Related references
Note: Only part of the references are listed.Microstructure evolution and performances of Al-0.7Mg-0.6Si-0.2Ce-X (X=Sc, Y and Zr) alloys with high strength and high electrical conductivity
Weiyi Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
High-strength and high-conductivity in situ Cu-TiB2 nanocomposites
Shuaihang Pan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Zn-Mg-WC Nanocomposites for Bioresorbable Cardiovascular Stents: Microstructure, Mechanical Properties, Fatigue, Shelf Life, and Corrosion
Zeyi Guan et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2022)
Metal matrix nanocomposites in tribology: Manufacturing, performance, and mechanisms
Shuaihang Pan et al.
FRICTION (2022)
High Strength and High Electrical Conductivity Al Nanocomposites for DC Transmission Cable Applications
Abdolreza Javadi et al.
JOURNAL OF COMPOSITES SCIENCE (2021)
TiB2 nanoparticles-regulated oxidation behavior in aluminum alloy 7075
Shuaihang Pan et al.
CORROSION SCIENCE (2021)
A novel process for manufacturing copper with size-controlled in-situ tungsten nanoparticles by casting
Gongcheng Yao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Effect of heat treatment on SLM-fabricated TiN/AlSi10Mg composites: Microstructural evolution and mechanical properties
C. Gao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Mo-enhanced chemical stability of TiC nanoparticles in molten Al
Shuaihang Pan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Properties and precipitates of the high strength and electrical conductivity Cu-Ni-Co-Si-Cr alloy
Yijie Ban et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Understanding alloying behaviors of Sc, Ni and Zn additions on Al/TiB2 interfaces based on interfacial characteristics and solute properties
Qian Wang et al.
SURFACES AND INTERFACES (2021)
Nanoprecipitates induced dislocation pinning and multiplication strategy for designing high strength, plasticity and conductivity Cu alloys
Huiya Yang et al.
SCRIPTA MATERIALIA (2021)
Plasma assisted milling treatment for improving mechanical and electrical properties of in-situ grown graphene/copper composites
Zhilei Dong et al.
COMPOSITES COMMUNICATIONS (2021)
Hybridization effect of BN and Al2O3 nanoparticles on the physical, wear, and electrical properties of aluminum AA1060 nanocomposites
Essam B. Moustafa
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2021)
Tribological characteristics of AA8090-WC-ZrC metal matrix composites prepared by stir casting process for aerospace applications
A. Kalaiyarasan et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2021)
Interfacial thermal conductance of in situ aluminum-matrix nanocomposites
Shuaihang Pan et al.
JOURNAL OF MATERIALS SCIENCE (2021)
Effect of cold drawing strain on the microstructure, mechanical properties and electrical conductivity of low-oxygen copper wires
Fei Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Nanoparticle promoted solution treatment by reducing segregation in AA7034
Jie Yuan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Tribological characteristics of AA8090-WC-ZrC metal matrix composites prepared by stir casting process for aerospace applications
A. Kalaiyarasan et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2021)
Structural, mechanical and tribological properties of Cu-ZrO2/GNPs hybrid nanocomposites
A. M. Sadoun et al.
CERAMICS INTERNATIONAL (2020)
Effect of Al2O3 particles on mechanical and tribological properties of Al-Mg dual-matrix nanocomposites
M. A. Eltaher et al.
CERAMICS INTERNATIONAL (2020)
Preparation of high strength graphene reinforced Cu-based nanocomposites via mechanical alloying method: microstructural, mechanical and electrical properties
Essam B. Moustafa et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2020)
Effect of electron concentration on electrical conductivity in in situ Al-TiB2 nanocomposites
Shuaihang Pan et al.
APPLIED PHYSICS LETTERS (2020)
Effects of nanosized TiC and TiB2 particles on the corrosion behavior of Al-Mg-Si alloy
Run Geng et al.
CORROSION SCIENCE (2020)
Towards sustainable copper matrix composites: Manufacturing routes with structural, mechanical, electrical and corrosion behaviour
Anbesh Jamwal et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Preparation of CNTs/Cu composites with good electrical conductivity and excellent mechanical properties
Shaoli Fu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Enhanced tensile properties and electrical conductivity of Cu-CNT nanocomposites processed via the combination of flake powder metallurgy and high pressure torsion methods
M. R. Akbarpour et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Insight into Si poisoning on grain refinement of Al-Si/Al-5Ti-B system
Yang Li et al.
ACTA MATERIALIA (2020)
Mechanical, tribological and electrical properties of ZrB2 reinforced Cu processed via milling and high-pressure hot pressing
Mahammad Ali Shaik et al.
CERAMICS INTERNATIONAL (2020)
Recent researches of the bio-inspired nano-carbon reinforced metal matrix composites
Rui Shu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Synchronous Electrical Conductance- and Electron Tunnelling-Scanning Electrochemical Microscopy Measurements
James F. Edmondson et al.
CHEMELECTROCHEM (2020)
Microstructure and properties of W-25 wt% Cu composites reinforced with tungsten carbide produced by an in situ reaction
Qiao Zhang et al.
VACUUM (2020)
Structural Features and Functional Properties of Y2O3 Reinforced Nickel Matrix Nanocomposites
Alok Kumar Chaudhari et al.
CHEMISTRYSELECT (2020)
An overview of graphene and its derivatives reinforced metal matrix composites: Preparation, properties and applications
Zhanyong Zhao et al.
CARBON (2020)
Facile manufacturing of bimodal grained copper with nanoparticles
Gongcheng Yao et al.
MATERIALS LETTERS (2020)
Mechanical, tribological and corrosion physiognomies of CNT-Al metal matrix composite (MMC) coatings deposited by cold gas dynamic spray (CGDS) process
Yingpeng Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Effect of Morphology and Structure of MWCNTs on Metal Matrix Nanocomposites
Iris Carneiro et al.
MATERIALS (2020)
Reversion and re-aging of a peak aged Al-Zn-Mg-Cu alloy
Huan Zhao et al.
SCRIPTA MATERIALIA (2020)
Effect of ZrO2 content on properties of Cu-ZrO2 nanocomposites synthesized by optimized high energy ball milling
A. Fathy et al.
CERAMICS INTERNATIONAL (2019)
Porous Y2O3 fiber-reinforced silver composite exhibiting enhanced mechanical and electrical properties
Rui Yang et al.
CERAMICS INTERNATIONAL (2019)
Enhanced mechanical and electrical properties of super-aligned carbon nanotubes reinforced copper by severe plastic deformation
Lunqiao Xiong et al.
COMPOSITES PART B-ENGINEERING (2019)
Mechanochemical processing of Cu-Y2O3 alloy by MA-HIP for heat sink materials application
Bo Huang et al.
FUSION ENGINEERING AND DESIGN (2019)
Mechanical and electrical properties of copper-graphene nanocomposite fabricated by high pressure torsion
Nidhi Khobragade et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Enhanced mechanical and electrical properties of novel graphene reinforced copper matrix composites
C. Salvo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Preparation and electrical conductivity of graphitic carbon-infused copper alloys
B. Ma et al.
MRS COMMUNICATIONS (2019)
Tribological Behaviour of Al6061-2SiC-xGr Hybrid Metal Matrix Nanocomposites Fabricated through Ultrasonically Assisted Stir Casting Technique
A. Prasad Reddy et al.
SILICON (2019)
An investigation on tribological and electrical behaviour of conventional and microwave processed copper-graphite composites
C. Ayyappadas et al.
MATERIALS RESEARCH EXPRESS (2019)
Different time's Nd:YAG laser-irradiated PVA/Ag nanocomposites: structural, optical, and electrical characterization
Islam Shukri Elashmawi et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Microstructure and Properties of W-30 wt.% Cu Composites Reinforced with WC Particles Prepared by Vapor Deposition Carbonization
Qiao Zhang et al.
JOM (2019)
Fabrication, mechanical properties and electrical conductivity of Al2O3 reinforced Cu/CNTs composites
Yu Pan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Facile fabrication and enhanced properties of Cu-40 wt% Zn/WC nanocomposite
Shuaihang Pan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Enhancing the oxidation resistance and electrical conductivity of alumina reinforced copper-based composites via introducing Ag and annealing treatment
Xiyi Zhou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Microstructure and tribological behavior of interfaces in Cu-SiO2 and Cu-Cr metal matrix composites
Taimin Gong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Strength and electrical conductivity behavior of nanoparticles reaction on new alumina dispersion-strengthened copper alloy
Yabo Fu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of GNPs coated Ag on microstructure and mechanical properties of Cu-Fe dual-matrix nanocomposite
Ahmed Abu-Oqail et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Direct synthesis of high-quality graphene on Cu powders from adsorption of small aromatic hydrocarbons: A route to high strength and electrical conductivity for graphene/Cu composite
Miao Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Interfacial reaction induced efficient load transfer in few-layer graphene reinforced Al matrix composites for high-performance conductor
Weiwei Zhou et al.
COMPOSITES PART B-ENGINEERING (2019)
The improvement of electrical conductivity of hypoeutectic Al-Si alloys achieved by composite melt treatment
Xiaoli Cui et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Long-term ball milling and hot pressing of in-situ nanoscale tungsten carbides reinforced copper composite and its characterization
Jian Li et al.
MATERIALS CHARACTERIZATION (2019)
Nanostructured 1% silver-copper composite wires with a high tensile strength and a high electrical conductivity
Simon Tardieu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Investigation of the effect of boron carbide nanoparticles on the structural, electrical and mechanical properties of Al-B4C nanocomposites
Mohammad Javad Nasr Isfahani et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Microstructure evolution, electrical conductivity and mechanical properties of dual-scale Cu5Zr/ZrB2 particulate reinforced copper matrix composites
Siruo Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Assessment of mechanical and tribological characteristics of Silicon Nitride reinforced aluminum metal matrix composites
G. B. Veeresh Kumar et al.
COMPOSITES PART B-ENGINEERING (2019)
Effect of reduced graphene oxide nanoplatelets content on the mechanical and electrical properties of copper matrix composite
Hamed Asgharzadeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Enhanced mechanical properties and electrical conductivity of graphene nanoplatelets/Cu composites by in situ formation of Mo2C nanoparticles
Siyuan Guo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Fundamental theories and basic principles of triboelectric effect: A review
Shuaihang Pan et al.
FRICTION (2019)
Enhanced properties of carbon nanotube-graphite hybrid-reinforced Cu matrix composites via optimization of the preparation technology and interface structure
Qi Zhao et al.
POWDER TECHNOLOGY (2019)
Effects of ZrO2 crystal structure on the tribological properties of copper metal matrix composites
Haibin Zhou et al.
TRIBOLOGY INTERNATIONAL (2019)
Effect of SiC content on microstructure, mechanical and electrical properties of sintered Al-20Si-xSiC nanocomposites fabricated by mechanical alloying
M. F. Zawrah et al.
MATERIALS RESEARCH EXPRESS (2019)
Enhanced thermal stability in Cu-40 wt% Zn/WC nanocomposite
Shuaihang Pan et al.
MATERIALS & DESIGN (2019)
Design of TiCx nanoparticles and their morphology manipulating mechanisms by stoichiometric ratios: Experiment and first-principle calculation
Bai-Xin Dong et al.
MATERIALS & DESIGN (2019)
Study on electrical behaviour of copper and its alloys containing dispersed nanoparticles
Shuaihang Pan et al.
CURRENT APPLIED PHYSICS (2019)
Electrical conductivity, mechanical strength and corrosion characteristics of spark plasma sintered Al-Nb nanocomposite
C. O. Ujah et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Structural, Mechanical, and Electrical Behavior of Ceramic-Reinforced Copper Metal Matrix Hybrid Composites
Manvandra Kumar Singh et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
High-performance copper reinforced with dispersed nanoparticles
Gongcheng Yao et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Three principles for preparing Al wire with high strength and high electrical conductivity
J. P. Hou et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
The Impact of Particle Reinforcement with Al2O3, TiB2, and TiC and Severe Plastic Deformation Treatment on the Combination of Strength and Electrical Conductivity of Pure Aluminum
Ilya A. Zhukov et al.
METALS (2019)
A Novel Approach to Enhance the Mechanical Strength and Electrical and Thermal Conductivity of Cu-GNP Nanocomposites
Abdollah Saboori et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Shock engineering the additive manufactured graphene-metal nanocomposite with high density nanotwins and dislocations for ultra-stable mechanical properties
Dong Lin et al.
ACTA MATERIALIA (2018)
Residual stress and microstructure effects on mechanical, tribological and electrical properties of TiN coatings on 304 stainless steel
Yeting Xi et al.
CERAMICS INTERNATIONAL (2018)
Microstructure and thermal behavior of diamond/Cu composites: Effects of surface modification
Chun Zhang et al.
DIAMOND AND RELATED MATERIALS (2018)
Bulk Cu-NbC nanocomposites with high strength and high electrical conductivity
Wei Zeng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
A study on the CNTs-Ag composites prepared based on spark plasma sintering and improved electroless plating assisted by ultrasonic spray atomization
Qi Zhao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Manufacturing of high strength aluminium composites reinforced with nano tungsten particles for electrical application and investigation on in-situ reaction during processing
Saurabh Dixit et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Microstructure and properties of a nanocrystalline Cu-Al-NbC composite with high strength and good conductivity
Jingwen Xie et al.
MATERIALS LETTERS (2018)
Effect of grain size on low-temperature electrical resistivity and thermal conductivity of pure magnesium
Xin Tong et al.
MATERIALS LETTERS (2018)
Selection of grain-boundary segregation elements for achieving stable and strong nanocrystalline Mg
X. C. Cai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Hydraulically amplified self-healing electrostatic actuators with muscle-like performance
E. Acome et al.
SCIENCE (2018)
Strengthening of Al-Fe3Al composites by the generation of harmonic structures
R. N. Shahid et al.
SCIENTIFIC REPORTS (2018)
An Overview of Metal Matrix Nanocomposites Reinforced with Graphene Nanoplatelets; Mechanical, Electrical and Thermophysical Properties
Abdollah Saboori et al.
METALS (2018)
Microstructure, mechanical and electrical characterization of zirconia reinforced copper based surface composite by friction stir processing
Harikishor Kumar et al.
MATERIALS RESEARCH EXPRESS (2018)
Processing, structure and thermal conductivity correlation in carbon fibre reinforced aluminium metal matrix composites
Alberto Torres Miranda et al.
MATERIALS & DESIGN (2018)
Breaking the trade-off relation of strength and electrical conductivity in pure Al wire by controlling texture and grain boundary
J. P. Hou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Monitoring of the central blood pressure waveform via a conformal ultrasonic device
Chonghe Wang et al.
NATURE BIOMEDICAL ENGINEERING (2018)
An investigation on dry sliding wear behaviour of AA6061-AlNp composite
Mahesh K. Naidu et al.
INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS, MECHANICAL AND CIVIL ENGINEERING (2018)
EFFECT OF GRAIN BOUNDARIES ON THE ELECTRON WORK FUNCTION OF ULTRAFINE GRAINED ALUMINUM
T. S. Orlova et al.
REVIEWS ON ADVANCED MATERIALS SCIENCE (2018)
Scalable Manufacturing of AgCu40(wt%)-WC Nanocomposite Microwires
Zeyi Guan et al.
JOURNAL OF MICRO AND NANO-MANUFACTURING (2018)
Effect of the Matrix and Reinforcement Sizes on the Microstructure, the Physical and Mechanical Properties of Al-SiC Composites
M. A. Salem et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2017)
Effect of silicon content on microstructure, mechanical and electrical properties of the directionally solidified Al-based quaternary alloys
Emin Cadirli et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Mechanical, electrical, and corrosion behavior of AA6063/TiC composites synthesized via stir casting route
Sekar Saravanan et al.
JOURNAL OF MATERIALS RESEARCH (2017)
Superparamagnetic enhancement of thermoelectric performance
Wenyu Zhao et al.
NATURE (2017)
Anomalously low electronic thermal conductivity in metallic vanadium dioxide
Lee Sangwook et al.
SCIENCE (2017)
The role of microstructural features on the electrical resistivity and mechanical properties of powder metallurgy Al-SiC-Al2O3 nanocomposites
F. Khodabakhshi et al.
MATERIALS & DESIGN (2017)
Effect of nano ZrO2 on strengthening and electrical properties of Cu-matrix nanocomposits prepared by mechanical alloying
Mohammed A. Taha et al.
CERAMICS INTERNATIONAL (2017)
Simultaneously enhancing the strength, ductility and conductivity of copper matrix composites with graphene nanoribbons
Ming Yang et al.
CARBON (2017)
Friction and wear behavior of Al-SiC(n) hybrid composites with carbon addition
Bartosz Hekner et al.
COMPOSITES PART B-ENGINEERING (2017)
Wearable Electricity Generators Fabricated Utilizing Transparent Electronic Textiles Based on Polyester/Ag Nanowires/Graphene Core-Shell Nanocomposites
Chaoxing Wu et al.
ACS Nano (2016)
Experimental observation of spin-to-charge current conversion at non-magnetic metal/Bi2O3 interfaces
Shutaro Karube et al.
APPLIED PHYSICS EXPRESS (2016)
Effects of graphene content on the microstructure and properties of copper matrix composites
Fanyan Chen et al.
CARBON (2016)
Enhanced strength and excellent transport properties of a superaligned carbon nanotubes reinforced copper matrix laminar composite
Jing Shuai et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Fatigue fracture of friction-stir processed Al-Al3Ti-MgO hybrid nanocomposites
P. Sahandi Zangabad et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Effect of La addition on the particle characteristics, mechanical and electrical properties of in situ Cu-TiB2 composites
Cunlei Zou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
In-situ fabrication and characterization of ultrafine structured Cu-TiC composites with high strength and high conductivity by mechanical milling
Fenglin Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Electron mean free path in elemental metals
Daniel Gall
JOURNAL OF APPLIED PHYSICS (2016)
Properties of Ti/TiC Interfaces from Molecular Dynamics Simulations
Tao Liang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2016)
Fabrication of tungsten particles reinforced aluminum matrix composites using multi-pass friction stir processing: Evaluation of microstructural, mechanical and electrical behavior
Guoqiang Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Influence of grain boundary state on electrical resistivity of ultrafine grained aluminium
T. S. Orlova et al.
PHILOSOPHICAL MAGAZINE (2016)
Stress corrosion cracking behaviour of 7xxx aluminum alloys: A literature review
A. C. Umamaheshwer Rao et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)
Electrical Resistivity, Tribological Behaviour of Multiwalled Carbon Nanotubes and Nanoboron Carbide Particles Reinforced Copper Hybrid Composites for Pantograph Application
N. Selvakumar et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2016)
Estimation of the electrical conductivity of TiB2/Al composites by using image analysis
Kenjiro Sugio et al.
MECHANICAL ENGINEERING JOURNAL (2016)
Graphene-and-Copper Artificial Nacre Fabricated by a Preform Impregnation Process: Bioinspired Strategy for Strengthening-Toughening of Metal Matrix Composite
Ding-Bang Xiong et al.
ACS NANO (2015)
Metal Matrix-Metal Nanoparticle Composites with Tunable Melting Temperature and High Thermal Conductivity for Phase-Change Thermal Storage
Minglu Liu et al.
ACS NANO (2015)
The effect of type and ratio of reinforcement on the synthesis and characterization Cu-based nanocomposites by flake powder metallurgy
Temel Varol et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
High-temperature resistivity of aluminum-carbon nanotube composites
V. Genova et al.
JOURNAL OF MATERIALS SCIENCE (2015)
Tensile and fracture behavior of nano/micro TiB2 particle reinforced casting A356 aluminum alloy composites
M. Karbalaei Akbari et al.
MATERIALS & DESIGN (2015)
The nano-sized TiC particle reinforced Al-Cu matrix composite with superior tensile ductility
Dongshuai Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles
Lian-Yi Chen et al.
NATURE (2015)
Preparation of in-situ Cu/NbC nanocomposite and its functionally graded behavior for electrical contact applications
S. Gholami Shiri et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
A Unified Model for the Prediction of Yield Strength in Particulate-Reinforced Metal Matrix Nanocomposites
F. A. Mirza et al.
MATERIALS (2015)
Interfacial valence electron localization and the corrosion resistance of Al-SiC nanocomposite
Sareh Mosleh-Shirazi et al.
SCIENTIFIC REPORTS (2015)
Modeling the electrical resistivity of deformation processed metal-metal composites
Liang Tian et al.
ACTA MATERIALIA (2014)
Electrical conductivity of a novel cast 6351 Al-Al4SiC4 in situ composite
Manas Kumar Mondal et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Tensile Strength and Electrical Conductivity of Carbon Nanotube Reinforced Aluminum Matrix Composites Fabricated by Powder Metallurgy Combined with Friction Stir Processing
Z. Y. Liu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2014)
Ag-graphene hybrid conductive ink for writing electronics
L. Y. Xu et al.
NANOTECHNOLOGY (2014)
Cross accumulative roll bonding A novel mechanical technique for significant improvement of stir-cast Al/Al2O3 nanocomposite properties
Mohammad Reza Kamali Ardakani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Microstructure and properties of hot extruded Cu-1 wt% Al2O3 nano-composites synthesized by various techniques
S. B. Chandrasekhar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Generation of Oxygen Vacancies at a Au/TiO2 Perimeter Interface during CO Oxidation Detected by in Situ Electrical Conductance Measurement
Yasushi Maeda et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Evolutionary Kinetics of Graphene Formation on Copper
Kemal Celebi et al.
NANO LETTERS (2013)
Kondo-like behavior near the metal-to-insulator transition of nanoscale granular aluminum
N. Bachar et al.
PHYSICAL REVIEW B (2013)
Solid-solution copper alloys with high strength and high electrical conductivity
Kazunari Maki et al.
SCRIPTA MATERIALIA (2013)
One hundred fold increase in current carrying capacity in a carbon nanotube-copper composite
Chandramouli Subramaniam et al.
NATURE COMMUNICATIONS (2013)
Metal-Matrix Nanocomposites with Tailored Coefficients of Thermal Expansion for Improved Thermomechanical Reliability
J. E. Trujillo et al.
JOURNAL OF ELECTRONIC MATERIALS (2012)
Theoretical study and pathways for nanoparticle capture during solidification of metal melt
J. Q. Xu et al.
JOURNAL OF PHYSICS-CONDENSED MATTER (2012)
Fabrication of in situ Cu/SiC composites using multi-pass friction stir processing: Evaluation of microstructural, porosity, mechanical and electrical behavior
Mohsen Barmouz et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Fabrication and evaluation of mechanical and tribological properties of boron carbide reinforced aluminum matrix nanocomposites
E. Mohammad Sharifi et al.
MATERIALS & DESIGN (2011)
Effect of Mo addition on the microstructure and wear resistance of in situ TiC/Al composite
Qianlin Wu et al.
MATERIALS & DESIGN (2011)
Mechanical properties and electrical conductivity of Cu-Cr and Cu-Cr-4% SiC nanocomposites for thermo-electric applications
Suhrit Mula et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Effect of size and shape of metal particles to improve hardness and electrical properties of carbon nanotube reinforced copper and copper alloy composites
Sheikh M. Uddin et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Effects of copper and Al2O3 particles on characteristics of Cu-Al2O3 composites
Viseslava Rajkovic et al.
MATERIALS & DESIGN (2010)
Resistivity of thin Cu films coated with Ta, Ti, Ru, Al, and Pd barrier layers from first principles
Ferdows Zahid et al.
PHYSICAL REVIEW B (2010)
Enzyme immobilization on Ag nanoparticles/polyaniline nanocomposites
Frank N. Crespilho et al.
BIOSENSORS & BIOELECTRONICS (2009)
Contact/scratch-induced surface deformation and damage of copper-graphite particulate composites
T. Futami et al.
CARBON (2009)
On the role of nano-size SiC on lattice strain and grain size of Al/SiC nanocomposite
Y. Saberi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Thermal properties of nanocrystalline Al composites reinforced by AlN nanoparticles
Y. Q. Liu et al.
JOURNAL OF MATERIALS RESEARCH (2009)
Microstructure, mechanical properties, electrical conductivity and wear behavior of high volume TiC reinforced Cu-matrix composites
Farid Akhtar et al.
MATERIALS CHARACTERIZATION (2009)
Electrical and mechanical properties of carbon nanotube reinforced copper nanocomposites fabricated by electroless deposition process
Walid M. Daoush et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Adhesion of Ti and TiC Coatings on PMMA Subject to Plasma Treatment: Effect of Intermediate Layers of Al2O3 and TiO2 Deposited by Atomic Layer Deposition
Tommi O. Kaariainen et al.
PLASMA PROCESSES AND POLYMERS (2009)
Al2O3 Particle Size Effect on Reinforced Copper Alloys: An Experimental Study
M. A. El-Hadek et al.
STRAIN (2009)
Effect of carbon nanotubes on the shear strength and electrical resistivity of a lead-free solder
S. M. L. Nai et al.
JOURNAL OF ELECTRONIC MATERIALS (2008)
Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites
Z. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Structural evolution during mechanical milling of nanometric and micrometric A12O3 reinforced A1 matrix composites
Z. Razavi Hesabi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength
Z Zhang et al.
SCRIPTA MATERIALIA (2006)
The role of graphite particles in the high-temperature wear of copper hybrid composites against steel
YZ Zhan et al.
MATERIALS & DESIGN (2006)
Interface energy of semicoherent metal-ceramic interfaces -: art. no. 226108
SAE Johansson et al.
PHYSICAL REVIEW LETTERS (2005)
Electrical conductivity measurement of metal plates using broadband eddy-current and four-point methods
N Bowler et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2005)
Fabrication and properties of silver-matrix composites reinforced by carbon nanotubes
Y Feng et al.
MATERIALS CHARACTERIZATION (2005)
Microstructure and electrical conductivity of Al-SiCp composites produced by spray forming process
VC Srivastava et al.
BULLETIN OF MATERIALS SCIENCE (2005)
Ultrahigh strength and high electrical conductivity in copper
L Lu et al.
SCIENCE (2004)
Microstructure and microhardness of SiC nanoparticles reinforced magnesium composites fabricated by ultrasonic method
J Lan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Electrical resistivity of fully-relaxed grain boundaries in nanocrystalline Cu
LH Qian et al.
SCRIPTA MATERIALIA (2004)
Electrical resistivity of metal matrix composites
SY Chang et al.
ACTA MATERIALIA (2003)
Structure, bonding, and adhesion at the TiC(100)/Fe(110) interface from first principles
A Arya et al.
JOURNAL OF CHEMICAL PHYSICS (2003)