Nitrogen and organic load removal from anaerobically digested leachate using a hybrid electro-oxidation and electro-coagulation process

This study evaluated the performance of an integrated electrochemical process, which simultaneously utilizes electro-oxidation (EO) and electro-coagulation (EC) methods while removing organic and nitrogen loads from high-strength leachate obtained from anaerobic digesters. A bipolar arrangement of the aluminum electrode, sandwiched between a monopolar boron-doped diamond anode and stainless-steel cathode, integrates EC and EO into a single reactor. This arrangement demonstrated an enhancement of 33%, 27%, and 24% in removal capacity for ammonia nitrogen (AN), total Kjeldahl nitrogen (TKN), and total nitrogen, respectively, when compared to just EO at 0.8 A current intensity after 24 h. Increasing the current intensity from 0.4 A to 1.0 A enhanced the organic nitrogen and AN removal. Chemical oxygen demand (COD) exhibited initial faster removal kinetics with higher current intensities and eventually reached 95%-98% removal for intensities of 0.6 A or higher. Additional removal for AN, TKN were also observed with increasing current intensity. Lowering the pH further expedited the COD removal kinetics. Reducing and maintaining the pH at 4, 6, and 8 by dosing of hydrochloric acid (HCl) resulted in the 100% removal of AN and TKN from the integrated system in 6, 8, and 20 h, respectively. Accelerated removal of COD and the enhanced removal of AN and TKN through pH control could be linked to the formation of active chlorine species in bulk solution. The integrated system offered lower energy consumption than EO due to oxidation on the additional anodic surface of the bipolar electrode, as well as the adsorption-precipitation of contaminants in aluminum flocs.

Automated summary

This study evaluated the performance of an integrated electrochemical process that combines electro-oxidation and electro-coagulation methods to remove organic and nitrogen loads from high-strength leachate. The integrated system demonstrated enhanced removal capacity for ammonia nitrogen, total Kjeldahl nitrogen, and total nitrogen compared to just electro-oxidation. Increasing the current intensity and lowering the pH further improved the removal efficiency. The integrated system also offered lower energy consumption compared to electro-oxidation alone due to additional oxidation and adsorption-precipitation processes.