4.5 Review

Review on niobium application in microalloyed steel

Related references

Note: Only part of the references are listed.
Article Metallurgy & Metallurgical Engineering

Microstructure, property and deformation and fracture behavior of 800 MPa complex phase steel with different coiling temperatures

Jian-zhong Xue et al.

Summary: The microstructure and properties of 800 MPa hot-rolled complex phase steel with different coiling temperatures were studied, showing that steel coiled at 520 degrees C exhibited good mechanical properties and a relatively high hole expansion ratio.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2021)

Article Metallurgy & Metallurgical Engineering

Microstructure and properties evolution of Nb-bearing medium Cr wear-resistant cast steel during heat treatment

Jia-cheng Zhang et al.

Summary: The research investigates the impact of quenching temperature and cooling conditions on the microstructure and mechanical properties of a 0.2%Nb medium chromium wear-resistant cast steel. It reveals that lath martensite can be obtained under both air and oil cooling after austenitizing in the range of 900-1020 degrees C. Additionally, the total carbide content under air cooling is higher than that under oil cooling due to the lower cooling rate.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2021)

Article Thermodynamics

Challenges and opportunities in thermodynamic and kinetic modeling microalloyed HSLA steels using computational thermodynamics

A. Costa e Silva

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2020)

Article Materials Science, Multidisciplinary

Tracing Microalloy Precipitation in Nb-Ti HSLA Steel during Austenite Conditioning

Johannes Webel et al.

METALS (2020)

Article Nanoscience & Nanotechnology

Acquiring a low yield ratio well synchronized with enhanced strength of HSLA pipeline steels through adjusting multiple-phase microstructures

Xiaohua Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Article Materials Science, Multidisciplinary

Characterization of Microstructure in High-Hardness Surface Layer of Low-Carbon Steel

Haitao Xiao et al.

METALS (2020)

Article Nanoscience & Nanotechnology

Role of solute Nb in altering phase transformations during continuous cooling of a low-carbon steel

G. K. Bansal et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Article Metallurgy & Metallurgical Engineering

Prediction of alloy composition and microhardness by random forest in maraging stainless steels based on a cluster formula

Zhen Li et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2018)

Review Materials Science, Multidisciplinary

Formation mechanism and control methods of acicular ferrite in HSLA steels: A review

Yi Shao et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)

Article Materials Science, Multidisciplinary

Separate Evaluation of the Kinetics of Carbide Precipitation Occurring at the Interface of Preexisting Particles and Within the Austenitic Matrix in a Microalloyed Steel

Jae-Gil Jung et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)

Article Nanoscience & Nanotechnology

Effect of composition and thermo-mechanical processing schedule on the microstructure, precipitation and strengthening of Nb-microalloyed steel

A. Karmakar et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Article Metallurgy & Metallurgical Engineering

Carbide Precipitation in Ferrite in Nb-V-Bearing Low-Carbon Steel During Isothermal Quenching Process

Xiao-Lin Li et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2017)

Article Multidisciplinary Sciences

The Recrystallization Behavior in Ultrafine-Grained Structure Steel Fabricated by Cold Rolling and Annealing

Qing Yuan et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2017)

Article Metallurgy & Metallurgical Engineering

Effect of Annealing on the Microstructure and Mechanical Properties of a Low-Carbon Steel with Ultrafine Grains

Junyu Tian et al.

METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2017)

Article Metallurgy & Metallurgical Engineering

Effects of Nb Addition on Transformation Kinetics and Microstructure Properties in Low-Carbon Bainitic Steels

Rong Hou et al.

METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2017)

Article Metallurgy & Metallurgical Engineering

Effect of Lanthanum on the Precipitation of NbC in Ferritic Steels

Haiyan Wang et al.

ISIJ INTERNATIONAL (2016)

Article Materials Science, Multidisciplinary

Quantitative examination of carbide and sulphide precipitates in chemically complex steels processed by direct strip casting

Thomas Dorin et al.

MATERIALS CHARACTERIZATION (2016)

Article Materials Science, Multidisciplinary

Precipitation behavior and kinetics in Nb-V-bearing low-carbon steel

Xiaolin Li et al.

MATERIALS LETTERS (2016)

Article Nanoscience & Nanotechnology

A study on the relationship between microstructure and mechanical properties of acicular ferrite and upper bainite

Walter L. Costin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Article Nanoscience & Nanotechnology

Effect of step quenching on microstructures and mechanical properties of HSLA steel

Yongchang Liu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Article Materials Science, Multidisciplinary

Atom Probe Tomography Study of Multi-microalloyed Carbide and Carbo-Nitride Precipitates and the Precipitation Sequence in Nb-Ti HSLA Steels

Monica Kapoor et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)

Article Materials Science, Multidisciplinary

Effects of niobium and heat treatment on microstructure and mechanical properties of low carbon cast steels

W. L. Gao et al.

MATERIALS & DESIGN (2016)

Article Materials Science, Multidisciplinary

Super strong and highly ductile low alloy multiphase steels consisting of bainite, ferrite and retained austenite

A. Varshney et al.

MATERIALS & DESIGN (2016)

Article Materials Science, Multidisciplinary

Stress strain behavior of ferrite and bainite with nano-precipitation in low carbon steels

Naoya Kamikawa et al.

ACTA MATERIALIA (2015)

Article Materials Science, Multidisciplinary

Carbide precipitation in austenite of Nb-Mo-bearing low-carbon steel during stress relaxation

Zhengyan Zhang et al.

MATERIALS LETTERS (2015)

Article Nanoscience & Nanotechnology

Contribution of interphase precipitation on yield strength in thermomechanically simulated Ti-Nb and Ti-Nb-Mo microalloyed steels

F. Z. Bu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Article Nanoscience & Nanotechnology

Nano-sized precipitation and properties of a low carbon niobium micro-alloyed bainitic steel

Z. J. Xie et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Article Materials Science, Multidisciplinary

The Effect of Nb on the Continuous Cooling Transformation Curves of Ultra-Thin Strip CASTRIP(C) Steels

Kristin R. Carpenter et al.

METALS (2015)

Article Materials Science, Multidisciplinary

Austenite-ferrite transformation in enhanced niobium, low carbon steel

P. Yan et al.

MATERIALS SCIENCE AND TECHNOLOGY (2015)

Article Materials Science, Multidisciplinary

The Effect of Solute Nb on the Austenite-to-Ferrite Transformation

Tao Jia et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)

Article Metallurgy & Metallurgical Engineering

Characterization of Compound Particles Formed during Thin Slab Direct Rolling of Ti-added Nb HSLA Steel

Youryeol Lee et al.

ISIJ INTERNATIONAL (2014)

Article Thermodynamics

Thermodynamic analysis of precipitation processes in Nb-Ti-microalloyed Si-Al TRIP steel

A. Grajcar

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2014)

Article Nanoscience & Nanotechnology

Effect of microstructural constituents on strength-toughness combination in a low carbon bainitic steel

H. F. Lan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Article Nanoscience & Nanotechnology

Effect of niobium clustering and precipitation on strength of an NbTi-microalloyed ferritic steel

A. G. Kostryzhev et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Article Materials Science, Multidisciplinary

Model for Strain-Induced Precipitation Kinetics in Microalloyed Steels

Sebastian F. Medina et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)

Article Nanoscience & Nanotechnology

Effect of austenite deformation temperature on Nb clustering and precipitation in microalloyed steel

E. V. Pereloma et al.

SCRIPTA MATERIALIA (2014)

Article Materials Science, Multidisciplinary

Effect of dissolution and precipitation of Nb on the formation of acicular ferrite/bainite ferrite in low-carbon HSLA steels

Yan Chen et al.

MATERIALS CHARACTERIZATION (2013)

Article Metallurgy & Metallurgical Engineering

Study on Isothermal Precipitation Behavior of Nano-Scale (Nb,Ti)C in Ferrite/Bainite in 780MPa Grade Ultra-High Strength Steel

Xiaonan Wang et al.

STEEL RESEARCH INTERNATIONAL (2013)

Article Metallurgy & Metallurgical Engineering

Effect of Cooling Rates on the Second-Phase Precipitation and Proeutectoid Phase Transformation of a NbTi Microalloyed Steel Slab

Fanjun Ma et al.

STEEL RESEARCH INTERNATIONAL (2013)

Article Metallurgy & Metallurgical Engineering

Effect of Nb Solute and NbC Precipitates on Dynamic or Static Recrystallization in Nb Steels

Xiao Fu-ren et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2012)

Article Materials Science, Multidisciplinary

Recrystallization, Precipitation Behaviors, and Refinement of Austenite Grains in High Mn, High Nb Steel

C. L. Miao et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)

Article Engineering, Multidisciplinary

Stress-strain behavior of multi-phase high performance structural steel

Nie WenJin et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2012)

Article Nanoscience & Nanotechnology

Strengthening from Nb-rich clusters in a Nb-microalloyed steel

Kelvin Y. Xie et al.

SCRIPTA MATERIALIA (2012)

Proceedings Paper Engineering, Manufacturing

Thermodynamic Calculation of Microalloy Precipitation in Austenite Region for Fe-C-N-Al-Ti-Nb Steel

Lizhong Chang et al.

NEW MATERIALS AND PROCESSES, PTS 1-3 (2012)

Article Materials Science, Multidisciplinary

Isothermal treatment influence on nanometer-size carbide precipitation of titanium-bearing low carbon steel

Tzu-Pin Wang et al.

MATERIALS LETTERS (2011)

Article Nanoscience & Nanotechnology

Recrystallization-precipitation interaction during austenite hot deformation of a Nb microalloyed steel

S. Vervynckt et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

Article Nanoscience & Nanotechnology

Evolution of microstructure and precipitation state during thermomechanical processing of a X80 microalloyed steel

Manuel Gomez et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

Article Materials Science, Multidisciplinary

Effect of Nb Microalloying and Hot Rolling on Microstructure and Properties of Ultrathin Cast Strip Steels Produced by the CASTRIPA® Process

Kelvin Y. Xie et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)

Article Metallurgy & Metallurgical Engineering

Precipitation Behavior and Its Strengthening Effect of X100 Pipeline Steel

Niu Tao et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2010)

Article Metallurgy & Metallurgical Engineering

Ultrafine Grained HSLA Steels for Cold Forming

R. Gonzalez et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2010)

Article Metallurgy & Metallurgical Engineering

Mechanical Properties and Microstructure of X120 Grade High Strength Pipeline Steel

Zhang Ji-ming et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2010)

Article Materials Science, Multidisciplinary

Dissolution and Precipitation Kinetics of Nb(C,N) in Austenite of a Low-Carbon Nb-Microalloyed Steel

June-Soo Park et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)

Article Metallurgy & Metallurgical Engineering

Phase transformation from fine-grained austenite

T. Furuhara et al.

ISIJ INTERNATIONAL (2008)

Article Nanoscience & Nanotechnology

Microstructure and properties of low manganese and niobium containing HIC pipeline steel

S. S. Nayak et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Article Nanoscience & Nanotechnology

The comparative effectiveness of Nb solute and NbC precipitates at impeding grain-boundary motion in Nb steels

C. R. Hutchinson et al.

SCRIPTA MATERIALIA (2008)

Article Metallurgy & Metallurgical Engineering

Influence of Microalloying Elements (Nb, V, Ti) on Yield Strength in Bainitic Steels

L. Rancel et al.

STEEL RESEARCH INTERNATIONAL (2008)

Article Nanoscience & Nanotechnology

Nb(C,N) precipitation kinetics in the bainite region of a low-carbon Nb-microalloyed steel

J. S. Park et al.

SCRIPTA MATERIALIA (2007)

Article Materials Science, Multidisciplinary

The effect of nb on the recrystallization and grain growth of ultra-high-purity α-Fe:: A combinatorial approach

C. W. Sinclair et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)

Article Metallurgy & Metallurgical Engineering

The onset temperatures of gamma to alpha-phase transformation in hot deformed and non-deformed Nb micro-alloyed steels

X. Q. Yuan et al.

ISIJ INTERNATIONAL (2006)

Article Nanoscience & Nanotechnology

Influence of thermomechanical treatment on microstructure and mechanical properties of Nb bearing weather resistant steel

SN Prasad et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

Article Nanoscience & Nanotechnology

Effect of microcontent Nb in solution on the strength of low carbon steels

QB Yu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Article Metallurgy & Metallurgical Engineering

Development of high strength hot-rolled sheet steel consisting of ferrite and nanometer-sized carbides

Y Funakawa et al.

ISIJ INTERNATIONAL (2004)

Article Nanoscience & Nanotechnology

Effects of Nb on strain induced ferrite transformation in C-Mn steel

SC Hong et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

Article Nanoscience & Nanotechnology

Influence of thermo-mechanical processing and different post-cooling techniques on structure and properties of an ultra low carbon Cu bearing HSLA forging

A Ghosh et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

Article Nanoscience & Nanotechnology

The effects of thermo-mechanical control process on microstructures and mechanical properties of a commercial pipeline steel

MC Zhao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)

Article Materials Science, Multidisciplinary

Effect of composition and Austenite deformation on the transformation characteristics of low-carbon and ultralow-carbon microalloyed steels

P Cizek et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)

Article Materials Science, Multidisciplinary

Grain coarsening inhibited by solute segregation

R Kirchheim

ACTA MATERIALIA (2002)

Article Materials Science, Multidisciplinary

Precipitation behavior and its effect on strengthening of an HSLA-Nb/Ti steel

M Charleux et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)

Article Materials Science, Multidisciplinary

Modelling the kinetics of strain induced precipitation in Nb microalloyed steels

B Dutta et al.

ACTA MATERIALIA (2001)

Article Nanoscience & Nanotechnology

Influence of Mo on precipitation hardening in hot rolled HSLA steels containing Nb

WB Lee et al.

SCRIPTA MATERIALIA (2000)

Article Materials Science, Multidisciplinary

Mathematical modeling of the hot strip rolling of microalloyed Nb, multiply-alloyed Cr-Mo, and plain C-Mn steels

F Siciliano et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)