing electromagnetic wave absorbers with ultrathin matching thickness and excellent absorbing capability. The MXene/Co nanochains composites achieved a minimum reflection loss of -46.48 dB with an ultrathin matching thickness of only 1.02 mm at 16.75 GHz, with the absorption mechanism involving conductive loss, polarization loss, magnetic loss, and interlacing magnetic flux field effect.

CARBON (2021)

Add to Collection

Article Chemistry, Physical

Design and synthesis of NiCo/Co4S3@C hybrid material with tunable and efficient electromagnetic absorption

Tianqi Hou et al.

Summary: A novel carbon-coated NiCo alloy/Co4S3 hybrid material was fabricated in this study, with improved electromagnetic wave absorption properties achieved by adjusting the annealing temperature. The results suggest that the hybrid material has potential applications as an electromagnetic wave absorber.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Design of Ti3C2Tx/TiO2/PANI multi-layer composites for excellent electromagnetic wave absorption performance

Xuran Gao et al.

Summary: The Ti3C2Tx/TiO2/PANI composites exhibit excellent electromagnetic wave absorption properties with strong reflection loss, thin thickness, and wide absorption bandwidth, making them promising candidates for EMW absorbers.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Ultrathin, Lightweight, and Flexible CNT Buckypaper Enhanced Using MXenes for Electromagnetic Interference Shielding

Rongliang Yang et al.

Summary: In this study, an ultrathin, lightweight, and flexible carbon nanotube (CNT) buckypaper enhanced with MXenes (Ti3C2Tx) was successfully synthesized using a simple electrophoretic deposition process, demonstrating outstanding EMI shielding effectiveness for application in electronic devices and wireless communications.

NANO-MICRO LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Synthesis of CF@PANI hybrid nanocomposites decorated with Fe3O4 nanoparticles towards excellent lightweight microwave absorber

Meng Zhang et al.

Summary: A lightweight hybrid nanocomposite with remarkable microwave absorption properties was successfully synthesized in this study, showing great potential for practical applications in the frequency range of 2-18 GHz.

CARBON (2021)

Add to Collection

Article Optics

Hybrid metamaterial absorber for ultra-low and dual-broadband absorption

Cheng Zhang et al.

Summary: This study introduces a hybrid metamaterial absorber composed of graphene films and conventional magnetic absorbing materials, designed for wideband absorption performance at ultra-low frequencies. Experimental results validate the effectiveness of the design method, highlighting its lightweight and environmentally adaptable engineering value.

OPTICS EXPRESS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Achieving Concurrent High Energy Density and Efficiency in All-Polymer Layered Paraelectric/Ferroelectric Composites via Introducing a Moderate Layer

Shengbiao Sun et al.

Summary: Dielectric polymer capacitors are widely used in advanced electronics due to their high power density, but achieving high energy density and discharge efficiency remains a challenge. A novel all-polymer trilayer structure is proposed to address this issue by combining different polymers with specific properties to optimize the electric field distribution, resulting in significantly improved breakdown strength, energy density, efficiency, and cycling stability.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Fabrication of binary MOF-derived hybrid nanoflowers via selective assembly and their microwave absorbing properties

Fei Wu et al.

Summary: This study focuses on constructing two binary hybrid MOF heterostructures through selective assembly strategies, converting them into magnetic porous carbon materials, and investigating their microwave absorption properties. The products exhibit superior microwave absorption performance with hierarchical pore structures, optimal impedance matching, and excellent electromagnetic attenuation capabilities.

CARBON (2021)

Add to Collection

Article Engineering, Multidisciplinary

Fabrication of ultralight helical porous carbon fibers with CNTs-confined Ni nanoparticles for enhanced microwave absorption

Fei Wu et al.

Summary: The ultralight magnetic helical porous carbon fibers (MHPFs) fabricated using catalytic self-deposition (CSD) technology exhibit exceptional microwave absorption performance, with a large absorption bandwidth and strong reflection loss.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Electromagnetic wave absorption performance of Ti2O3 and vacancy enhancement effective bandwidth

Xiankai Fu et al.

Summary: The microwave absorption properties of Ti2O3 were studied, revealing that Ti2O3 with vacancy defects has a wider effective absorption bandwidth possibly due to changes in the electric dipole state caused by the defects.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Multifunctional HDPE/CNTs/PW composite phase change materials with excellent thermal and electrical conductivities

Xiaolong Li et al.

Summary: By fabricating HDPE/CNTs porous scaffolds and HDPE/CNTs/PW composite PCMs, the thermal conductivity of PCMs was significantly improved, leading to high phase change enthalpy. These materials show promising potential in the application of light-to-thermal conversion, electro-to-thermal conversion, and thermal energy storage.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Construction of 1D Heterostructure NiCo@C/ZnO Nanorod with Enhanced Microwave Absorption

Jianwei Wang et al.

Summary: The study designed NiCo-LDHs@ZnO nanorods and derived NiCo@C/ZnO composites through heat treating, achieving excellent electromagnetic wave absorption performance with outstanding dielectric and magnetic losses synergy.

NANO-MICRO LETTERS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

3D Seed-Germination-Like MXene with In Situ Growing CNTs/Ni Heterojunction for Enhanced Microwave Absorption via Polarization and Magnetization

Xiao Li et al.

Summary: This study addresses the issue of lacking magnetic loss capability in pure MXene by fabricating a magnetic CNTs/Ni heterostructure decorated MXene substrate. This hybrid structure shows superior microwave absorption performance due to improved impedance matching conditions. The distinctive 3D architecture of the MXene-CNTs/Ni hybrid enhances magnetic loss and polarization capabilities, showcasing novel ideas for developing magnetic MXene-based absorbers.

NANO-MICRO LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Engineering defects in 2D g-C3N4 for wideband, efficient electromagnetic absorption at elevated temperature

Hualiang Lv et al.

Summary: This study demonstrates that doping phosphorus and sulfur atoms into nanoporous g-C3N4 can significantly enhance its electromagnetic absorption performance over a wide frequency range, especially at high temperatures.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Engineering, Environmental

Novel binary cobalt nickel oxide hollowed-out spheres for electromagnetic absorption applications

Di Lan et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Manufacturing

Interlayer controllable of hierarchical MWCNTs@C@FexOy cross-linked composite with wideband electromagnetic absorption performance

Guanglei Wu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Banana Leaflike C-Doped MoS2 Aerogels toward Excellent Microwave Absorption Performance

Jin-Bo Cheng et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Flexible, Transparent, and Conductive Ti3C2Tx MXene-Silver Nanowire Films with Smart Acoustic Sensitivity for High-Performance Electromagnetic Interference Shielding

Wei Chen et al.

ACS NANO (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Sandwich-Like Fe&TiO2@C Nanocomposites Derived from MXene/Fe-MOFs Hybrids for Electromagnetic Absorption

Baiwen Deng et al.

NANO-MICRO LETTERS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Highly sensitive, robust and anisotropic MXene aerogels for efficient broadband microwave absorption

Yang Dai et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Materials Science, Composites

Self-etching template method to synthesize hollow dodecahedral carbon capsules embedded with Ni-Co alloy for high-performance electromagnetic microwave absorption

Hongfang Qiu et al.

COMPOSITES COMMUNICATIONS (2020)

Add to Collection

Article Engineering, Multidisciplinary

In situ deposition of pitaya-like Fe3O4@C magnetic microspheres on reduced graphene oxide nanosheets for electromagnetic wave absorber

Hongxia Zhang et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Engineering, Multidisciplinary

Exceptionally porous three-dimensional architectural nanostructure derived from CNTs/graphene aerogel towards the ultra-wideband EM absorption

Hualiang Lv et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

MOF-Derived Ni1-xCox@Carbon with Tunable Nano-Microstructure as Lightweight and Highly Efficient Electromagnetic Wave Absorber

Lei Wang et al.

NANO-MICRO LETTERS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Lightweight and robust rGO/sugarcane derived hybrid carbon foams with outstanding EMI shielding performance

Lei Wang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Investigation and optimization of Fe/ZnFe2O4 as a Wide-band electromagnetic absorber

Guanglei Wu et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Permittivity-Regulating Strategy Enabling Superior Electromagnetic Wave Absorption of Lithium Aluminum Silicate/rGO Nanocomposites

Siru Lu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Engineering, Environmental

Preparation and electromagnetic wave absorption performance of Fe3Si/SiC@SiO2 nanocomposites

Meng Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Promising Ti3C2Tx MXene/Ni Chain Hybrid with Excellent Electromagnetic Wave Absorption and Shielding Capacity

Luyang Liang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Physical

Layered NiCo alloy nanoparticles/nanoporous carbon composites derived from bimetallic MOFs with enhanced electromagnetic wave absorption performance

Juan Xiong et al.

CARBON (2019)

Add to Collection

Article Engineering, Multidisciplinary

Mesoporous carbon hollow microspheres with tunable pore size and shell thickness as efficient electromagnetic wave absorbers

Hongxia Zhang et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Engineering, Manufacturing

3D Ti3C2Tx MXene/C hybrid foam/epoxy nanocomposites with superior electromagnetic interference shielding performances and robust mechanical properties

Lei Wang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Article Engineering, Multidisciplinary

Electrostatic self-assembly synthesis of ZnFe2O4 quantum dots (ZnFe2O4@C) and electromagnetic microwave absorption

Zhenguo Gao et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Materials Science, Composites

Properties of two-dimensional Ti3C2 MXene/thermoplastic polyurethane nanocomposites with effective reinforcement via melt blending

Xinxin Sheng et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Engineering, Multidisciplinary

Laminated microwave absorbers of A-site cation deficiency perovskite La0.8FeO3 doped at hybrid RGO carbon

Zirui Jia et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Materials Science, Composites

Facile synthesis of cobalt-zinc ferrite microspheres decorated nitrogen-doped multi-walled carbon nanotubes hybrid composites with excellent microwave absorption in the X-band

Ruiwen Shu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Oxygen vacancy defects enhanced electromagnetic wave absorption properties of 3D net-like multi-walled carbon nanotubes/cerium oxide nanocomposites

Yue Wu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

Deep insights into the exfoliation properties of MAX to MXenes and the hydrogen evolution performances of 2D MXenes

Yuwen Cheng et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Engineering, Environmental

Design of carbon sphere/magnetic quantum dots with tunable phase compositions and boost dielectric loss behavior

Guanglei Wu et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Graphene nanohybrids: excellent electromagnetic properties for the absorbing and shielding of electromagnetic waves

Maosheng Cao et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Add to Collection

Article Chemistry, Physical

Carbon nanofiber mats for electromagnetic interference shielding

Xinghua Hong et al.

CARBON (2017)

Add to Collection

Article Chemistry, Physical

Synthesis and microwave absorption properties of FeCo nanoplates

Yong Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

Add to Collection

Synergistic regulation of dielectric-magnetic dual-loss and triple heterointerface polarization via magnetic MXene for high-performance electromagnetic wave absorption

Related references

Export Citation

Share Paper