Related references
Note: Only part of the references are listed.Corrosion and passivation behavior of laser powder bed fusion produced Ti-6Al-4V in static/dynamic NaCl solutions with different concentrations
P. Qin et al.
CORROSION SCIENCE (2021)
Microstructural homogeneity and mechanical behavior of a selective laser melted Ti-35Nb alloy produced from an elemental powder mixture
Jincheng Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Corrosion behavior and mechanism of selective laser melted Ti35Nb alloy produced using pre-alloyed and mixed powder in Hank's solution
P. Qin et al.
CORROSION SCIENCE (2021)
Tailoring deformation and superelastic behaviors of beta-type Ti-Nb-Mn-Sn alloys
S. F. Jawed et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
In situ fabrication of a titanium-niobium alloy with tailored microstructures, enhanced mechanical properties and biocompatibility by using selective laser melting
Danlei Zhao et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Formation of scanning tracks during Selective Laser Melting (SLM) of pure tungsten powder: Morphology, geometric features and forming mechanisms
Meng Guo et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Selective laser melting of Ti-35Nb composite from elemental powder mixture: Microstructure, mechanical behavior and corrosion behavior
J. C. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Improved trade-off between strength and plasticity in titanium based metastable beta type Ti-Zr-Fe-Sn alloys
C. D. Rabadia et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Influence of Heat Treatments on Microstructure and Mechanical Properties of Ti-26Nb Alloy Elaborated In Situ by Laser Additive Manufacturing with Ti and Nb Mixed Powder
Jing Wei et al.
MATERIALS (2019)
Novel insight into the formation of α-martensite and ω-phase with cluster structure in metastable Ti-Mo alloys
Mingjia Li et al.
ACTA MATERIALIA (2019)
omega phase acts as a switch between dislocation channeling and joint twinning- and transformation-induced plasticity in a metastable beta titanium alloy
M. J. Lai et al.
ACTA MATERIALIA (2018)
Metallurgical properties and biomimetic HA deposition performance of Ti-Nb PIM alloys
Eren Yilmaz et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Development of a coaxial extrusion deposition for 3D printing of customizable pectin-based food simulant
Valerie Vancauwenberghe et al.
JOURNAL OF FOOD ENGINEERING (2018)
3D printing of hydroxyapatite scaffolds with good mechanical and biocompatible properties by digital light processing
Yong Zeng et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Deformation mechanism and mechanical properties of a thermomechanically processed beta Ti-28Nb-35.4Zr alloy
Sertan Ozan et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Isolated and modulated effects of topology and material type on the mechanical properties of additively manufactured porous biomaterials
R. Hedayati et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Effect of laser power on oxygen and nitrogen concentration of commercially pure titanium manufactured by selective laser melting
Tae-Wook Na et al.
MATERIALS CHARACTERIZATION (2018)
The potential of 3D printing in urological research and patient care
Marc Colaco et al.
NATURE REVIEWS UROLOGY (2018)
Additive manufacturing of biomaterials
Susmita Bose et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Early plastic deformation behaviour and energy absorption in porous beta-type biomedical titanium produced by selective laser melting
Y. J. Liu et al.
SCRIPTA MATERIALIA (2018)
Segregation mediated heterogeneous structure in a metastable β titanium alloy with a superior combination of strength and ductility
Junheng Gao et al.
SCIENTIFIC REPORTS (2018)
Improved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
Peng Qin et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
Improved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
Peng Qin et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
Electrochemical behaviour of laser solid formed Ti-6Al-4V alloy in a highly concentrated NaCl solution
Jiaqiang Li et al.
CORROSION SCIENCE (2018)
Improved fatigue properties with maintaining low Young's modulus achieved in biomedical beta-type titanium alloy by oxygen addition
Huihong Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
Effect of deformation on the microstructure, transformation temperature and superelasticity of Ti-23 at% Nb shape-memory alloys
Abdollah Bahador et al.
MATERIALS & DESIGN (2017)
Effect of Nb content on microstructure, property and in vitro apatite-forming capability of Ti-Nb alloys fabricated via selective laser melting
Qian Wang et al.
MATERIALS & DESIGN (2017)
A closer look at the in vitro electrochemical characterisation of titanium alloys for biomedical applications using in-situ methods
J. -L. Wang et al.
ACTA BIOMATERIALIA (2017)
Compressive and fatigue behavior of beta-type titanium porous structures fabricated by electron beam melting
Y. J. Liu et al.
ACTA MATERIALIA (2017)
Additively Manufactured and Surface Biofunctionalized Porous Nitinol
Z. Gorgin Karaji et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting
Y. J. Liu et al.
ACTA MATERIALIA (2016)
Strain rate dependence of deformation-induced transformation and twinning in a metastable titanium alloy
Mansur Ahmed et al.
ACTA MATERIALIA (2016)
Selective laser melting of titanium alloy with 50 wt% tantalum: Microstructure and mechanical properties
Swee Leong Sing et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
In situ elaboration of a binary Ti-26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders
M. Fischer et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Corrosion behaviour and surface modification of the β-type biomedical Ti-24Nb-4Zr-8Sn alloys
Yun Bai et al.
MATERIALS TECHNOLOGY (2016)
Porosity content control of CoCrMo and titanium parts by Taguchi method applied to selective laser melting process parameter
David Joguet et al.
RAPID PROTOTYPING JOURNAL (2016)
Role of oxygen atoms in α martensite of Ti-20 at.% Nb alloy
Masaki Tahara et al.
SCRIPTA MATERIALIA (2016)
Combinatorial development of antibacterial Zr-Cu-Al-Ag thin film metallic glasses
Yanhui Liu et al.
SCIENTIFIC REPORTS (2016)
Development of Ti-Nb-Zr alloys with high elastic admissible strain for temporary orthopedic devices
Sertan Ozan et al.
ACTA BIOMATERIALIA (2015)
3D-imaging of selective laser melting defects in a Co-Cr-Mo alloy by synchrotron radiation micro-CT
Xin Zhou et al.
ACTA MATERIALIA (2015)
On the role of melt flow into the surface structure and porosity development during selective laser melting
Chunlei Qiu et al.
ACTA MATERIALIA (2015)
Influence of Si addition on the microstructure and mechanical properties of Ti-35Nb alloy for applications in orthopedic implants
A. M. G. Tavares et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
3D printing in aerospace and its long-term sustainability
Sunil C. Joshi et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2015)
Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting
B. Vrancken et al.
ACTA MATERIALIA (2014)
Effect of Fluid Convection on Dendrite Arm Spacing in Laser Deposition
Yousub Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2014)
Review of effect of oxygen on room temperature ductility of titanium and titanium alloys
M. Yan et al.
POWDER METALLURGY (2014)
Fatigue behavior of porous biomaterials manufactured using selective laser melting
S. Amin Yavari et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Production of Porous β-Type Ti-40Nb Alloy for Biomedical Applications: Comparison of Selective Laser Melting and Hot Pressing
Ksenia Zhuravleva et al.
MATERIALS (2013)
Microstructure and mechanical behavior of superelastic Ti-24Nb-0.50 and Ti-24Nb-0.5N biomedical alloys
A. Ramarolahy et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2012)
Effects of alloying elements on the cytotoxic response of titanium alloys
Alessandra Cremasco et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2011)
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti-24Nb-4Zr-8Sn alloy
L. C. Zhang et al.
SCRIPTA MATERIALIA (2011)
Shape memory properties of Ti-Nb-Mo biomedical alloys
Y. Al-Zain et al.
ACTA MATERIALIA (2010)
Effects of processing parameters on consolidation and microstructure of W-Cu components by DMLS
Dongdong Gu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Structure of orthorhombic martensitic phase in binary Ti-Nb alloys
S. Banumathy et al.
JOURNAL OF APPLIED PHYSICS (2009)
Evaluation of the volume fraction of nanocrystals devitrified in Al-based amorphous alloys
H. W. Yang et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2009)
Prediction of the martensite start temperature for β titanium alloys as a function of composition
Suresh Neelakantan et al.
SCRIPTA MATERIALIA (2009)
Fatigue properties of a metastable β-type titanium alloy with reversible phase transformation
S. J. Li et al.
ACTA BIOMATERIALIA (2008)
Microstructure and mechanical properties of a high nitrogen titanium alloy
Tomohiro Ando et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Titanium alloys for biomedical applications
H. J. Rack et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2006)
Martensitic transformation, shape memory effect and superelasticity of Ti-Nb binary alloys
H. Y. Kim et al.
ACTA MATERIALIA (2006)
Biocompatibility of β-stabilizing elements of titanium alloys
E Eisenbarth et al.
BIOMATERIALS (2004)
Physical aspects of process control in selective laser sintering of metals
S Das
ADVANCED ENGINEERING MATERIALS (2003)
Non-contact measurements of surface tension and viscosity of niobium, zirconium, and titanium using an electrostatic levitation furnace
PF Paradis et al.
INTERNATIONAL JOURNAL OF THERMOPHYSICS (2002)
Share Paper
