☆ 4.7 Article

Effects of hollow carbon nanospheres on combustion performance of Al/Fe2O3-based nanothermite sticks

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Direct ink writing of nAl/pCuO/HPMC with outstanding combustion performance and ignition performance

Jianyong Xu et al.

Summary: Direct ink writing has enabled the preparation of energetic inks like nAl/pCuO/HPMC, which significantly influence printing accuracy and reaction performance. The content of HPMC in the ink is a key factor that affects ignition performance and pressure behavior.

COMBUSTION AND FLAME (2022)

Add to Collection

Article Engineering, Environmental

Reactivity of nanothermite-based micro energetic sticks prepared by direct ink writing

Chuanhao Xu et al.

Summary: This study investigates the laser ignition and combustion propagation behavior of energetic sticks at the micro scale, prepared through a direct ink writing (DIW) platform. The relationship between stick diameter and laser ignition threshold is nearly linear and dominated by reactant characteristics. Most energetic sticks can have their combustion velocities regulated by modulating the diameter, but combustion termination may occur under certain conditions. The combustion velocity-stick diameter curves exhibit plateaus with diverse ranges, and the samples have different capabilities in terms of turning corners and jumping ignition at specific diameters.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Engineering, Manufacturing

Joining and welding with a nanothermite and exothermic bonding using reactive multi-nanolayers - A review

David M. B. Dombroski et al.

Summary: This paper mainly introduces the application of nanothermite in joining and welding, discusses the key properties of exothermic joining/welding with internal or external energetic source, investigates further works on reactive bonding, discusses some emerging applications, summarily presents the limitations of current solutions, and provides the potential for future development.

JOURNAL OF MANUFACTURING PROCESSES (2022)

Add to Collection

Article Thermodynamics

Superior performance of quaternary NC/GO/Al/KClO4 nanothermite for high speed impulse small-scale propulsion applications

Ahmed Fahd et al.

Summary: By introducing nitrocellulose (NC) into nanothermites, significant enhancements in combustion performance, including thrust output, specific and volumetric impulses, and total heat released, are achieved. Thermal analysis suggests that the addition of NC introduces another step in the GO/Al/KClO4 reaction, with the liquid-liquid phase diffusion reaction increasing with NC percentage. Electrospinning is a simple technique for preparing quaternary nanothermites that results in improved combustion performance and enhanced suitability for small-scale propulsion applications.

COMBUSTION AND FLAME (2021)

Add to Collection

Article Materials Science, Biomaterials

Additive manufacturing of the core template for the fabrication of an artificial blood vessel: the relationship between the extruded deposition diameter and the filament/nozzle transition ratio

Seong Je Park et al.

Summary: An artificial blood vessel with a tubular structure was manufactured using FDM technology, where the inner core was removed via sonication and hydrogen peroxide. The relationship between extruded deposition diameter and filament/nozzle transition ratio had a significant impact on the final product quality, while the PDMS displayed good chemical stability in hydrogen peroxide.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Add to Collection

Article Chemistry, Physical

Facile synthesis of high tightly ordered Al/CuO core-shell nanowire arrays and the effect of surface density on combustion

Haifeng Yang et al.

Summary: The CuO nanowires prepared by electrochemical and chemical etching methods have high surface density and a homogeneous structure, beneficial for the contact between Al and CuO. The nano-thermite prepared by electrochemical-sputtering method shows 8 times heat release per unit area compared to the chemical-sputtering method, with significantly reduced activation energy and easier ignition.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Highly active catalysts based on 3D hierarchically ordered porous carbon with entrapped Fe2O3 nanoparticles for the thermal decomposition of ammonium perchlorate

Jin Chen et al.

Summary: The study focuses on three-dimensional hierarchically ordered porous carbon/Fe2O3 composite scaffolds with high catalytic activity for ammonium perchlorate (AP) thermal decomposition. The scaffolds show excellent ability to decrease the HTD peak temperature, lower the activation energy, and increase the heat release of AP.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Physics, Applied

3D printing of hollow fiber nanothermites with cavity-mediated self-accelerating combustion

Lin Zhong et al.

Summary: Researchers have discovered the unexpected self-accelerating combustion phenomenon of hollow fiber nanothermite and demonstrated its significant improvement in combustion rate and propagation process, opening up new possibilities for the applications of 3D printing and nanothermite materials.

JOURNAL OF APPLIED PHYSICS (2021)

Add to Collection

Article Chemistry, Physical

Pushing the Limits of Energy Performance in Micron-Sized Thermite: Core-Shell Assembled Liquid Metal-Modified Al@Fe2O3 Thermites

An Chen et al.

Summary: A new type of micron-sized core-shell gallium-based liquid metal-modified Al@Fe2O3 thermite was developed, with high energy density and low laser ignition energy. The characteristics of GLM-Al@Fe2O3 were analyzed by DSC and gas pycnometer, demonstrating a new strategy to improve thermite performance and ensure ESD safety.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Thermodynamics

Connecting agglomeration and burn rate in a thermite reaction: Role of oxidizer morphology

Haiyang Wang et al.

Summary: Agglomeration of aluminum particles is commonly observed in solid propellants and pyrotechnics, playing a key role in combustion performance. In a study on Al/CuO reaction, using microwire oxidizer resulted in higher propagation velocities and agglomerate sizes closer to nanoparticles. Adding polymer slowed down burn rates, allowing detailed observation of agglomeration process.

COMBUSTION AND FLAME (2021)

Add to Collection

Article Thermodynamics

Rational design of gradient structured fluorocarbon/Al composites towards tunable combustion performance

Yaofeng Mao et al.

Summary: The gradient structured PTFE/Al composite material, designed and constructed using 3D printing technology, allows for precise control of combustion reaction and energy output performance. By varying the diameter and mass gradient, the material exhibits improved reaction heat and burning rate.

COMBUSTION AND FLAME (2021)

Add to Collection

Article Engineering, Chemical

Effects of metal oxide nanoparticles on combustion and gas-generating performance of NaN3/Al composite powders ignited using a microhotplate platform

Ho Sung Kim et al.

ADVANCED POWDER TECHNOLOGY (2020)

Add to Collection

Article Thermodynamics

Droplet combustion of kerosene augmented by stabilized nanoaluminum/oxidizer composite mesoparticles

Philip M. Guerieri et al.

COMBUSTION AND FLAME (2020)

Add to Collection

Article Thermodynamics

Experimental observation of the heat transfer mechanisms that drive propagation in additively manufactured energetic materials

Dylan J. Kline et al.

COMBUSTION AND FLAME (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Facile Deflagration Synthesis of Hollow Carbon Nanospheres with Efficient Performance for Solar Water Evaporation

Haifeng Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Core-Shell Structured Nanoenergetic Materials: Preparation and Fundamental Properties

Xiaoxia Ma et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Thermodynamics

New coordination complexes-based gas-generating energetic composites

Tao Wu et al.

COMBUSTION AND FLAME (2020)

Add to Collection

Article Engineering, Manufacturing

Additive manufacturing of a shift block via laser powder bed fusion: the simultaneous utilisation of optimised topology and a lattice structure

Sang Hoon Kim et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Integration of Gold Nanoparticles to Modulate the Ignitability of Nanothermite Films

Baptiste Julien et al.

ACS APPLIED NANO MATERIALS (2020)

Add to Collection

Article Engineering, Environmental

Facile production of NaIO4-encapsulated nanoAl microsphere as green primary explosive and its thermodynamic research

Zaoyan Wan et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Thermodynamics

In situ observations of reacting Al/Fe2O3 thermite: Relating dynamic particle size to macroscopic burn time

Michael D. Grapes et al.

COMBUSTION AND FLAME (2019)

Add to Collection

Article Thermodynamics

Preparation and characterization of the Al/Fe2O3/RDX/NC nanocomposites by electrospray

Hongtao Yang et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Multidisciplinary Sciences

In-operando high-speed microscopy and thermometry of reaction propagation and sintering in a nanocomposite

Haiyang Wang et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Applied

Environment-Friendly Formation of High Energetic Nano-Al/Fe2O3 Bilayer by Aqueous Electrophoretic Deposition

Daixiong Zhang et al.

PROPELLANTS EXPLOSIVES PYROTECHNICS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Fabrication and thermal behavior of Al/Fe2O3 energetic composites for effective interfacial bonding between dissimilar metallic substrates

Ji Hoon Kim et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2019)

Add to Collection

Review Chemistry, Applied

Nanothermites: A short Review. Factsheet for Experimenters, Present and Future Challenges

Marc Comet et al.

PROPELLANTS EXPLOSIVES PYROTECHNICS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Architecture Can Significantly Alter the Energy Release Rate from Nanocomposite Energetics

Haiyang Wang et al.

ACS APPLIED POLYMER MATERIALS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Highly Reactive Metastable Intermixed Composites (MICs): Preparation and Characterization

Wei He et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Thermodynamics

Tuning the ignition and combustion properties of nanoenergetic materials by incorporating with carbon black nanoparticles

Ho Sung Kim et al.

COMBUSTION AND FLAME (2018)

Add to Collection

Article Physics, Applied

High speed 2-dimensional temperature measurements of nanothermite composites: Probing thermal vs. Gas generation effects

Rohit J. Jacob et al.

JOURNAL OF APPLIED PHYSICS (2018)

Add to Collection

Article Thermodynamics

Reaction mechanism of Al-CuO nanothermites with addition of multilayer graphene

Jinpeng Shen et al.

THERMOCHIMICA ACTA (2018)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Electrostatic interactions for directed assembly of high performance nanostructured energetic materials of Al/Fe2O3/multi-walled carbon nanotube (MWCNT)

Tianfu Zhang et al.

JOURNAL OF SOLID STATE CHEMISTRY (2016)

Add to Collection

Article Thermodynamics

Effects of nano-Ag on the combustion process of Al-CuO metastable intermolecular composite

Jinpeng Shen et al.

APPLIED THERMAL ENGINEERING (2014)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Dependence of catalytic properties of Al/Fe2O3 thermites on morphology of Fe2O3 particles in combustion reactions

Ningning Zhao et al.

JOURNAL OF SOLID STATE CHEMISTRY (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Electrophoretic deposition and characterization of nano-Al/Fe2O3 thermites

Daixiong Zhang et al.

MATERIALS LETTERS (2014)

Add to Collection

Article Education, Scientific Disciplines

Calibration and temperature profile of a tungsten filament lamp

Charles de Izarra et al.

EUROPEAN JOURNAL OF PHYSICS (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.