Related references
Note: Only part of the references are listed.Effects of grain size on body-centered-cubic martensitic transformation in metastable Fe46Co30Cr10Mn5Si7V2 high-entropy alloy
Yong Hee Jo et al.
SCRIPTA MATERIALIA (2021)
Superior low-cycle fatigue properties of CoCrNi compared to CoCrFeMnNi
Kaiju Lu et al.
SCRIPTA MATERIALIA (2021)
Mechanism of twinning induced plasticity in austenitic lightweight steel driven by compositional complexity
Zen-Hao Lai et al.
ACTA MATERIALIA (2021)
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
E. P. George et al.
ACTA MATERIALIA (2020)
The role of irradiation on deformation-induced martensitic phase transformations in face-centered cubic alloys
Janelle P. Wharry et al.
JOURNAL OF MATERIALS RESEARCH (2020)
Comparison of cryogenic deformation of the concentrated solid solutions CoCrFeMnNi, CoCrNi and CoNi
A. S. Tirunilai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Two-stage Hall-Petch relationship in Cu with recrystallized structure
Y. Z. Tian et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Design of high-ductile medium entropy alloys for dental implants
Shubin Wang et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Martensitic transformation and mechanical behavior of a medium-entropy alloy
C. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Hot deformation behavior of the high-entropy alloy CoCuFeMnNi
Natasha Prasad et al.
JOURNAL OF MATERIALS RESEARCH (2019)
Screw dislocation driven martensitic nucleation: A step toward consilience of deformation scenario in fcc materials
Tae-Ho Lee et al.
ACTA MATERIALIA (2019)
Superior cryogenic tensile properties of ultrafine-grained CoCrNi medium-entropy alloy produced by high-pressure torsion and annealing
Praveen Sathiyamoorthi et al.
SCRIPTA MATERIALIA (2019)
Effect of elemental combination on friction stress and Hall-Petch relationship in face-centered cubic high / medium entropy alloys
Shuhei Yoshida et al.
ACTA MATERIALIA (2019)
Temperature and load-ratio dependent fatigue-crack growth in the CrMnFeCoNi high-entropy alloy
Keli V. S. Thurston et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Influence of deformation induced nanoscale twinning and FCC-HCP transformation on hardening and texture development in medium-entropy CrCoNi alloy
C. E. Slone et al.
ACTA MATERIALIA (2018)
Stacking fault energy of face-centered-cubic high entropy alloys
S. F. Liu et al.
INTERMETALLICS (2018)
Cryogenic-deformation-induced phase transformation in an FeCoCrNi high-entropy alloy
Qingyun Lin et al.
MATERIALS RESEARCH LETTERS (2018)
A novel ultrafine-grained Fe-22Mn-0.6C TWIP steel with superior strength and ductility
Y. Z. Tian et al.
MATERIALS CHARACTERIZATION (2017)
Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloy
S. -H. Joo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing
Shuhei Yoshida et al.
SCRIPTA MATERIALIA (2017)
Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy
Y. H. Jo et al.
NATURE COMMUNICATIONS (2017)
Enhanced strength and ductility of bulk CoCrFeMnNi high entropy alloy having fully recrystallized ultrafine-grained structure
S. J. Sun et al.
MATERIALS & DESIGN (2017)
Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0.3CoCrFeNi high entropy alloy
B. Gwalani et al.
MATERIALS & DESIGN (2017)
A critical review of high entropy alloys and related concepts
D. B. Miracle et al.
ACTA MATERIALIA (2017)
Shear and shuffling accomplishing polymorphic fcc γ → hcp ε → bct α martensitic phase transformation
Xu-Sheng Yang et al.
ACTA MATERIALIA (2017)
The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy
J. Miao et al.
ACTA MATERIALIA (2017)
Revealing the deformation mechanisms of Cu-Al alloys with high strength and good ductility
Y. Z. Tian et al.
ACTA MATERIALIA (2016)
Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off
Zhiming Li et al.
NATURE (2016)
Deformation Mechanisms in Austenitic TRIP/TWIP Steel as a Function of Temperature
Stefan Martin et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Size effect, critical resolved shear stress, stacking fault energy, and solid solution strengthening in the CrMnFeCoNi high-entropy alloy
Norihiko L. Okamoto et al.
SCIENTIFIC REPORTS (2016)
The influence of stacking fault energy on the microstructural and strainhardening evolution of Fe-Mn-Al-Si steels during tensile deformation
D. T. Pierce et al.
ACTA MATERIALIA (2015)
Processing, Microstructure and Mechanical Properties of the CrMnFeCoNi High-Entropy Alloy
Bernd Gludovatz et al.
JOM (2015)
Temperature dependencies of the elastic moduli and thermal expansion coefficient of an equiatomic, single-phase CoCrFeMnNi high-entropy alloy
G. Laplanche et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Microstructural evolution of a CoCrFeMnNi high-entropy alloy after swaging and annealing
G. Laplanche et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Significant contribution of stacking faults to the strain hardening behavior of Cu-15%Al alloy with different grain sizes
Y. Z. Tian et al.
SCIENTIFIC REPORTS (2015)
The influence of manganese content on the stacking fault and austenite/ε-martensite interfacial energies in Fe-Mn-(Al-Si) steels investigated by experiment and theory
D. T. Pierce et al.
ACTA MATERIALIA (2014)
Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys
Z. Wu et al.
INTERMETALLICS (2014)
Ferrite Effects in Fe-Mn-Al-C Triplex Steels
Auriane Etienne et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
F. Otto et al.
ACTA MATERIALIA (2013)
Structural morphology and characterization of (AlCrMoTaTi)N coating deposited via magnetron sputtering
Du-Cheng Tsai et al.
APPLIED SURFACE SCIENCE (2013)
The effect of molybdenum on the corrosion behaviour of the high-entropy alloys Co1.5CrFeNi1.5Ti0.5Mox in aqueous environments
Y. L. Chou et al.
CORROSION SCIENCE (2010)
Anomalous decrease in X-ray diffraction intensities of Cu-Ni-Al-Co-Cr-Fe-Si alloy systems with multi-principal elements
Jien-Wei Yeh et al.
MATERIALS CHEMISTRY AND PHYSICS (2007)
Tensile properties of a nanocrystalline 316L austenitic stainless steel
XH Chen et al.
SCRIPTA MATERIALIA (2005)
Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe-Mn-C alloys
S Allain et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes
JW Yeh et al.
ADVANCED ENGINEERING MATERIALS (2004)
Grain size dependence of mechanical, corrosion and tribological properties of high nitrogen stainless steels
A Di Schino et al.
JOURNAL OF MATERIALS SCIENCE (2003)
Deformation behavior of HCP Ti-Al alloy single crystals
JC Williams et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)
Share Paper
