☆ 4.6 Article

A novel low-damage and low-abrasive wear processing method of Cf/SiC ceramic matrix composites: Laser-induced ablation-assisted grinding

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Hole characteristics and surface damage formation mechanisms of Cf/SiC composites machined by abrasive waterjet

Yifei Zhang et al.

Summary: This study investigates the impact of abrasive waterjet on the dimensional accuracy and machining damage of C-f/SiC composites. The results provide insights on improving the precision and reducing the damage in hole machining for ceramic matrix composite materials.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Review Engineering, Aerospace

Machining of SiC ceramic matrix composites: A review

Qinglong An et al.

Summary: FRCMCs-SiC, as the preferred material for hot section components, safety-critical components, and braking components, faces challenges in machining due to high brittleness, anisotropy, and heterogeneity. With increasing demand for FRCMCs-SiC parts, high-quality and high-efficient machining has become a hot issue.

CHINESE JOURNAL OF AERONAUTICS (2021)

Add to Collection

Article Materials Science, Ceramics

Effects of grinding speed on the material removal mechanism in single grain grinding of SiCf/SiC ceramic matrix composite

Jingfei Yin et al.

Summary: This study investigates the effect of grinding speed on the material removal mechanism of SiCf/SiC, showing that high-speed grinding can increase material brittleness and fiber breakage, leading to improved groove surface quality and machining efficiency.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Engineering, Aerospace

Diamond wheel grinding characteristics of 3D orthogonal quartz fiber reinforced silica ceramic matrix composite

Bin Lin et al.

Summary: Fiber-reinforced silica ceramic matrix composites have gained attention for their applications in aeronautics, but the machining properties and mechanisms remain unclear. A full-factor grinding experiment was conducted to study the material's machining characteristics, revealing a correlation between surface roughness changes and an increase in grinding force, mainly due to fiber fracture.

CHINESE JOURNAL OF AERONAUTICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Investigation on abrasive wear mechanism of single diamond grain in flexible scribing titanium alloy

Qinghong Wan et al.

Summary: Through theoretical and experimental studies, this research explores the wear mechanism of diamond grain in flexible scribing titanium alloy, revealing that friction speed has the greatest effect on frictional temperature.

DIAMOND AND RELATED MATERIALS (2021)

Add to Collection

Article Engineering, Industrial

Mechanics analysis and predictive force models for the single-diamond grain grinding of carbon fiber reinforced polymers using CNT nano-lubricant

Teng Gao et al.

Summary: The study compared the mechanical properties of CFRP in flood cooling and dry grinding, and proposed the grinding mechanics with CNT nano-lubricant minimum quantity lubrication. Four sub-models were developed to explain the grinding mechanisms of CFRP under special transversal conditions.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Ceramics

Investigations on continuous-wave laser and pulsed laser induced controllable ablation of SiCf/SiC composites

Jie Chen et al.

Summary: The study investigated the laser-induced ablation mechanism and products of SiCf/SiC composites through numerical simulation and experiments, finding that the ablation depth could be controlled by adjusting laser parameters, with continuous-wave (CW) mode resulting in greater depth. Adjusting the scanning speed and spacing were significant factors in controlling the depth of laser-induced ablation.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Experimental investigation on fatigue property at room temperature of C/SiC composites machined by rotary ultrasonic milling

Feng Xue et al.

Summary: The study showed that the use of Rotary Ultrasonic Milling technology in processing C/SiC composites can significantly enhance their fatigue performance, reduce damage rate, and delay damage accumulation and fiber reinforcement stages.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Engineering, Industrial

On the prediction of surface burn and its thickness in grinding processes

Hamid Jamshidi et al.

Summary: The study suggests that metal oxidation at high temperatures is the mechanism responsible for surface burn during grinding processes. A model considering temperature and exposure time was developed to predict the occurrence of surface burn and its thickness, with validation through grinding tests. The model demonstrated satisfactory performance in selecting burn-free and high productivity grinding conditions.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Manufacturing

Transformation of fracture mechanism and damage behavior of ceramic-matrix composites during nano-scratching

Jie Chen et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Materials Science, Ceramics

Tensile properties of two-dimensional carbon fiber reinforced silicon carbide composites at temperatures up to 2300 °C

Tianbao Cheng et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Chemistry, Physical

Effect of shear strain rate on interlaminar shear behavior of 2D-C/SiC composites: A damage transition from notch ends initiation to gauge section initiation

Wei Hu et al.

CARBON (2020)

Add to Collection

Article Chemistry, Physical

Research on Material Removal Mechanism of C/SiC Composites in Ultrasound Vibration-Assisted Grinding

Dongpo Wang et al.

MATERIALS (2020)

Add to Collection

Article Automation & Control Systems

Investigation on machined surface quality in ultrasonic-assisted grinding of Cf/SiC composites based on fracture mechanism of carbon fibers

Jie Chen et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Ceramics

Hole exit quality and machined surface integrity of 2D Cf/SiC composites drilled by PCD tools

Jie Chen et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Engineering, Manufacturing

Deformation mechanism and force modelling of the grinding of YAG single crystals

Chen Li et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural evolution of carbon fiber reinforced SiC-based matrix composites during laser ablation process

Xiaolin Dang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Engineering, Mechanical

Modelling and simulation of the grinding force in rail grinding that considers the swing angle of the grinding stone

K. Zhou et al.

TRIBOLOGY INTERNATIONAL (2019)

Add to Collection

Article Chemistry, Physical

The Effects of Laser Parameters and the Ablation Mechanism in Laser Ablation of C/SiC Composite

Sining Pan et al.

MATERIALS (2019)

Add to Collection

Article Materials Science, Ceramics

Study of material removal mechanisms in grinding of C/SiC composites via single-abrasive scratch tests

Yuanchen Li et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Ceramics

Material removal mechanism of laser-assisted grinding of RB-SiC ceramics and process optimization

Zhipeng Li et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Automation & Control Systems

Improved machinability of SiC/SiC ceramic matrix composite via laser-assisted micromachining

Xiangyang Dong et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

Add to Collection

Article Automation & Control Systems

Study on surface/subsurface breakage in ultrasonic assisted grinding of C/SiC composites

Kai Ding et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

Add to Collection

Article Engineering, Manufacturing

Assessment in drilling of C/C-SiC composites using brazed diamond drills

Youqiang Xing et al.

JOURNAL OF MANUFACTURING PROCESSES (2017)

Add to Collection

Article Chemistry, Physical

Effect of different parameters on machining of SiC/SiC composites via pico-second laser

Weinan Li et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

On the wettability diversity of C/SiC surface: Comparison of the ground C/SiC surface and ablated C/SiC surface from three aspects

M. L. Wu et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Effect of fiber orientations on surface grinding process of unidirectional C/SiC composites

Lifeng Zhang et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Ablation behavior of C/SiC composites in plasma wind tunnel

Lei Luo et al.

CARBON (2016)

Add to Collection

Article Materials Science, Ceramics

Comparative study of micro topography on laser ablated C/SiC surfaces with typical uni-directional fibre ending orientations

M. L. Wu et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical wear of different crystallographic orientations for single abrasive diamond scratching on Ta12W

Haiyong Wu et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Machining parameter optimization of C/SiC composites using high power picosecond laser

Ruoheng Zhang et al.

APPLIED SURFACE SCIENCE (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Characterisation of 2D and 3D Tyranno SA 3 CVI SiCf/SiC composites

D. T. Blagoeva et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Add to Collection

Review Materials Science, Ceramics

Laser machining of structural ceramics-A review

Anoop N. Samant et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.