Related references
Note: Only part of the references are listed.Prospective environmental and techno-economic assessment of steam production by means of heat pipes in the steel industry
Rocio Llera et al.
ENERGY (2022)
China's green deal: Can China's cement industry achieve carbon neutral emissions by 2060?
Christian Doh Dinga et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)
Many-objective optimization of energy conservation and emission reduction in China's cement industry
Christian Doh Dinga et al.
APPLIED ENERGY (2021)
Day-Ahead scheduling of centralized energy storage system in electrical networks by proposed stochastic MILP-Based bi-objective optimization approach
M. Eslahi et al.
ELECTRIC POWER SYSTEMS RESEARCH (2021)
Low-carbon production of iron and steel: Technology options, economic assessment, and policy
Zhiyuan Fan et al.
JOULE (2021)
Decarbonizing China's iron and steel industry from the supply and demand sides for carbon neutrality
Ming Ren et al.
APPLIED ENERGY (2021)
Decarbonization of the Iron and Steel Industry with Direct Reduction of Iron Ore with Green Hydrogen
Abhinav Bhaskar et al.
ENERGIES (2020)
Optimal energy management for multi-microgrid considering demand response programs: A stochastic multi-objective framework
Hamid Karimi et al.
ENERGY (2020)
Many-objective optimization of technology implementation in the industrial symbiosis system based on a modified NSGA-III
Xin Cao et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Economic potential for substitution of fossil fuels with liquefied biomethane in Swedish iron and steel industry - Synergy and competition with other sectors
Johan M. Ahlstrom et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
Quantitative assessment of energy conservation and emission reduction effects of nationwide industrial symbiosis in China
Xin Cao et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2020)
Co-application of energy uncoupling and ultrafiltration in sludge treatment: Evaluations of sludge reduction, supernatant recovery and membrane fouling control
An Ding et al.
FRONTIERS OF ENVIRONMENTAL SCIENCE & ENGINEERING (2020)
Robust optimization based energy management of a fuel cell/ ultra-capacitor hybrid electric vehicle under uncertainty
Rayhane Koubaa et al.
ENERGY (2020)
Thermo-economic and environmental multi-objective optimization of a novel arranged biomass-fueled gas engine and backpressure steam turbine combined system for pulp and paper mills
Sepehr Sanaye et al.
SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2020)
Integrated and intelligent design framework for cemented paste backfill: A combination of robust machine learning modelling and multi-objective optimization
Chongchong Qi et al.
MINERALS ENGINEERING (2020)
Recent progress in sustainable and energy-efficient technologies for sinter production in the iron and steel industry
Zhilong Cheng et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)
Multi-objective optimization of synergic energy conservation and CO2 emission reduction in China's iron and steel industry under uncertainty
Yihan Wang et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)
Quantitative assessment of energy conservation potential and environmental benefits of an iron and steel plant in China
Wenqi Long et al.
JOURNAL OF CLEANER PRODUCTION (2020)
MULTI OBJECTIVE OPTIMIZATION OF WASTE HEAT RECOVERY IN CEMENT INDUSTRY (A CASE STUDY)
Mostafa Mostafavi Sani et al.
JOURNAL OF THERMAL ENGINEERING (2020)
Energy commodity uncertainties and the systematic risk of US industries
Muhammad Abubakr Naeem et al.
ENERGY ECONOMICS (2020)
Robust multi-objective optimization for energy production scheduling in microgrids
Luhao Wang et al.
ENGINEERING OPTIMIZATION (2019)
Multi-Objective Optimization for China's Power Carbon Emission Reduction by 2035
Wu Jianjun et al.
JOURNAL OF THERMAL SCIENCE (2019)
A many-objective optimization of industrial environmental management using NSGA-III: A case of China's iron and steel industry
Yihan Wang et al.
APPLIED ENERGY (2019)
Trade off between environment, energy consumption and human development: Do levels of economic development matter?
Nguyen Van Tran et al.
ENERGY (2019)
A marginal abatement cost curve for material efficiency accounting for uncertainty
Cyrille F. Dunant et al.
RESOURCES CONSERVATION AND RECYCLING (2019)
Optimization of energy use with CO2 emission reducing in an integrated iron and steel plant
Qi Zhang et al.
APPLIED THERMAL ENGINEERING (2019)
Energy-saving and emission-reduction technology selection and CO2 emission reduction potential of China's iron and steel industry under energy substitution policy
Xianchun Tan et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Morris Sensitivity Analysis for Hydrothermal Coupling Parameters of Embankment Dam: A Case Study
Jie Ren et al.
MATHEMATICAL PROBLEMS IN ENGINEERING (2019)
Quantitative analysis of the precise energy conservation and emission reduction path in China's iron and steel industry
Zongguo Wen et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2019)
Energy and resource conservation and air pollution abatement in China's iron and steel industry
Qi Zhang et al.
RESOURCES CONSERVATION AND RECYCLING (2019)
Evaluating the performance of aggregate production planning strategies under uncertainty in soft drink industry
Aboozar Jamalnia et al.
JOURNAL OF MANUFACTURING SYSTEMS (2019)
Decision making in multiobjective optimization problems under uncertainty: balancing between robustness and quality
Yue Zhou-Kangas et al.
OR SPECTRUM (2019)
Utilization of MSWI fly ash as partial cement or sand substitute with focus on cementing efficiency and health risk assessment
Lei Zheng et al.
FRONTIERS OF ENVIRONMENTAL SCIENCE & ENGINEERING (2019)
Possibilities for CO2 emission reduction using biomass in European integrated steel plants
H. Mandova et al.
BIOMASS & BIOENERGY (2018)
Multi-objective optimisation and fast decision-making method for working fluid selection in organic Rankine cycle with low-temperature waste heat source in industry
Xu Zhang et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
A review of technology and policy deep decarbonization pathway options for making energy-intensive industry production consistent with the Paris Agreement
Chris Bataille et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Evaluation of energy saving potentials, costs and uncertainties in the chemical industry in Germany
Fabian Buhler et al.
APPLIED ENERGY (2018)
Assessment of hydrogen direct reduction for fossil-free steelmaking
Valentin Vogl et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Uncertainty analysis of industrial energy conservation management in China's iron and steel industry
Zongguo Wen et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2018)
Global assessment of biomass suitability for ironmaking - Opportunities for co-location of sustainable biomass, iron and steel production and supportive policies
Hana Mandova et al.
SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2018)
Symbiotic technology-based potential for energy saving: A case study in China's iron and steel industrial parks
Zongguo Wen et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Robust multi-objective optimization for sustainable design of distributed energy supply systems
Dinah Elena Majewski et al.
COMPUTERS & CHEMICAL ENGINEERING (2017)
An energy intensity optimization model for production system in iron and steel industry
Biao Lu et al.
APPLIED THERMAL ENGINEERING (2016)
A multi-objective optimization approach for integrated production planning under interval uncertainties in the steel industry
Jianhua Lin et al.
COMPUTERS & OPERATIONS RESEARCH (2016)
A bottom-up optimization model for long-term CO2 emissions reduction pathway in the cement industry: A case study of China
Jin-Hua Xu et al.
INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2016)
Goal and technology path of CO2 mitigation in China's cement industry: from the perspective of co-benefit
Qilu Tan et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Biomass applications in iron and steel industry: An overview of challenges and opportunities
Elsayed Mousa et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Modeling the dynamic mechanism between cement CO2 emissions and clinker quality to realize low-carbon cement
Zhi Cao et al.
RESOURCES CONSERVATION AND RECYCLING (2016)
Multi-objective optimization applied to retrofit analysis: A case study for the iron and steel industry
Alessandro Maddaloni et al.
APPLIED THERMAL ENGINEERING (2015)
Integrated Control of Emission Reductions, Energy-Saving, and Cost-Benefit Using a Multi-Objective Optimization Technique in the Pulp and Paper Industry
Zongguo Wen et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2015)
Stochastic, Multiobjective, Mixed-Integer Optimization Model for Wastewater-Derived Energy
Chalida U-tapao et al.
JOURNAL OF ENERGY ENGINEERING (2015)
Stochastic, Multiobjective, Mixed-Integer Optimization Model for Wastewater-Derived Energy
Chalida U-tapao et al.
JOURNAL OF ENERGY ENGINEERING (2015)
A plant-specific bottom-up approach for assessing the cost-effective energy conservation potential and its ability to compensate rising energy-related costs in the German iron and steel industry
Jean-Christian Brunke et al.
ENERGY POLICY (2014)
Estimates of the potential for energy conservation and CO2 emissions mitigation based on Asian-Pacific Integrated Model (AIM): the case of the iron and steel industry in China
Zongguo Wen et al.
JOURNAL OF CLEANER PRODUCTION (2014)
A bottom-up model to estimate the energy efficiency improvement and CO2 emission reduction potentials in the Chinese iron and steel industry
Ali Hasanbeigi et al.
ENERGY (2013)
Analysis of low-carbon industrial symbiosis technology for carbon mitigation in a Chinese iron/steel industrial park: A case study with carbon flow analysis
Hui Zhang et al.
ENERGY POLICY (2013)
Morris method of sensitivity analysis applied to assess the importance of input variables on urban water supply yield - A case study
D. M. King et al.
JOURNAL OF HYDROLOGY (2013)
Comprehensive evaluation of energy conservation and emission reduction policies
Todd Litman
TRANSPORTATION RESEARCH PART A-POLICY AND PRACTICE (2013)
Technical Note: Method of Morris effectively reduces the computational demands of global sensitivity analysis for distributed watershed models
J. D. Herman et al.
HYDROLOGY AND EARTH SYSTEM SCIENCES (2013)
Modeling and Optimization of Cement Raw Materials Blending Process
Xianhong Li et al.
MATHEMATICAL PROBLEMS IN ENGINEERING (2012)
Introducing robustness in multi-objective optimization
Kalyanmoy Deb et al.
EVOLUTIONARY COMPUTATION (2006)
Industrial characteristics, environmental regulations and air pollution: an analysis of the UK manufacturing sector
MA Cole et al.
JOURNAL OF ENVIRONMENTAL ECONOMICS AND MANAGEMENT (2005)
Robust discrete optimization and network flows
D Bertsimas et al.
MATHEMATICAL PROGRAMMING (2003)