4.7 Article

Effects of waterborne polyurethane on storage stability, rheological properties, and VOCs emission of crumb rubber modified asphalt

Related references

Note: Only part of the references are listed.
Article Green & Sustainable Science & Technology

Comparative Assessment of Asphalt Volatile Organic Compounds Emission from field to laboratory

Na Li et al.

Summary: This study compares the VOCs emission assessment between actual construction sites and laboratory simulations, finding that the composition and content of VOCs in asphalt have significant dependence on heating temperature. Experimental simulations in the laboratory can effectively signal the amount and composition of VOCs released in practical construction sites.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Construction & Building Technology

Rheological properties and aging performance of sulfur extended asphalt modified with recycled polyethylene waste

Yasser M. Alghrafy et al.

Summary: This study found that adding recycled plastic waste (RPW) can improve the rutting and fatigue performance of virgin asphalt and sulfur extended asphalt (SEA). RPW addition can slow down the binder oxidation reactions. RPW has a significant impact on the performance of asphalt.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Green & Sustainable Science & Technology

Recycling fish scale powder in improving the performance of asphalt: A sustainable utilization of fish scale waste in asphalt

Songtao Lv et al.

Summary: This study investigates the effect of fish scale powder (FSP) on the performance of asphalt binders, finding that FSP enhances adhesion, viscoelastic properties, temperature susceptibility, and resistance to permanent deformation of asphalt, with little effect on aging and cracking resistance at low content. The physical mixing between FSP and asphalt binder results in a storage-stable product, indicating promising and feasible utilization of FSP as a bio-modifier for asphalt binders.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Engineering, Environmental

Flue gas composition of waste rubber modified asphalt (WRMA) and effect of deodorants on hazardous constituents and WRMA

Liping Cao et al.

Summary: The paper presents a method for generating and collecting hazardous flue gas during the preparation of waste rubber modified asphalt (WRMA). By incorporating deodorants into WRMA, the stability of waste rubber is improved, reducing the negative impact of harmful emissions and promoting environmental protection.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Construction & Building Technology

Research on the influence of ultraviolet aging on the interfacial cracking characteristics of warm mix crumb rubber modified asphalt mortar

Lan Wang et al.

Summary: UV aging accelerates the interfacial crack growth rate of asphalt mortar, and a proposed interface damage factor can reflect the real-time damage of the asphalt mortar. The crack growth rate and damage degree of warm mix crumb rubber modified asphalt mortar are lower than that of hot mix crumb rubber modified asphalt mortar.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Biochemistry & Molecular Biology

Multiscale mechanisms of asphalt performance enhancement by crumbed waste tire rubber: insight from molecular dynamics simulation

Kui Hu et al.

Summary: This study investigated the mechanism of CWTB modification of asphalt using various analysis methods. The results showed that CWTB enhanced the high temperature performance of the base asphalt, indicating its potential application value.

JOURNAL OF MOLECULAR MODELING (2021)

Article Construction & Building Technology

Investigating compatibility between TPU and bitumen SARA fractions by means of Hansen solubility parameters and interfacial tension measurements

Raissa Gallu et al.

Summary: Hansen solubility parameters and model oils were used to predict the affinity between TPU and the SARA fractions of bitumen, indicating the preferential compatibility between bitumen and the soft block of TPU. Resins play a key role as compatibilizers, affecting the interfacial tension and mechanical properties of TPU-modified bitumens.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Green & Sustainable Science & Technology

Effects of rubber absorption on the aging resistance of hot and warm asphalt rubber binders prepared with waste tire rubber

Danning Li et al.

Summary: The study showed that CRM absorption can hinder the attack of oxygen on bitumen, maintaining a softer environment around the swelling rubber and improving the aging resistance of AR. The incorporation of WMA additives affected the rheological properties of AR but did not compromise its aging resistance.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Green & Sustainable Science & Technology

VOC emissions from asphalt pavement and health risks to construction workers

Peng Cui et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Green & Sustainable Science & Technology

Interaction of spent FCC catalyst and asphalt binder: Rheological properties, emission of VOCs and immobilization of metals

Yongjie Xue et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Construction & Building Technology

Reduce VOCs and PM emissions of warm-mix asphalt using geopolymer additives

Ning Tang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Green & Sustainable Science & Technology

The energy consumption and emission of polyurethane pavement construction based on life cycle assessment

Lin Cong et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Green & Sustainable Science & Technology

Improvements on high-temperature stability, rheology, and stiffness of asphalt binder modified with waste crayfish shell powder

Songtao Lv et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Construction & Building Technology

Rheology-morphology relationships of new polymer-modified bitumen based on thermoplastic polyurethanes (TPU)

Raissa Gallu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Engineering, Environmental

Effects of asphalt source and mixing temperature on the generated asphalt fumes

Shicong Mo et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Article Construction & Building Technology

Effect of different rejuvenators on the rheological properties of aged SBS modified bitumen in long term aging

Zhilong Cao et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Waterborne Epoxy Resin-Polyurethane-Emulsified Asphalt: Preparation and Properties

Guolin Yang et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)

Article Green & Sustainable Science & Technology

VOCs reduction and inhibition mechanisms of using active carbon filler in bituminous materials

Yongshuang Long et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Green & Sustainable Science & Technology

Production of a sustainable paving material through chemical recycling of waste PET into crumb rubber modified asphalt

Zhen Leng et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Chemistry, Multidisciplinary

Potential of Waste Oyster Shells as a Novel Biofiller for Hot-Mix Asphalt

Nader Nciri et al.

APPLIED SCIENCES-BASEL (2018)

Review Green & Sustainable Science & Technology

Environmentally friendly polymer-rubber composites obtained from waste tyres: A review

Maciej Sienkiewicz et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Article Engineering, Civil

METHODS AND CRITERIA FOR EVALUATION OF ASPHALT MIXTURE RESISTANCE TO LOW TEMPERATURE CRACKING

Judita Grazulyte et al.

BALTIC JOURNAL OF ROAD AND BRIDGE ENGINEERING (2017)

Article Construction & Building Technology

Study on the classical and rheological properties of castor oil-polyurethane pre polymer (C-PU) modified asphalt

Lei Xia et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Chemistry, Physical

A review of the fundamentals of polymer-modified asphalts: Asphalt/polymer interactions and principles of compatibility

Giovanni Polacco et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2015)

Article Chemistry, Physical

Synergistic effect of anionic and nonionic monomers on the synthesis of high solid content waterborne polyurethane

Hou Lijie et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2015)

Article Environmental Sciences

Characteristics of volatile organic compounds emission profiles from hot road bitumens

Grzegorz Boczkaj et al.

CHEMOSPHERE (2014)

Article Construction & Building Technology

Study on the deteriorations of bituminous binder resulted from volatile organic compounds emissions

Peiqiang Cui et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Laboratory Investigation of Different Standards of Phase Separation in Crumb Rubber Modified Asphalt Binders

Hakseo Kim et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2013)

Article Chemistry, Applied

Effect of processing on the rheological properties of poly-urethane/urea bituminous products

V. Carrera et al.

FUEL PROCESSING TECHNOLOGY (2010)

Article Construction & Building Technology

Investigation of the properties of asphalt and its mixtures containing flame retardant modifier

Jianying Yu et al.

CONSTRUCTION AND BUILDING MATERIALS (2009)

Article Polymer Science

Polymer/clay nanocomposites as VOC barrier materials and coatings

Jose M. Herrera-Alonso et al.

POLYMER (2009)

Article Energy & Fuels

Rheological effects of waxes in bitumen

Y Edwards et al.

ENERGY & FUELS (2003)