Related references
Note: Only part of the references are listed.Morphology characteristics of α precipitates related to the crystal defects and the strain accommodation of variant selection in a metastable α titanium alloy
Ruifeng Dong et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Flow characterization of magnesium alloy ZK61 during hot deformation with improved constitutive equations and using activation energy maps
Jinchuan Long et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Plastic instability in Ti?6Cr?5Mo?5V?4Al metastable ?-Ti alloy containing the ?-spinodal decomposition structures
Wei Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Hot deformation behavior and microstructural evolution of supersaturated Inconel 783 superalloy
Ke Tang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Hot deformation behavior and processing map of a new type Mg-6Zn-1 Gd-1Er alloy
Bo Che et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Microstructure evolution and hot deformation behavior of carbon nanotube reinforced 2009Al composite with bimodal grain structure
K. Ma et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Evaluation of the deformation behaviors and hot workability of a high-strength low-alloy steel
Mingjie Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Hot deformation behavior and mechanism of a new metastable ? titanium alloy Ti?6Cr?5Mo?5V?4Al in single phase region
Changmin Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Investigation on Hot Workability of Ti-37 At Pct Nb Alloy Based on Processing Map and Microstructural Evolution
Dong Sun et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2021)
Calculation and construction of deformation mechanism maps and processing maps for CoCrFeMnNi and Al0.5CoCrFeMnNi high-entropy alloys
H. T. Jeong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Dynamic recrystallization and hot deformation mechanisms of a eutectic Al0.7CoCrFeMnNi high-entropy alloy
H. T. Jeong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Experimental investigation on dynamic phase transformation and texture evolution of Ti55531 high strength titanium alloy during hot compression in the α plus β region
Chuan Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
High strength and ductility Mg-8Gd-3Y-0.5Zr alloy with bimodal structure and nano-precipitates
Xiaoxiao Wei et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Spheroidization and dynamic recrystallization mechanisms of Ti-55511 alloy with bimodal microstructures during hot compression in α plus β region
Y. C. Lin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
A dislocation density-based model and processing maps of Ti-55511 alloy with bimodal microstructures during hot compression in α plus β region
Yi-Wei Xiao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Hot compression deformation behavior and processing maps of ATI 718Plus superalloy
Jianbo Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Formation and evolution of new α grain boundary and its influence on globularization of α lamellae in TC17 alloy
Ke Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Hot deformation behavior and 3D processing maps of AA7020 aluminum alloy
Bin Ke et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
The effects of grain morphology and crystallographic orientation on fatigue crack initiation in a metastable β titanium alloy Ti-7333
Zhihong Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Evaluation of the hot workability and deformation mechanisms for a metastable beta titanium alloy prepared from powder
Q. Y. Zhao et al.
MATERIALS CHARACTERIZATION (2019)
Hot deformation behavior and microstructure evolution of Ti-6Cr-5Mo-5V-4Al alloy during hot compression
Shuai Long et al.
VACUUM (2019)
Quantification of multiple softening processes occurring during multi-stage thermoforming of high-strength steel
Rong Zeng et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Effects of initial microstructure on hot deformation behavior of Al-7.9Zn-2.7Mg-2.0Cu (wt%) alloy
Qianhao Zang et al.
MATERIALS CHARACTERIZATION (2019)
Comparison of hot deformation behaviour and microstructural evolution for Ti-5Al-5V-5Mo-3Cr alloys prepared by powder metallurgy and ingot metallurgy approaches
Qinyang Zhao et al.
MATERIALS & DESIGN (2019)
Phase transformation and dynamic recrystallization behaviors in a Ti55511 titanium alloy during hot compression
Y. C. Lin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Constitutive modelling, dynamic globularization behavior and processing map for Ti-6Cr-5Mo-5V-4Al alloy during hot deformation
Shuai Long et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
High-temperature deformation behavior of TiNi-Nb hypoeutectic alloy
Entao Dong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Constitutive behavior and microstructural evolution of FeMnSiCrNi shape memory alloy subjected to compressive deformation at high temperatures
Shuyong Jiang et al.
MATERIALS & DESIGN (2019)
Hot deformation behavior and constitutive modeling of fine grained Inconel 718 superalloy
Y. B. Tan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Hot deformation behavior and microstructure evolution of annealed Al-7.9Zn-2.7Mg-2.0Cu (wt%) alloy
Qianhao Zang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Deformation behavior of TC17 titanium alloy with basketweave microstructure during isothermal compression
J. Z. Sun et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
An Analysis on the Constitutive Models for Forging of Ti6Al4V Alloy Considering the Softening Behavior
Paul M. Souza et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Hot deformation and dynamic recrystallization of a near-beta titanium alloy in the beta single phase region
Wu Chuan et al.
VACUUM (2018)
Characterization of high-temperature deformation behavior and processing map of TB17 titanium alloy
Zhe Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Constitutive model and optimal processing parameters of TC17 alloy with a transformed microstructure via kinetic analysis and processing maps
Lian Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Deformation behavior and microstructure evolution during hot working of a coarse-grained Ti-5Al-5Mo-5V-3Cr-1Zr titanium alloy in beta phase field
X. G. Fan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Hot deformation and activation energy of a CNT-reinforced aluminum matrix nanocomposite
F. Mokdad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Experimental study and numerical simulation of dynamic recrystallization behavior of TiAl-based alloy
Zhipeng Wan et al.
MATERIALS & DESIGN (2017)
Flow softening behavior of Ti-13V-11Cr-3Al beta Ti alloy in double-hit hot compression tests
A. Momeni et al.
JOURNAL OF MATERIALS RESEARCH (2016)
Deformation heating and flow localization in Ti-15-3 metastable β titanium alloy subjected to high Z deformation
Jingqi Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
EBSD analysis of evolution of dynamic recrystallization grains and δ phase in a nickel-based superalloy during hot compressive deformation
Y. C. Lin et al.
MATERIALS & DESIGN (2016)
EBSD study of a hot deformed nickel-based superalloy
Y. C. Lin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Evaluation of the hot workability corresponding to complex deformation mechanism evolution for Ti-10V-2Fe-3Al alloy in a wide condition range
Guo-Zheng Quan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Competition between dynamic recovery and recrystallization during hot deformation for TC18 titanium alloy
Y. Q. Ning et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Hot Deformation Behavior of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe Alloy in α + β Field
Zhaoxin Du et al.
METALS (2015)
Microstructure study and constitutive modeling of Ti-6Al-4V alloy at elevated temperatures
Nitin Kotkunde et al.
MATERIALS & DESIGN (2014)
Deformation behavior in the isothermal compression of Ti-5Al-5Mo-5V-1Cr-1Fe alloy
S. F. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
The construction of constitutive model and identification of dynamic softening mechanism of high-temperature deformation of Ti-5Al-5Mo-5V-1Cr-1Fe alloy
Houquan Liang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Hot deformation behavior and processing map of coarse-grained Mg-Gd-Y-Nd-Zr alloy
Xiangsheng Xia et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Study of the hot deformation behaviour in Ti-5Al-5Mo-5V-3Cr-1Zr
F. Warchomicka et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Microstructural development during hot working of Mg-3Al-1Zn
A. G. Beer et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)
Share Paper
