Related references
Note: Only part of the references are listed.Microwave pyrolysis of polyethylene terephthalate (PET) plastic bottle sheets for energy recovery
Yifan Liu et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2022)
Microwave-assisted pyrolysis of polystyrene for aviation oil production
Sichen Fan et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2022)
Co-pyrolysis of polymer waste and carbon-based matter as an alternative for waste management in the developing world
Duna Phakedi et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2021)
Eulerian CFD analysis of clustering gas-solid flows in fluidized bed pyrolysis reactors
Atta Ullah et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2021)
CFD-DEM Simulation of Biomass Pyrolysis in Fluidized-Bed Reactor with a Multistep Kinetic Scheme
Tao Chen et al.
ENERGIES (2020)
Coal and biomass co-pyrolysis in a fluidized-bed reactor: Numerical assessment of fuel type and blending conditions
Tamer M. Ismail et al.
FUEL (2020)
A Review of Recent Advances in Biomass Pyrolysis
Guanyu Wang et al.
ENERGY & FUELS (2020)
Process intensification of biomass fast pyrolysis through autothermal operation of a fluidized bed reactor
Joseph P. Polin et al.
APPLIED ENERGY (2019)
Comprehensive investigation and comparison of TFM, DenseDPM and CFD-DEM for dense fluidized beds
Peter Ostermeier et al.
CHEMICAL ENGINEERING SCIENCE (2019)
Microwave-assisted co-pyrolysis of brown coal and corn stover for oil production
Yaning Zhang et al.
BIORESOURCE TECHNOLOGY (2018)
EMMS mixture model with size distribution for two-fluid simulation of riser flows
Atta Ullah et al.
PARTICUOLOGY (2018)
Fine-Grid Eulerian Simulation of Sedimenting Particles: Liquid-Solid and Gas-Solid Systems
Muhammad Zaheer et al.
JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN (2017)
A Study of the Mixing Index in Solid Particles
Shih-Hao Chou et al.
KONA POWDER AND PARTICLE JOURNAL (2017)
CFD simulations of gas-solid flow in an industrial-scale circulating fluidized bed furnace using subgrid-scale drag models
Srujal Shah et al.
PARTICUOLOGY (2015)
A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil
Faisal Abnisa et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Evaluation of drag models for cocurrent and countercurrent gas-solid flows
Atta Ullah et al.
CHEMICAL ENGINEERING SCIENCE (2013)
Generalized Fluidization Revisited
Atta Ullah et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)
Validation Studies on Filtered Model Equations for Gas-Particle Flows in Risers
Yesim Igci et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)
Biomass Pyrolysis and Gasification of Varying Particle Sizes in a Fluidized-Bed Reactor
Katherine R. Gaston et al.
ENERGY & FUELS (2011)
On the effect of cluster resolution in riser flows on momentum and reaction kinetic interaction
Schalk Cloete et al.
POWDER TECHNOLOGY (2011)
Influence of particle size on pyrolysis and gasification performance of municipal solid waste in a fixed bed reactor
Siyi Luo et al.
BIORESOURCE TECHNOLOGY (2010)
A model for cluster size in risers
Duvvuri Subbarao
POWDER TECHNOLOGY (2010)
Particle clusters in and above fluidized beds
Ray Cocco et al.
POWDER TECHNOLOGY (2010)
CFD modelling of the fast pyrolysis of biomass in fluidised bed reactors. Part B Heat, momentum and mass transport in bubbling fluidised beds
K. Papadikis et al.
CHEMICAL ENGINEERING SCIENCE (2009)
Searching for a mesh-independent sub-grid model for CFD simulation of gas-solid riser flows
Bona Lu et al.
CHEMICAL ENGINEERING SCIENCE (2009)
Simulation of gas-solid two-phase flow by a multi-scale CFD approach - Extension of the EMMS model to the sub-grid level
Wei Wang et al.
CHEMICAL ENGINEERING SCIENCE (2007)
Numerical study of particle cluster flow in risers with cluster-based approach
HL Lu et al.
CHEMICAL ENGINEERING SCIENCE (2005)
Coarse-grid simulation of gas-particle flows in vertical risers
AT Andrews et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2005)
The role of meso-scale structures in rapid gas-solid flows
K Agrawal et al.
JOURNAL OF FLUID MECHANICS (2001)
Axial and radial solids distribution in a long and high-flux CFB riser
JH Pärssinen et al.
AICHE JOURNAL (2001)
Mixing and characterization of feedstock for powder injection molding
R Supati et al.
MATERIALS LETTERS (2000)
Parametric effects of particle size and gas velocity on cluster characteristics in fast fluidized beds
AK Sharma et al.
POWDER TECHNOLOGY (2000)