☆ 4.7 Article

The influence of Nb addition on the passivity of CoCrNiNbx multi-principal element alloys

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Evolution of Passivity for the Multi-Principal Element Alloy CoCrFeNi with Potential, pH, and Exposure in Chloride Solution

S. Choudhary et al.

Summary: The evolution of passivity of the multi-principal element alloy CoCrFeNi was studied as a function of potential, pH, and exposure duration in 0.1 M NaCl. The results showed that CoCrFeNi exhibited excellent passivity regardless of pH, forming a multi-oxide passive film enriched with Cr(III) oxide. Electrochemical impedance spectroscopy analysis indicated that the passive film thickness and polarization resistance increased with increasing pH and exposure duration. X-ray photoelectron spectroscopy analysis suggested that the fraction of Co(II) and Ni(II) oxides in the passive film, and their contributions to the passivity of the alloy, increased with an increase in the pH of the electrolyte. This study explores the complex synergy between composition, thermodynamics, and kinetics on the resultant passivity of the multi-principal element alloy.

CORROSION (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Research on the high temperature oxidation mechanism of Cr3C2-NiCrCoMo coating for surface remanufacturing

Ji-yu Du et al.

Summary: A novel Cr3C2-NiCrCoMo (NCC) coating with modified multielement alloy adhesive phase was developed to improve the high-temperature oxidation performance of remanufactured coatings. The synergistic effect of multiple alloying phases on the oxidation resistance of coating was explored, showing that NCC coatings have lower oxidation rate, remarkable oxidation resistance, and preferable interface matching between the oxide scale and the coating. The enhanced oxidation resistance is attributed to the formation of multicomponent composite oxide scales within NCC coatings.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Materials Science, Multidisciplinary

The influence of Y and Nb addition on the corrosion resistance of Fe-Cr-Al-Ni model alloys exposed to oxygen-containing molten Pb

Hao Shi et al.

Summary: The corrosion behavior of four different alumina-forming austenitic model alloys in oxygen containing molten Pb at 600 and 650 degrees C has been investigated. One composition with minor additions of Y and Nb and low Ni concentration shows corrosion resistance at 650 degrees C, where Y and Nb have a significant positive influence on the corrosion resistance and phase composition of the alloys.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Interstitial nitrogen enhances corrosion resistance of an equiatomic CoCrNi medium-entropy alloy in sulfuric acid solution

Igor Moravcik et al.

Summary: The nitrogen-alloyed variant of the CoCrNi MEA exhibits higher corrosion resistance, while both nitrogen-free and nitrogen-doped MEAs show lower corrosion current and rates compared to 316L steel. The addition of nitrogen significantly improves the pitting corrosion resistance of CoCrNiN.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Multi-principal element alloys from the CrCoNi family: outlook and perspectives

Francisco G. Coury et al.

Summary: Great research effort is being employed in the development of Multi-Principal Element Alloys (MPEAs), focusing on the vast compositional field they exist in. Among the promising MPEAs, compositions containing large contents of Cr, Co and Ni, like the Cr33Co33Ni33 alloy, show outstanding combination of strength and ductility. The critical review in this work examines the history of MPEA development, phase equilibria, and main studies explaining the good mechanical properties of these alloys, highlighting grain refinement, solid solution strengthening, twinning, and transformation induced plasticity. The review also emphasizes the excellent properties of high Cr-containing alloys in terms of strength, ductility, corrosion resistance, and oxidation resistance, surpassing some Ni-superalloys.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Electrochemistry

Potential Dependent Mn Oxidation and Its Role in Passivation of Ni38Fe20Cr22Mn10Co10 Multi-Principal Element Alloy Using Multi-Element Resolved Atomic Emission Spectroelectrochemistry

Junsoo Han et al.

Summary: The study focuses on a non-equiatomic Ni38Fe20Cr22Mn10Co10 solid solution alloy, showing that Ni dissolves at all investigated potentials, Fe and Co are incorporated into oxides or hydroxides at low concentrations, and Cr and Mn are enriched at passive potentials. At low passivating potentials, Mn(II) dissolves and is incorporated into oxides containing large concentrations of Cr(III).

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Enhancement of high temperature steam oxidation resistance of Zr-1Nb alloy with ZrO2/Cr bilayer coating

Xingping Wang et al.

Summary: The ZrO2/Cr bilayer coating on Zr-1Nb alloy, fabricated by plasma electrolytic oxidation and filtered cathodic vacuum arc deposition duplex treatments, showed excellent steam oxidation resistance, with significantly reduced mass gain compared to the Cr-coated alloy at high temperatures.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of alloying elements (Cu, Ti, Nb) on the microstructure and corrosion behaviour of AlCrFeNi-based high entropy alloys exposed to oxygen-containing molten Pb

Hao Shi et al.

Summary: Corrosion tests in oxygen-containing molten Pb at 600 degrees C indicated that Cu or Ti additions degrade the corrosion resistance of HEAs, while Nb addition showed promising corrosion behavior. After long exposure, all three alloys experienced phase transformations, resulting in the identification of new phases.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A perspective on corrosion of multi-principal element alloys

N. Birbilis et al.

Summary: Metallic alloys are essential for advanced technologies and systems, but corrosion remains a significant challenge. Recent research has identified a class of metallic alloys called multi principal element alloys (MPEAs) with unique physical properties and high resistance to corrosion, potentially expanding their use in harsh environments. Ongoing progress, prospects, and challenges in MPEA research are briefly reviewed with potential future research directions elaborated.

NPJ MATERIALS DEGRADATION (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion resistant nanostructured eutectic high entropy alloy

S. Shuang et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of the passive properties of 254SMO stainless steel in simulated desulfurized flue gas condensates by electrochemical analysis, XPS and ToF-SIMS

Yunpeng Dou et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Crystallography

Pitting Corrosion Resistance on Annealing Treated Super Duplex Stainless Steel S32750

Shuang Liu et al.

CRYSTALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Nb addition on the stability and biological corrosion resistance of Ti-Zr alloy passivation films

P. F. Ji et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Materials Science, Coatings & Films

Corrosion properties of laser cladded CrCoNi medium entropy alloy coating

Kai Feng et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion behavior of CoCrNi medium-entropy alloy compared with 304 stainless steel in H2SO4 and NaOH solutions

Jianying Wang et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Electrochemistry

Element-resolved electrochemical analysis of transpassive dissolution and repassivation behavior of the multi-principal element alloy AlTiVCr

S. Choudhary et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Distribution of Generalized Schmid Factor in Euler Orientation Space and Rollability of AZ31B Alloy with Basal Texture

Baolin Wu et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Passivation behavior and surface chemistry of 2507 super duplex stainless steel in artificial seawater: Influence of dissolved oxygen and pH

Zhongyu Cui et al.

CORROSION SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and properties of CoCrNi medium-entropy alloy produced by gas atomization and spark plasma sintering

Jianying Wang et al.

JOURNAL OF MATERIALS RESEARCH (2019)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of Al and Sc on deformation behavior of FeCoNi multi-element alloys

Rui Zhou et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion behavior of bulk (Zr58Nb3Cu16Ni13Al10)100-xYx (x=0, 0.5, 2.5 at. %) metallic glasses in sulfuric acid

Liusi Yu et al.

CORROSION SCIENCE (2019)

Add to Collection

Article Electrochemistry

Correlation between Passivity Breakdown and Composition of Passive Film Formed on Alloy 690 Studied by Sputtering XPS and FIB-HRTEM

Yicheng Wang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution

Hong Luo et al.

CORROSION SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

A novel quaternary equiatomic Ti-Zr-Nb-Ta medium entropy alloy (MEA)

V. T. Nguyen et al.

INTERMETALLICS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of nitrogen on corrosion behaviour of a novel high nitrogen medium-entropy alloy CrCoNiN manufactured by pressurized metallurgy

Hao Feng et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Comparative study of the surface oxide films on lean duplex and corresponding single phase stainless steels by XPS and ToF-SIMS

Elise Gardin et al.

CORROSION SCIENCE (2018)

Add to Collection

Article Electrochemistry

Electrochemical and Passivation Behavior of Duplex Stainless Steel in Simulated Concrete Pore Solution

Jian Wang et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2017)

Add to Collection

Article Electrochemistry

Effect of Rolling method and Sensitization treatment on the Microstructure and Passive Properties in 2101 Duplex Stainless Steel

Jian Wang et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

High temperature oxidation behaviors of equimolar NbTiZrV and NbTiZrCr refractory complex concentrated alloys (RCCAs)

T. M. Butler et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of prolonged thermal cycles on the pitting corrosion resistance of a newly developed LDX 2404 lean duplex stainless steel

Ziying Zhang et al.

CORROSION SCIENCE (2016)

Add to Collection

Article Physics, Multidisciplinary

MoNbTaV Medium-Entropy Alloy

Hongwei Yao et al.

ENTROPY (2016)

Add to Collection

Article Multidisciplinary Sciences

Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures

Bernd Gludovatz et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Chemistry, Physical

Effects of Nb additions on the microstructure and mechanical property of CoCrFeNi high-entropy alloys

W. H. Liu et al.

INTERMETALLICS (2015)

Add to Collection

Article Chemistry, Physical

The electrochemical behaviour of 316L austenitic stainless steel in Cl- containing environment under different H2S partial pressures

Jinhui Ding et al.

APPLIED SURFACE SCIENCE (2014)

Add to Collection

Article Engineering, Mechanical

Corrosion in water supply pipe stainless steel 304 and a supply line of helium in stainless steel 316

C. M. B. Martins et al.

ENGINEERING FAILURE ANALYSIS (2014)

Add to Collection

Article Chemistry, Physical

Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys

Z. Wu et al.

INTERMETALLICS (2014)

Add to Collection

Article Multidisciplinary Sciences

A fracture-resistant high-entropy alloy for cryogenic applications

Bernd Gludovatz et al.

SCIENCE (2014)

Add to Collection

Article Electrochemistry

Passive and transpassive behaviour of Alloy 31 in a heavy brine LiBr solution

R. M. Fernandez-Domene et al.

ELECTROCHIMICA ACTA (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Processing effects on the magnetic and mechanical properties of FeCoNiAl0.2Si0.2 high entropy alloy

Ting-ting Zuo et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Oxidation behaviour of zirconium alloys and their precipitates - A mechanistic study

C. Proff et al.

JOURNAL OF NUCLEAR MATERIALS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Alloy Design and Properties Optimization of High-Entropy Alloys

Y. Zhang et al.

JOM (2012)

Add to Collection

Article Electrochemistry

The electrochemical behaviour of stainless steel AISI 304 in alkaline solutions with different pH in the presence of chlorides

L. Freire et al.

ELECTROCHIMICA ACTA (2011)

Add to Collection

Article Nanoscience & Nanotechnology

Key factor influencing the ignition resistance of magnesium alloys at elevated temperatures

Young Min Kim et al.

SCRIPTA MATERIALIA (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of pH on the passivation behavior of 254SMO stainless steel in 3.5% NaCl solution

C. T. Liu et al.

CORROSION SCIENCE (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Electrochemical and XPS studies of the passive film formed on stainless steels in borate buffer and chloride solutions

Aleksandra Kocijan et al.

CORROSION SCIENCE (2007)

Add to Collection

Article Electrochemistry

Corrosion characterization of titanium alloys by electrochemical techniques

SL de Assis et al.

ELECTROCHIMICA ACTA (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element

A Takeuchi et al.

MATERIALS TRANSACTIONS (2005)

Add to Collection

Review Electrochemistry

Passive films on stainless steels - chemistry, structure and growth

COA Olsson et al.

ELECTROCHIMICA ACTA (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.