☆ 4.7 Article

The microstructures and mechanical properties of hybrid in-situ AlN-TiC-TiN-Al3Ti/Al reinforced Al-Cu-Mn-Ti alloy matrix composites

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Optimizing microstructure, shrinkage defects and mechanical performance of ZL205A alloys via coupling travelling magnetic fields with unidirectional solidification

Lei Luo et al.

Summary: By coupling travelling magnetic fields (TMF) with unidirectional solidification, it is possible to optimize the microstructure of ZL205A alloys at different stages of the solidification process, leading to improvements in mechanical properties. The use of downward TMF with unidirectional solidification can refine and uniform the microstructure, decrease formation of precipitation, and increase ultimate tensile strength, yield strength, elongation, and hardness. However, upward TMF can have negative effects on the microstructure and overall performance of the alloys.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Hybrid reinforced aluminum matrix composites fabricated by selective laser melting

Hailong Liao et al.

Summary: In this study, near full density and crack-free hybrid aluminum matrix composites (HAMCs) reinforced with Cr3C2 ceramic particles and Ni-Cr trace elements were successfully fabricated using selective laser melting (SLM). The incorporation of trace elements Ni and Cr led to the formation of various intermetallic compounds, providing significant precipitation strengthening effect. The load transfer from matrix to the reinforcing particles and the formation of acicular Al4C3 at the interface between Cr3C2 and the matrix played important roles in strengthening the metal matrix composites. The HAMCs exhibited a 32% increase in microhardness and a 22% increase in compressive strength, but a significant reduction (26%) in tensile properties due to the sensitivity of the ceramic particle cracks to tensile stress.

INTERMETALLICS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Significantly improved particle strengthening of Al-Sc alloy by high Sc composition design and rapid solidification

Shuiqing Liu et al.

Summary: The mechanical properties of Al-Sc binary alloys are influenced by both the Sc content and cooling rate. Higher Sc content at high cooling rate can significantly enhance the strength of the alloy.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Chemistry, Physical

Preparation of in-situ AlN-TiC nanoparticles and their refinement and reinforcement effects on Al-Zn-Mn-Cu alloy

Yuhang Xia et al.

Summary: This study improved the distribution of AlN and TiC nanoparticles in the matrix by preparing AlN-TiC/Al composite ribbons and adding them to an Al-Zn-Mn-Cu alloy, leading to a significant enhancement in the mechanical properties of the composite.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Simultaneously improving strength and ductility of hybrid Al-Si matrix composite with polyphasic and multi-scale ceramic particles

Binghao Han et al.

Summary: Hybrid aluminum matrix composites containing polyphasic and multi-scale reinforcement particles were prepared by powder metallurgy and meltspinning method, which significantly improved the mechanical properties of Al-12Si alloy, including tensile strength, ductility, and hardness. The excellent mechanical properties were attributed to micron-sized VSi2 particles, nano-sized AlN, VB2, Al4C3, as well as well-bonded particle/matrix interface. Multiple strengthening mechanisms, such as Orowan strengthening, CTE mismatch strengthening, and Hall-Petch effect, contributed to the enhancement of mechanical properties.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

The microstructures and mechanical properties of a 5vol%SiC/AA2024 nanocomposite fabricated by powder metallurgy

D. K. Q. Mu et al.

Summary: By optimizing the high energy ball milling and spark plasma sintering time, the hardness and strength of the 5vol%SiC/AA2024 nanocomposite can be significantly enhanced, while improving its ductility. The strengthening mechanisms of the 5vol%SiC/AA2024 nanocomposite mainly come from nanoparticle strengthening and grain boundary strengthening.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Review: Synthesis and characterization of silicon nitride and graphite reinforced aluminium hybrid metal matrix composites

K. Sharan Teja Reddy et al.

Summary: This research paper investigates the impact of Silicon Nitride (Si3N4) and Graphene as reinforcements for aluminum (Al7475) on the Physical properties of the composites, focusing on their contribution to enhancing the mechanical performance of the composites.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Impact of addition of manganese and boron carbide on aluminium metal matrix composites using powder metallurgy process

Mohammad Umair Zaki et al.

Summary: Aluminium boron carbide composite is a low weight high strength material used in aerospace and defense industry. By adding boron carbide and manganese to aluminium through powder metallurgy process, the mechanical properties can be improved to replace aluminium in various practical applications such as automobile, aerospace, and military industries.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Dry sliding wear behaviour of Al?5Si-3Cu-0.5Mn alloy and its WC reinforced composites at elevated temperatures

P. N. Sharath Kumar et al.

Summary: The sliding wear behavior of Al-5Si-3Cu-0.5Mn (LM4) alloy and its composites reinforced with WC particles was studied at both room and elevated temperatures. The results showed that wear resistance varied at different temperatures, with the composites exhibiting different friction coefficients. Wear analysis indicated the possibility of various wear mechanisms on the worn surface.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

A re-investigation: Effect of powder metallurgy parameters on the physical and mechanical properties of aluminium matrix composites

Naveen Kumar et al.

Summary: Aluminium matrix composites with high electrical and thermal conductivity, strength, and other properties can be fabricated using techniques like powder metallurgy. The compaction pressure has a significant impact on controlling density and porosity. The optimal parameters for Aluminium-based materials fabricated by powder metallurgy are 600-700 MPa compaction pressure, 520-600 °C sintering temperature, and 3-4 hours sintering time.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Synergistic strengthening of aluminum matrix composites reinforced by SiC nanoparticles and carbon fibers

J. J. Sha et al.

MATERIALS LETTERS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Design of an in-situ multi-scale particles reinforced (Al2O3+ZrB2+AlN)/Al composite with high strength, elasticity modulus and thermal stability

Yihan Bian et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Cooperative enhancements in ductility and strain hardening of a solution-treated Al-Cu-Mn alloy at cryogenic temperatures

Wangjun Cheng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Chemistry, Physical

Influence of laser shock peening on the coefficient of thermal expansion of Al (7075)-based hybrid composites

J. T. Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Chemistry, Physical

Serrated flow and ZrB2 nanoparticle agglomerations of in-situ AA6061 alloy matrix composites

Jili Wu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

High-entropy alloys by mechanical alloying: A review

Mayur Vaidya et al.

JOURNAL OF MATERIALS RESEARCH (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Powder metallurgical processing of a 2xxx series aluminum powder metallurgy metal alloy reinforced with AlN particulate additions

G. A. Sweet et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

In situ synthesis of copper-modified graphene-reinforced aluminum nanocomposites with balanced strength and ductility

Jie Wang et al.

JOURNAL OF MATERIALS SCIENCE (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Simultaneously increasing the high-temperature tensile strength and ductility of nano-sized TiCp reinforced Al-Cu matrix composites

Wei-Si Tian et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Processing and tensile properties of A356 composites containing in situ small-sized Al3Ti particulates

Zhiwei Liu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Acoustics

Effects of ultrasonic vibration on microstructure and mechanical properties of nano-sized SiC particles reinforced Al-5Cu composites

Jianyu Li et al.

ULTRASONICS SONOCHEMISTRY (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Preparation of in situ Al3Nb-NbB2-NbC/Al inoculant and its effect on microstructures and properties of weldable Al-Cu-Mn alloy

Jinhua Ding et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Refining and Reinforcing Effects of In Situ AlN-TiN-iB(2)/Al Composite Refiner on Aluminum

Qian Wang et al.

ADVANCED ENGINEERING MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Effect of TiN nanoparticles on microstructure and properties of Al2024-TiN nanocomposite by high energy milling and spark plasma sintering

Bing Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Chemistry, Physical

Improvement of particles distribution of in-situ 5 vol% TiB2 particulates reinforced Al-4.5Cu alloy matrix composites with ultrasonic vibration treatment

Qi Gao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Superior creep resistance of 0.3 wt% nano-sized TiCp/Al-Cu composite

Wei-Si Tian et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Nanoscience & Nanotechnology

TiB2 reinforced aluminum based in situ composites fabricated by stir casting

Fei Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy

Kaka Ma et al.

ACTA MATERIALIA (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Controlled synthesis of different morphologies of TiB2 microcrystals by aluminum melt reaction method

Pengting Li et al.

MATERIALS RESEARCH BULLETIN (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Reactive mechanism and mechanical properties of in situ composites fabricated from an Al-TiO2 system by friction stir processing

Q. Zhang et al.

ACTA MATERIALIA (2012)

Add to Collection

Article Materials Science, Composites

Particle-matrix interface microstructure of in situ TiCp-AlNp/Al composite

Chunxiang Cui et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis and characterization of Mg-AZ91/AlN composites

E. Bedolla et al.

MATERIALS & DESIGN (2012)

Add to Collection

Article Engineering, Multidisciplinary

Ultrasound assisted in situ technique for the synthesis of particulate reinforced aluminum matrix composites

Zhiwei Liu et al.

COMPOSITES PART B-ENGINEERING (2011)

Add to Collection

Article Materials Science, Composites

Particle-reinforced aluminum matrix composites produced from powder mixtures via friction stir processing

I. S. Lee et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2011)

Add to Collection

Article Nanoscience & Nanotechnology

Preparation and rheocasting of semisolid slurry of 5083 Al alloy with indirect ultrasonic vibration process

Shulin Lu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

Add to Collection

Article Nanoscience & Nanotechnology

Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength

Z Zhang et al.

SCRIPTA MATERIALIA (2006)

Add to Collection

Article Nanoscience & Nanotechnology

Hall-Petch relation and boundary strengthening

N Hansen

SCRIPTA MATERIALIA (2004)

Add to Collection

Review Materials Science, Multidisciplinary

Microstructural and mechanical characteristics of in situ metal matrix composites

SC Tjong et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.