Related references
Note: Only part of the references are listed.Microstructures and strengthening mechanisms of high Fe containing Al-Mg-Si-Mn-Fe alloys with Mg, Si and Mn modified
Yu Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Characterization of externally solidified crystals in a high-pressure die-cast AlSi10MnMg alloy and their effect on porosities and mechanical properties
X. Y. Jiao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Characteristics of Fe-rich intermetallics compounds and their in fl uence on the cracking behavior of a newly developed high-pressure die cast Al-4Mg-2Fe alloy
Chaofeng Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Growth dynamics of faceted Al13Fe4 intermetallic revealed by high-speed synchrotron X-ray quantification
Zihan Song et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Defect-correlated fatigue resistance of additively manufactured Al-Mg4.5Mn alloy with in situ micro-rolling
Cheng Xie et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
The development of low-temperature heat-treatable high-pressure die-cast Al-Mg-Fe-Mn alloys with Zn
Xiangzhen Zhu et al.
JOURNAL OF MATERIALS SCIENCE (2021)
Nucleation and growth of Fe-rich phases in Al-5Ti-1B modified Al-Fe alloys investigated using synchrotron X-ray imaging and electron microscopy
Yuliang Zhao et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Suppressing atomic diffusion with the Schwarz crystal structure in supersaturated Al-Mg alloys
W. Xu et al.
SCIENCE (2021)
Effects of Mg addition on the Al6(Fe,Mn) intermetallic compounds and the grain refinement of α-Al in Al-Fe-Mn alloys
Zhongping Que et al.
MATERIALS CHARACTERIZATION (2021)
In-situ X-ray radiography of primary Fe-rich intermetallic compound formation
Shikang Feng et al.
ACTA MATERIALIA (2020)
Atomistic study of grain-boundary segregation and grain-boundary diffusion in Al-Mg alloys
R. K. Koju et al.
ACTA MATERIALIA (2020)
Multiscale characterization of the nucleation and 3D structure of Al3Sc phases using electron microscopy and synchrotron X-ray tomography
Yuliang Zhao et al.
MATERIALS CHARACTERIZATION (2020)
Heterogeneous nucleation and phase transformation of Fe-rich intermetallic compounds in Al-Mg-Si alloys
Zhongping Que et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Formation of intermetallic phases during solidification in Al-Mg-Mn 5xxx alloys with various Mg levels
Ahmed Y. Algendy et al.
17TH INTERNATIONAL CONFERENCE ON ALUMINIUM ALLOYS 2020 (ICAA17) (2020)
Effects of Mg contents on the microstructure evolution and Fe-bearing phase selection of Al-Mg-Si-Fe alloys under sub-rapid solidification
Ze-Tian Liu et al.
MATERIALIA (2020)
The effect of Fe-rich intermetallics on crack initiation in cast aluminium: An in-situ tensile study
Anton Bjurenstedt et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Synchrotron X-ray tomography investigation of 3D morphologies of intermetallic phases and pores and their effect on the mechanical properties of cast Al-Cu alloys
Yuliang Zhao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Developing high performance mechanical properties at elevated temperature in squeeze cast Al-Cu-Mn-Fe-Ni alloys
Bo Lin et al.
MATERIALS CHARACTERIZATION (2019)
Effect of Sc and Zr on Al-6(Mn,Fe) Phase in Al-Mg-Mn Alloys
Xier Luo et al.
MATERIALS TRANSACTIONS (2019)
Microstructure characteristics and mechanical properties of new aerospace Al-Mg-Mn alloys with Al3(Sc1-x Zrx) or Al3(Er1-xZrx) nanoparticles
Ying Deng et al.
MATERIALS CHARACTERIZATION (2019)
3D characterization of ultrasonic melt processing on the microstructural refinement of Al-Cu alloys using synchrotron X-ray tomography
Yuliang Zhao et al.
MATERIALS CHARACTERIZATION (2019)
Effect of Zr, Cr and Sc on the Al-Mg-Si-Mn high-pressure die casting alloys
O. Prach et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of Cooling Rate on Microstructure and Mechanical Properties of Sand-Casted Al-5.0Mg-0.6Mn-0.25Ce Alloy
Hua-Ping Tang et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2019)
Effect of Cu addition on microstructures and tensile properties of high pressure die-casting Al-5.5Mg-0.7Mn alloy
Lingyang Yuan et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Effect of Si on Fe-rich intermetallic formation and mechanical properties of heat-treated Al-Cu-Mn-Fe alloys
Yuliang Zhao et al.
JOURNAL OF MATERIALS RESEARCH (2018)
The formation mechanism of Al6(Fe, Mn) in die-cast Al-Mg alloys
Xiangzhen Zhu et al.
CRYSTENGCOMM (2018)
Strengthening die-cast Al-Mg and Al-Mg-Mn alloys with Fe as a beneficial element
Xiangzhen Zhu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
In Situ Observation of the Zr Poisoning Effect in Al Alloys Inoculated by Al-Ti-B
Yiwang Jia et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
3D characterisation of the Fe-rich intermetallic phases in recycled Al alloys by synchrotron X-ray microtomography and skeletonisation
Y. Zhao et al.
SCRIPTA MATERIALIA (2018)
Effect of Si addition and applied pressure on microstructure and tensile properties of as-cast Al-5.0Cu-0.6Mn-1.2Fe alloys
Wei-wen Zhang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2018)
Characterization of the morphology of primary silicon particles using synchrotron X-ray tomography
J. Wang et al.
MATERIALS CHARACTERIZATION (2017)
Control of second-phase particles in the Al-Mg-Mn alloy AA 5083
Olaf Engler et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
The influence of Mn on the microstructure and mechanical properties of the Al-5Mg-Mn alloy solidified under near-rapid cooling
Yulin Liu et al.
JOURNAL OF MATERIALS RESEARCH (2016)
Effect of Fe, Si and Cooling Rate on the Formation of Fe- and Mn-rich Intermetallics in Al-5Mg-0.8Mn Alloy
Yulin Liu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2016)
The Al-Rich Part of the Fe-Al Phase Diagram
Xiaolin Li et al.
JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION (2016)
Effect of Mn and Fe on the Formation of Fe- and Mn-Rich Intermetallics in Al-5Mg-Mn Alloys Solidified Under Near-Rapid Cooling
Yulin Liu et al.
MATERIALS (2016)
3D quantitative analysis of graphite morphology in high strength cast iron by high-energy X-ray tomography
Chihpin Chuang et al.
SCRIPTA MATERIALIA (2015)
Influence of a new kind of Al-Ti-C master alloy on the microstructure and mechanical properties of Al-5Cu alloy
Tao Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
In-situ Observation of Tensile Fracture in A357 Casting Alloys
Zhongwei Chen et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2014)
Effect of solution heat treatment on the internal architecture and compressive strength of an AlMg4.7Si8 alloy
D. Tolnai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effect of iron on the microstructure and mechanical property of Al-Mg-Si-Mn and Al-Mg-Si diecast alloys
Shouxun Ji et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Microstructure and Tensile Properties of Wrought Al Alloy 5052 Produced by Rheo-Squeeze Casting
Shulin Lu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Effect of pressure on solidification of metallic materials
J. J. Sobczak et al.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2012)
PITRE: software for phase-sensitive X-ray image processing and tomography reconstruction
Rong-Chang Chen et al.
JOURNAL OF SYNCHROTRON RADIATION (2012)
Sub-micrometre holotomographic characterisation of the effects of solution heat treatment on an AlMg7.3Si3.5 alloy
D. Tolnai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Development of a super ductile diecast Al-Mg-Si alloy
S. Ji et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Real-Time Radiographic Observation of Solidification Behavior of Al-Si-Cu Casting Alloys with the Variation of Iron Content
Bonghwan Kim et al.
MATERIALS TRANSACTIONS (2012)
Curvature of micropores in Al-Cu alloys: An X-ray tomography study
M. Felberbaum et al.
ACTA MATERIALIA (2011)
The kinetics of Fe-rich intermetallic formation in aluminium alloys: In situ observation
Junsheng Wang et al.
SCRIPTA MATERIALIA (2009)
Damage by eutectic particle cracking in aluminum casting alloys A356/357
QG Wang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2003)
Die soldering: Mechanism of the interface reaction between molten aluminum alloy and tool steel
S Shankar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2002)