Related references
Note: Only part of the references are listed.Effects of unconventional fly ashes on cementitious paste properties
Ying Wang et al.
CEMENT & CONCRETE COMPOSITES (2022)
Digital fabrication of eco-friendly ultra-high performance fiber-reinforced concrete
Arun R. Arunothayan et al.
CEMENT & CONCRETE COMPOSITES (2022)
Alternative supplementary cementitious materials for sustainable concrete structures: a review on characterization and properties
J. Duchesne
WASTE AND BIOMASS VALORIZATION (2021)
Influence of Waste Tire Rubber Particles Size on the Microstructural, Mechanical, and Acoustic Insulation Properties of 3D-Printable Cement Mortars
Matteo Sambucci et al.
CIVIL ENGINEERING JOURNAL-TEHRAN (2021)
Rheological and pumping behaviour of 3D printable cementitious materials with varying aggregate content
Manu K. Mohan et al.
CEMENT AND CONCRETE RESEARCH (2021)
Flow-based pultrusion of continuous fi bers for cement-based composite material and additive manufacturing: rheological and technological requirements
Leo Demont et al.
COMPOSITE STRUCTURES (2021)
Printability and advantages of 3D printing mortar with 100% recycled sand
Shuai Zou et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Environmental and economic assessment on 3D printed buildings with recycled concrete
Yilong Han et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Digital design computing and modelling for 3-D concrete printing
Vuong Nguyen-Van et al.
AUTOMATION IN CONSTRUCTION (2021)
Synchronized concrete and bonding agent deposition system for interlayer bond strength enhancement in 3D concrete printing
Yiwei Weng et al.
AUTOMATION IN CONSTRUCTION (2021)
A 3D concrete printing prefabrication platform for bespoke columns
Ana Anton et al.
AUTOMATION IN CONSTRUCTION (2021)
Effect of alkali reactions on the rheology of one-part 3D printable geopolymer concrete
Shravan Muthukrishnan et al.
CEMENT & CONCRETE COMPOSITES (2021)
Vibration induced active rheology control for 3D concrete printing
J. G. Sanjayan et al.
CEMENT AND CONCRETE RESEARCH (2021)
Hardened properties and durability of large-scale 3D printed cement-based materials
Yu Zhang et al.
MATERIALS AND STRUCTURES (2021)
Effect of printing parameters on material distribution in spray-based 3D concrete printing (S-3DCP)
Bing Lu et al.
AUTOMATION IN CONSTRUCTION (2021)
Fiber orientation effects on ultra-high performance concrete formed by 3D printing
Arun R. Arunothayan et al.
CEMENT AND CONCRETE RESEARCH (2021)
Experimental characterization of quaternary blended mortar exposed to marine environment using mechanical strength, corrosion resistance and chemical composition
Dodda Srinivas et al.
JOURNAL OF BUILDING ENGINEERING (2021)
Influence of the printing direction and age on the mechanical properties of 3D printed concrete
Behzad Zahabizadeh et al.
MATERIALS AND STRUCTURES (2021)
3D printing eco-friendly concrete containing under-utilised and waste solids as aggregates
Gang Bai et al.
CEMENT & CONCRETE COMPOSITES (2021)
Construction and demolition waste-based geopolymers suited for use in 3-dimensional additive manufacturing
Oguzhan Sahin et al.
CEMENT & CONCRETE COMPOSITES (2021)
Rheology and application of buoyant foam concrete for digital fabrication
Seung Cho et al.
COMPOSITES PART B-ENGINEERING (2021)
Stability of steel slag as fine aggregate and its application in 3D printing materials
Shuo Dai et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Durability assessment and microstructural analysis of 3D printed concrete exposed to sulfuric acid environments
Bilal Baz et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Flexural properties of 3D printed fibre-reinforced concrete with recycled sand
Tao Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Sustainability tradeoffs in the adoption of 3D Concrete Printing in the construction industry
Max Adaloudis et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Experimental measurement on the effects of recycled glass cullets as aggregates for construction 3D printing
Guan Heng Andrew Ting et al.
JOURNAL OF CLEANER PRODUCTION (2021)
3D Concrete Printing: A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics
Atta Ur Rehman et al.
MATERIALS (2021)
Mechanical enhancement for EMW-absorbing cementitious material using 3D concrete printing
Junbo Sun et al.
JOURNAL OF BUILDING ENGINEERING (2021)
Biomass ashes from agricultural wastes as supplementary cementitious materials or aggregate replacement in cement/geopolymer concrete: A comprehensive review
Blessen Skariah Thomas et al.
JOURNAL OF BUILDING ENGINEERING (2021)
3D concrete printer parameter optimisation for high rate digital construction avoiding plastic collapse
Jacques Kruger et al.
COMPOSITES PART B-ENGINEERING (2020)
A desorptivity-based approach for the assessment of phase separation during extrusion of cementitious materials
A. Rahul et al.
CEMENT & CONCRETE COMPOSITES (2020)
Investigation of the properties of alkali-activated slag mixes involving the use of nanoclay and nucleation seeds for 3D printing
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2020)
Real-time quantification of fresh and hardened mechanical property for 3D printing material by intellectualization with piezoelectric transducers
Guowei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Yield stress criteria to assess the buildability of 3D concrete printing
R. Jayathilakage et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Mechanical Behavior of Printed Strain Hardening Cementitious Composites
Stefan Chaves Figueiredo et al.
MATERIALS (2020)
Mechanical behavior of 3D printed mortar with recycled sand at early ages
Tao Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Preparation and microstructural characterization of a novel 3D printable building material composed of copper tailings and iron tailings
Xinjian Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Influence of multi-walled nanotubes on the fresh and hardened properties of a 3D printing PVA mortar ink
Xiaoyan Sun et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Steel fibres reinforced 3D printed concrete: Influence of fibre sizes on mechanical performance
Luong Pham et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Setting on demand for digital concrete - Principles, measurements, chemistry, validation
Lex Reiter et al.
CEMENT AND CONCRETE RESEARCH (2020)
Study of MgO-activated slag as a cementless material for sustainable spray-based 3D printing
Bing Lu et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Comparative economic, environmental and productivity assessment of a concrete bathroom unit fabricated through 3D printing and a precast approach
Yiwei Weng et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Fresh Properties of Cementitious Materials Containing Rice Husk Ash for Construction 3D Printing
Shravan Muthukrishnan et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2020)
Inspecting manufacturing precision of 3D printed concrete parts based on geometric dimensioning and tolerancing
Jie Xu et al.
AUTOMATION IN CONSTRUCTION (2020)
A critical examination of the influence of material characteristics and extruder geometry on 3D printing of cementitious binders
Sooraj A. O. Nair et al.
CEMENT & CONCRETE COMPOSITES (2020)
Comparison of the effects that supplementary cementitious materials replacement levels have on cementitious paste properties
Sivakumar Ramanathan et al.
CEMENT & CONCRETE COMPOSITES (2020)
Hardened properties of layered 3D printed concrete with recycled sand
Tao Ding et al.
CEMENT & CONCRETE COMPOSITES (2020)
Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction
Arun R. Arunothayan et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
A rheology-based quasi-static shape retention model for digitally fabricated concrete
Jacques Kruger et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Environmental assessment of large-scale 3D printing in construction: A comparative study between cob and concrete
Hashem Alhumayani et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Bond properties of reinforcing bar penetrations in 3D concrete printing
Taylor Marchment et al.
AUTOMATION IN CONSTRUCTION (2020)
Layer-interface properties in 3D printed concrete: Dual hierarchical structure and micromechanical characterization
Zifan Geng et al.
CEMENT AND CONCRETE RESEARCH (2020)
Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing
Shravan Muthukrishnan et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
3D Concrete Printing Sustainability: A Comparative Life Cycle Assessment of Four Construction Method Scenarios
Malek Mohammad et al.
BUILDINGS (2020)
Examining the significance of infill printing pattern on the anisotropy of 3D printed concrete
Daniel Heras Murcia et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
3D recycled mortar printing: System development, process design, material properties and on-site printing
Jianzhuang Xiao et al.
JOURNAL OF BUILDING ENGINEERING (2020)
Properties of a double-layer EMW-absorbing structure containing a graded nano-sized absorbent combing extruded and sprayed 3D printing
Junbo Sun et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Electromagnetic wave absorbing performance of 3D printed wave-shape copper solid cementitious element
Junbo Sun et al.
CEMENT & CONCRETE COMPOSITES (2020)
Plastic shrinkage cracking in 3D printed concrete
Gerrit M. Moelich et al.
COMPOSITES PART B-ENGINEERING (2020)
Inline quantification of extrudability of cementitious materials for digital construction
V. N. Nerella et al.
CEMENT & CONCRETE COMPOSITES (2019)
3D printable concrete: Mixture design and test methods
A. V. Rahul et al.
CEMENT & CONCRETE COMPOSITES (2019)
Mixture Design Approach to optimize the rheological properties of the material used in 3D cementitious material printing
Zhixin Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Utilization of recycled glass for 3D concrete printing: rheological and mechanical properties
Guan Heng Andrew Ting et al.
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2019)
Direct shear test for the assessment of rheological parameters of concrete for 3D printing applications
Roshan Jayathilakage et al.
MATERIALS AND STRUCTURES (2019)
Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application
Biranchi Panda et al.
MATERIALS LETTERS (2019)
Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2019)
Mechanical properties and deformation behaviour of early age concrete in the context of digital construction
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2019)
Experimental methods to determine the feasibility of steel slags as supplementary cementitious materials
Ying Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Comparative sustainability assessment of binary blended concretes using Supplementary Cementitious Materials (SCMs) and Ordinary Portland Cement (OPC)
Kamel Mohamed Rahla et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing
Biranchi Panda et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Designing spray-based 3D printable cementitious materials with fly ash cenosphere and air entraining agent
Bing Lu et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete
Biranchi Panda et al.
MATERIALS (2019)
Extending supplementary cementitious material resources: Reclaimed and remediated fly ash and natural pozzolans
Ivan Diaz-Loya et al.
CEMENT & CONCRETE COMPOSITES (2019)
3D concrete printing: A lower bound analytical model for buildability performance quantification
Jacques Kruger et al.
AUTOMATION IN CONSTRUCTION (2019)
New insights from reactivity testing of supplementary cementitious materials
Prannoy Suraneni et al.
CEMENT & CONCRETE COMPOSITES (2019)
Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2019)
Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing
Yiwei Weng et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
An ab initio approach for thixotropy characterisation of (nanoparticle-infused) 3D printable concrete
Jacques Kruger et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Microstructural Characterization of 3D Printed Cementitious Materials
Jolien Van Der Putten et al.
MATERIALS (2019)
Strain-based approach for measuring structural build-up of cement pastes in the context of digital construction
V. N. Nerella et al.
CEMENT AND CONCRETE RESEARCH (2019)
Rheology and buildability of sustainable cement-based composites containing micro-crystalline cellulose for 3D-printing
Wu-Jian Long et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Printability and fire performance of a developed 3D printable fibre reinforced cementitious composites under elevated temperatures
Yiwei Weng et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
Properties of cement grout modified with ultra-fine slag
Sowmini Gopinathan et al.
FRONTIERS OF STRUCTURAL AND CIVIL ENGINEERING (2018)
Fresh and hardened properties of 3D printable cementitious materials for building and construction
Suvash Chandra Paul et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2018)
A self-reinforced cementitious composite for building-scale 3D printing
Daniel G. Soltan et al.
CEMENT & CONCRETE COMPOSITES (2018)
The role of early age structural build-up in digital fabrication with concrete
Lex Reiter et al.
CEMENT AND CONCRETE RESEARCH (2018)
Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry
Karen L. Scrivener et al.
CEMENT AND CONCRETE RESEARCH (2018)
Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing
Biranchi Panda et al.
CERAMICS INTERNATIONAL (2018)
Fresh properties of a novel 3D printing concrete ink
Yu Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement
Jian Hui Lim et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of mineral admixtures on the structural build-up of cement paste
Qiang Yuan et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Printable properties of cementitious material containing copper tailings for extrusion based 3D printing
Guowei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
3D-printed steel reinforcement for digital concrete construction - Manufacture, mechanical properties and bond behaviour
Viktor Mechtcherine et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model
Yiwei Weng et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Measurement of tensile bond strength of 3D printed geopolymer mortar
Biranchi Panda et al.
MEASUREMENT (2018)
Method for the Enhancement of Buildability and Bending Resistance of 3D Printable Tailing Mortar
Zhijian Li et al.
INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2018)
Electromagnetic and microwave absorbing properties of cementitious composite for 3D printing containing waste copper solids
Guowei Ma et al.
CEMENT & CONCRETE COMPOSITES (2018)
Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing
Yiwei Weng et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Field trials with concrete incorporating biomass-fly ash
Ahmed Omran et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
Biranchi Panda et al.
CEMENT & CONCRETE COMPOSITES (2018)
Characterization of supplementary cementitious materials by thermal analysis
Susan A. Bernal et al.
MATERIALS AND STRUCTURES (2017)
Environmental design guidelines for digital fabrication
Isolda Agusti-Juan et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Additive manufacturing of geopolymer for sustainable built environment
Biranchi Panda et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Biranchi Panda et al.
MATERIALS LETTERS (2017)
Towards sustainable concrete
Paulo J. M. Monteiro et al.
NATURE MATERIALS (2017)
Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture
Ali Kazemian et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Experimental study on flexural behaviour of inorganic polymer concrete beams reinforced with basalt rebar
Xiaochun Fan et al.
COMPOSITES PART B-ENGINEERING (2016)
Readily implementable techniques can cut annual CO2 emissions from the production of concrete by over 20%
Sabbie A. Miller et al.
ENVIRONMENTAL RESEARCH LETTERS (2016)
Recent advances in understanding the role of supplementary cementitious materials in concrete
Maria C. G. Juenger et al.
CEMENT AND CONCRETE RESEARCH (2015)
Understanding the Filler Effect on the Nucleation and Growth of C-S-H
E. Berodier et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)
The Filler Effect: The Influence of Filler Content and Surface Area on Cementitious Reaction Rates
Tandre Oey et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2013)
Hardened properties of high-performance printing concrete
T. T. Le et al.
CEMENT AND CONCRETE RESEARCH (2012)
The influence of small particle on the fluidity of blast furnace slag cement paste containing superplasticizers
Stefania Grzeszczyk et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Mix design and fresh properties for high-performance printing concrete
T. T. Le et al.
MATERIALS AND STRUCTURES (2012)
Supplementary cementitious materials
Barbara Lothenbach et al.
CEMENT AND CONCRETE RESEARCH (2011)
Comprehensive phase characterization of crystalline and amorphous phases of a Class F fly ash
Ryan T. Chancey et al.
CEMENT AND CONCRETE RESEARCH (2010)
Chloride chemical form in various types of fly ash
Fenfen Zhu et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2008)
Alkali release characteristics of blended cements
MH Shehata et al.
CEMENT AND CONCRETE RESEARCH (2006)
Automated construction by contour crafting - related robotics and information technologies
B Khoshnevis
AUTOMATION IN CONSTRUCTION (2004)
Effect of silica fume on mechanical properties of high-strength concrete
M Mazloom et al.
CEMENT & CONCRETE COMPOSITES (2004)
Limestone filler cement in low w/c concrete:: A rational use of energy
V Bonavetti et al.
CEMENT AND CONCRETE RESEARCH (2003)
A new way to increase the long-term bond strength of new-to-old concrete by the use of fly ash
GY Li
CEMENT AND CONCRETE RESEARCH (2003)
The influence of mineral admixtures on the theology of cement paste and concrete
CF Ferraris et al.
CEMENT AND CONCRETE RESEARCH (2001)
The effect of fly ash composition on the expansion of concrete due to alkali-silica reaction
MH Shehata et al.
CEMENT AND CONCRETE RESEARCH (2000)