☆ 4.5 Article

Bimetallic Nanocomposite of Gold/Silver Scattered in Chitosan via Laser Ablation for Electrical and Antibacterial Utilization

JOURNAL OF ELECTRONIC MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Food Science & Technology

Physicochemical Properties for Food Packaging and Toxicity Behaviors Against Healthy Cells of Environmentally Friendly Biocompatible Starch/Citric Acid/Polyvinyl Alcohol Biocomposite Films

Nedim Gurler et al.

Summary: This study focuses on the fabrication, characterization, and cytotoxic effects of polymeric biocomposite films composed of starch, citric acid, and polyvinyl alcohol. The addition of citric acid improves the physicochemical properties of the films. The biocomposite films show good biocompatibility.

STARCH-STARKE (2023)

Add to Collection

Article Chemistry, Physical

Piezo-phototronic effect promoted carrier separation in coaxial p-n junctions for self-powered photodetector

Xinxin Du et al.

Summary: This study demonstrates fiber-shaped photodetectors constructed by vertical organic-inorganic heterostructures, achieving self-powered behavior and promoted photoresponse through piezo-phototronic effect. By controlling bend-induced piezo-potentials, tunable photoresponse and ultrafast response and recovery were realized, enhancing light detection ability.

NANO ENERGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Improvement in electrical conductivity characterization of chitosan/Poly (ethylene oxide) incorporated with V2O5 NPs via laser ablation

Nasser S. S. Awwad et al.

Summary: In this study, chitosan-PEO/V2O5 NPs composite films were successfully synthesized using one-potential laser ablation method. The properties of the synthesized films were characterized using XRD, UV-Vis, SEM, and Ac conductivity. The results showed the complexation between V(2)O(5) NPs and chitosan-PEO matrix, and a decrease in optical bandgap after doping with V2O5 NPs. The AC conductivity also exhibited frequency-dependent behavior.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Materials Science, Composites

Ameliorating strength-ductility efficiency of graphene nanoplatelet-reinforced aluminum composites via deformation-driven metallurgy

Yuming Xie et al.

Summary: 1.5 wt% graphene nanoplatelet-reinforced aluminum matrix composites were prepared using deformation-driven metallurgy to enhance the strength-ductility efficiency. The study focused on the strengthening-toughening behaviors related to the dispersion of graphene nanoplatelets, interfacial bonding, and grain refinement. Severe plastic deformation and dynamic recrystallization resulted in the uniform dispersion of graphene nanoplatelets and ultra-fine microstructures. The composites showed high-efficiency interfacial bonding and achieved self-compensating spatial continuity through the automatic flow of Al2O3 nanodots.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Electrochemistry

Flexible electrospun iron compounds/carbon fibers: Phase transformation and electrochemical properties

Xiaoli Sheng et al.

Summary: This study describes the fabrication of flexible electrodes by embedding different iron-compound nanoparticles in carbon fibers. The Fe3O4/Fe3C/CF electrode exhibits higher capacity and better cycling stability in lithium-ion batteries, attributed to the high specific capacity of Fe3O4 and the excellent catalytic activity of Fe3C.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Engineering, Industrial

A novel low-damage and low-abrasive wear processing method of Cf/SiC ceramic matrix composites: Laser-induced ablation-assisted grinding

Kun Zhou et al.

Summary: This study proposes a novel high-efficiency, low-damage, and low-abrasive wear processing method for continuous fiber-reinforced ceramic matrix composites. The method combines laser ablation and grinding, resulting in improved grinding performances and surface integrity. The study provides an important method for high-performance processing of ceramic matrix composites components.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Composites

Graphene-reinforced potato starch composite films: Improvement of mechanical, barrier and electrical properties

Nedim Gurler et al.

Summary: Adding graphene to glycerol plasticized potato starch films improved tensile strength and electrical conductivity, but decreased light transmittance and increased opacity of the films. The interface interaction between graphene and potato starch films may be the reason for these improvements.

POLYMER COMPOSITES (2021)

Add to Collection

Article Chemistry, Physical

Cost-effective mechanochemical synthesis of highly dispersed supported transition metal catalysts for hydrogen storage

Yike Huang et al.

Summary: The research demonstrates a quasi-solid-state template strategy for the synthesis of highly dispersed metal catalysts on nitrogen-doped carbon, successfully applied in MgH2. This method achieves dispersion of metal precursor, evaporation of solvent, downsizing of templates, and successful synthesis of various metal catalysts in a single-step ball-milling process.

NANO ENERGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Insight on corrosion behavior of friction stir welded AA2219/AA2195 joints in astronautical engineering

Yuming Xie et al.

Summary: The corrosion behavior of friction stir welded Al-Cu alloy and Al-Cu-Li alloy joints was studied via various methods, with a focus on precipitation-driven corrosion mechanism. It was found that increasing welding speed to reduce heat input is an effective strategy to improve corrosion resistance in these joints.

CORROSION SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Effects of NbC content on microstructural evolution and mechanical properties of laser cladded Fe50Mn30Co10Cr10-xNbC composite coatings

Xiaofeng Li et al.

Summary: This study fabricated NbC reinforced Fe50Mn30Co10Cr10 high entropy alloy coatings with different NbC content by laser cladding, analyzed the formation mechanism and effects of NbC particles at micro/nano scale, and investigated the influence of NbC content on microstructure and mechanical properties of the coatings. It also explored the impact of NbC particles on FCC phase stability and demonstrated significant improvements in micro-hardness and wear resistance with increasing NbC content.

INTERMETALLICS (2021)

Add to Collection

Article Chemistry, Physical

Effect of construction angles on microstructure and mechanical properties of AlSi10Mg alloy fabricated by selective laser melting

Xiaofeng Li et al.

Summary: This study investigated the effects of different construction angles on the microstructure and mechanical properties of AlSi10Mg alloys by fabricating seven bulks with different angles using selective laser melting. The results showed that increasing the construction angle changed the laser track segments and affected the grain structure in the vertical planes. The mechanical property anisotropy of the alloy was attributed to various factors such as pores, equiaxed grain structure, ultra-fine equiaxed sub-grains, and working hardening.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Polymer Science

Improvement in antibacterial activity of Poly Vinyl Pyrrolidone/Chitosan incorporated by graphene oxide NPs via laser ablation

Mohammed S. Al Mogbel et al.

Summary: Laser ablation was used to create novel nanocomposites of Chitosan-Poly (Vinyl Pyrrolidone) blend incorporating graphene oxide nanoparticles (GONPs) for microbial applications. The antimicrobial behavior of the prepared Chitosan/PVP/GO NPs was significantly enhanced, showing increased inhibition zones against various bacteria and fungi. Further study could lead to their potential application in microbial settings.

JOURNAL OF POLYMER RESEARCH (2021)

Add to Collection

Article Engineering, Chemical

Silane doped biodegradable starch-PLA bilayer films for food packaging applications: Mechanical, thermal, barrier and biodegradability properties

Nedim Gurler et al.

Summary: This study recovered pure potato starch from waste potato starch and used it to manufacture a crosslinked film. A bilayer film was prepared by combining polylactic acid with modified potato starch, and the materials' characteristics and properties were investigated.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Strain rate shift for constitutive behaviour of sintered silver nanoparticles under nanoindentation

Xu Long et al.

Summary: This study investigates the stress-strain relationships of silver nanoparticles reinforced by SiC particles at different strain rates using nanoindentation technique, aiming to bridge the strain rate gap between nanoindentation and uniaxial tests. The proposed rate factors enable the evaluation of constitutive responses of sintered AgNP materials at different uniaxial strain rates, demonstrating the advantages of assessing the strain rate sensitivity using a Berkovich indenter.

MECHANICS OF MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis of modified chitosan TiO2 and SiO2 hydrogel nanocomposites for cadmium removal

Soudeh Banivaheb et al.

Summary: In this study, nanocomposites based on chitosan and titanium dioxide/silicon dioxide nanoparticles were synthesized for the removal of Cd2+ from water with good antibacterial properties. The nanocomposites exhibited porous structures and water absorption capacities, with high cadmium adsorption capacities.

JOURNAL OF SAUDI CHEMICAL SOCIETY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Core-shell chitosan microsphere with antimicrobial and vascularized functions for promoting skin wound healing

Hao Li et al.

Summary: This study developed chitosan (CS) microspheres with a core-shell structure encapsulating antimicrobial polypeptide (PonG1) and bFGF to effectively treat bacterial infection in wound locations and speed up wound healing. In vivo experiments demonstrated that CS microspheres containing PonG1 and bFGF had the best neovascularization and anti-inflammatory effects, with the strongest ability to repair skin wounds.

MATERIALS & DESIGN (2021)

Add to Collection

Review Engineering, Mechanical

Cryogenic minimum quantity lubrication machining: from mechanism to application

Mingzheng Liu et al.

Summary: The article discusses the role of cutting fluid in metal cutting and the environmental issues associated with traditional flood machining. It then explores the limitations of alternative technologies such as MQL and cryogenic cooling, and the potential of combining the two in CMQL technology. The benefits, mechanisms, and application prospects of CMQL are systematically analyzed, showing its superiority over cryogenic or MQL alone.

FRONTIERS OF MECHANICAL ENGINEERING (2021)

Add to Collection

Article Polymer Science

The fabrication of bilayer polylactic acid films from cross-linked starch as eco-friendly biodegradable materials: Synthesis, characterization, mechanical and physical properties

Nedim Gurler et al.

EUROPEAN POLYMER JOURNAL (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Synthesis, characterization, and evaluation of antimicrobial activity of novel Chitosan/Tigecycline composite

A. A. Menazea et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Chitosan-Stabilized Noble Metal Nanoparticles: Study of their Shape Evolution and Post-Functionalization Properties

Massimo Ottonelli et al.

NANOMATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation, structure and mechanical properties of Sialon ceramics by transition metal-catalyzed nitriding reaction

Qing-Ming Xiong et al.

RARE METALS (2020)

Add to Collection

Article Chemistry, Applied

Carboxymethyl cellulose-hydrogel embedded with modified magnetite nanoparticles and porous carbon: Effective environmental adsorbent

Samir Kamel et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Review Chemistry, Applied

Recent progresses in the application of cellulose, starch, alginate, gum, pectin, chitin and chitosan based (nano)catalysts in sustainable and selective oxidation reactions: A review

Mahmoud Nasrollahzadeh et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Composition and design of nanofibrous scaffolds of Mg/Se- hydroxyapatite/graphene oxide @ ε-polycaprolactone for wound healing applications

M. K. Ahmed et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Au-doped carbonated hydroxyapatite sputtered on alumina scaffolds via pulsed laser deposition for biomedical applications

M. K. Ahmed et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Chemistry, Physical

Ultra -thin silver nanoparticles film prepared via pulsed laser deposition: Synthesis, characterization, and its catalytic activity on reduction of 4- nitrophenol

Mohammed A. Zakaria et al.

SURFACES AND INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Wound healing activity of Chitosan/Polyvinyl Alcohol embedded by gold nanoparticles prepared by nanosecond laser ablation

A. A. Menazea et al.

JOURNAL OF MOLECULAR STRUCTURE (2020)

Add to Collection

Article Chemistry, Physical

Nanosecond laser ablation assisted the enhancement of antibacterial activity of copper oxide nano particles embedded though Polyethylene Oxide/Polyvinyl pyrrolidone blend matrix

A. A. Menazea et al.

RADIATION PHYSICS AND CHEMISTRY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Physical characterization and antibacterial activity of PVA/Chitosan matrix doped by selenium nanoparticles prepared via one-pot laser ablation route

A. A. Menazea et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Chemistry, Physical

Synthesis of ZnO/CdO thin film for catalytic degradation of 4-nitrophenol

Ayman M. Mostafa et al.

JOURNAL OF MOLECULAR STRUCTURE (2020)

Add to Collection

Article Chemistry, Physical

Gold nanoparticles doped Polyvinyl Alcohol/Chitosan blend via laser ablation for electrical conductivity enhancement

M. J. Tommalieh et al.

JOURNAL OF MOLECULAR STRUCTURE (2020)

Add to Collection

Article Chemistry, Physical

Laser-assisted for preparation ZnO/CdO thin film prepared by pulsed laser deposition for catalytic degradation

Ayman M. Mostafa et al.

RADIATION PHYSICS AND CHEMISTRY (2020)

Add to Collection

Article Engineering, Mechanical

Dispersing mechanism and tribological performance of vegetable oil-based CNT nanofluids with different surfactants

Teng Gao et al.

TRIBOLOGY INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Ceramics

Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions

Min Yang et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Polymer Science

Synthesis and Characterization of Graphene Oxide/Chitosan Composite Aerogels with High Mechanical Performance

Yang Gong et al.

POLYMERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Facile Photochemical Syntheses of Conjoined Nanotwin Gold-Silver Particles within a Biologically-Benign Chitosan Polymer

Daniel K. Korir et al.

NANOMATERIALS (2019)

Add to Collection

Article Chemistry, Physical

WO3 quantum dot: Synthesis, characterization and catalytic activity

Ayman M. Mostafa et al.

JOURNAL OF MOLECULAR STRUCTURE (2019)

Add to Collection

Article Materials Science, Ceramics

Precipitation of silver nanoparticles in silicate glasses via Nd:YAG nanosecond laser and its characterization

A. A. Menazea et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2019)

Add to Collection

Article Optics

Cadmium oxide/TEMPO-oxidized cellulose nanocomposites produced by pulsed laser ablation in liquid environment: Synthesis, characterization, and antimicrobial activity

Eman A. Mwafy et al.

OPTICS AND LASER TECHNOLOGY (2019)

Add to Collection

Article Multidisciplinary Sciences

Strategic design of a Mussel-inspired in situ reduced Ag/Au-Nanoparticle Coated Magnesium Alloy for enhanced viability, antibacterial property and decelerated corrosion rates for degradable implant Applications

Abdelrahman Rezk et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Multidisciplinary Sciences

Cytotoxicity of Ag, Au and Ag-Au bimetallic nanoparticles prepared using golden rod (Solidago canadensis) plant extract

Tarryn L. Botha et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Polymer Science

Nanosecond Pulsed Laser Ablation in Liquids as New Route for Preparing Polyvinyl Carbazole/Silver Nanoparticles Composite: Spectroscopic and Thermal Studies

A. A. Menazea et al.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2018)

Add to Collection

Article Optics

Preparation of highly conductive, transparent, and flexible graphene/silver nanowires substrates using non-thermal laser photoreduction

Badawi Anis et al.

OPTICS AND LASER TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Structural, Optical and Thermal Characterizations of PVA/MAA:EA Polyblend Films

Tellamekala Siddaiah et al.

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2018)

Add to Collection

Article Biochemistry & Molecular Biology

Antibacterial and wound healing properties of chitosan/poly(vinyl alcohol)/zinc oxide beads (CS/PVA/ZnO)

Gutha Yuvaraja et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)

Add to Collection

Article Engineering, Manufacturing

Maximum undeformed equivalent chip thickness for ductile-brittle transition of zirconia ceramics under different lubrication conditions

Min Yang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)

Add to Collection

Article Green & Sustainable Science & Technology

Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy

Shuming Guo et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection

Article Optics

Synthesis of cadmium oxide nanoparticles by pulsed laser ablation in liquid environment

Ayman M. Mostafa et al.

OPTIK (2017)

Add to Collection

Review Materials Science, Multidisciplinary

External field-assisted laser ablation in liquid: An efficient strategy for nanocrystal synthesis and nanostructure assembly

J. Xiao et al.

PROGRESS IN MATERIALS SCIENCE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

A Novel Potassium-Ion-Based Dual-Ion Battery

Bifa Ji et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Applied

Functionalization of chitosan by a free radical reaction: Characterization, antioxidant and antibacterial potential

Maria Jesus Moreno-Vasquez et al.

CARBOHYDRATE POLYMERS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon-Coated Porous Aluminum Foil Anode for High-Rate, Long-Term Cycling Stability, and High Energy Density Dual-Ion Batteries

Xuefeng Tong et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

A Novel Aluminum-Graphite Dual-Ion Battery

Xiaolong Zhang et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Preparation and Characterization of Polyvinyl Alcohol-Chitosan Composite Films Reinforced with Cellulose Nanofiber

Kaiwen Choo et al.

MATERIALS (2016)

Add to Collection

Article Multidisciplinary Sciences

Adsorption of Methylene Blue, Bromophenol Blue, and Coomassie Brilliant Blue by alpha-chitin nanoparticles

Solairaj Dhananasekaran et al.

JOURNAL OF ADVANCED RESEARCH (2016)

Add to Collection

Article Chemistry, Medicinal

Does the Use of Chitosan Contribute to Oxalate Kidney Stone Formation?

Moacir Fernandes Queiroz et al.

MARINE DRUGS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Development of a novel magnetite-chitosan composite for the removal of fluoride from drinking water: adsorption modeling and optimization

Anoushiravan Mohseni-Bandpi et al.

RSC ADVANCES (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Structural and electrical properties of nanometric Ni-Cu ferrites synthesized by citrate precursor method

M. A. Ahmed et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2012)

Add to Collection

Article Biochemistry & Molecular Biology

Determination of the degree of acetylation of chitosan by UV spectrophotometry using dual standards

DS Liu et al.

CARBOHYDRATE RESEARCH (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis of silver-gold alloy nanoparticles by a phase-transfer system

RJ Chimentao et al.

JOURNAL OF MATERIALS RESEARCH (2006)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Commercial aspects of gold applications: From materials science to chemical science

CW Corti et al.

GOLD BULLETIN (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.