☆ 4.7 Article

Na0.44MnO2 coated with In2O3 as a high-voltage cathode for sodium-ion batteries

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Flexible SnTe/carbon nanofiber membrane as a free-standing anode for high-performance lithium-ion and sodium-ion batteries

Min Yang et al.

Summary: The SnTe/C nanofibers membrane (SnTe/CNFM) demonstrates outstanding electrochemical performance and mechanical flexibility as a free-standing anode in lithium/sodium-ion batteries, showing high discharge capacities in various cycling conditions.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

A novel Fe-defect induced pure-phase Na4Fe2.91(PO4)2P2O7 cathode material with high capacity and ultra-long lifetime for low-cost sodium-ion batteries

Along Zhao et al.

Summary: In this study, a novel pure-phase Na4Fe2.91(PO4)(2)(P2O7) cathode material was prepared by introducing a small amount of Fe defects in the lattice of NFPP. First-principles calculations revealed that the Fe defects result in lower band gap and migration energy barriers, leading to higher electron and Na+ ion conductivity. The material exhibited high discharge capacity, excellent rate performance, and outstanding long cycle stability, showcasing the feasibility of the defect regulation strategy for high-quality, low-cost sodium-ion batteries.

NANO ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Multiple effects of Mg1-xNixO coating on P2-type Na0.67Ni0.33Mn0.67O2 to generate highly stable cathodes for sodium-ion batteries

Hyeongwoo Kim et al.

Summary: P2-type NaNiMnO2 (NNMO) is a high-energy and high-voltage cathode material in sodium-ion batteries, but surface degradation effects limit its electrochemical stability. By applying Mg1-xNixO (MgNiO) as a coating, cycling stability and rate capability of NNMO can be significantly improved.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

O3-NaNi0.47Zn0.03Mn0.5O2 cathode material for durable Na-ion batteries

Xiaomeng Meng et al.

Summary: This study enhanced the electrochemical reversibility and air stability of O3-NaNi0.5Mn0.5O2 cathode through rational Zn2+ doping, leading to high discharge capacity, excellent cycling stability, and high-rate performance. The doped cathode underwent phase transitions with minimal volume changes, demonstrating enhanced cyclic stability and confirming the feasibility of using O3-type NaNi0.47Zn0.03Mn0.5O2 cathode for Na-ion batteries.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

The structural origin of enhanced stability of Na3.32Fe2.11Ca0.23(P2O7)2 cathode for Na-ion batteries

Yumei Liu et al.

Summary: By selectively doping calcium, a sodium-deficient Na3.32Fe2.11Ca0.23(P2O7) (2) cathode with exceptional stability has been prepared. This engineered electrode material shows high reversibility and good structural reversibility, achieving a capacity retention of 81.7% after 1000 cycles at 1 C, which is significantly better than that of the undoped electrode.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Structural and electrochemical trends in mixed manganese oxides Nax(M0.44Mn0.56)O2 (M = Mn, Fe, Co, Ni) for sodium-ion battery cathode

Chol-Jun Yu et al.

Summary: The study proposes mixed sodium manganese oxides as potential cathode materials for sodium-ion batteries with advantages in electrode voltage, capacity, and sodium-ion diffusion rate, based on first-principles calculations. Through identifying intermediate phases during Na insertion/extraction, the study shows an increase in electrode voltage and specific capacities by mixing due to extending the lower limit of Na content. Furthermore, investigation of sodium-ion diffusion reveals fast migration within the S-shaped tunnel and moderate migration within the small-sized tunnel in these compounds.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Rational design of Co-free layered cathode material for sodium-ion batteries

Natalia Voronina et al.

Summary: The study found that Ti substitution can improve the performance of sodium-ion battery cathode materials, including increasing initial capacity and capacity retention, as well as reducing volume changes. By pairing with a hard-carbon anode, Na[(Mn0.4Fe0.3Ni0.3)(0.9)Ti-0.1]O-2 achieved excellent cyclability and capacity retention for 300 cycles.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Ultrathin MgO coating on fabricated O3-NaNi0.45Mn0.3Ti0.2Zr0.05O2 composite cathode via magnetron sputtering for enhanced kinetic and durable sodium-ion batteries

Mingzhe Leng et al.

Summary: An innovative and convenient method has been developed to stabilize the surface of O3-type NaNi0.45Mn0.3Ti0.2Zr0.05O2 composite electrode using an ultrathin MgO film. The MgO-coated cathode shows superior surface stability and capacity retention under high rate conditions, with three main mechanisms discovered to enhance electrochemical performance.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Ca-substituted P3-type NaxNi1/3Mn1/3Co1/3O2 as a potential high voltage cathode active material for sodium-ion batteries

Masaki Matsui et al.

Summary: The study found that Ca doping can improve the electrochemical performance of layered sodium transition metal oxide, reduce the overpotential during charge and discharge processes, and promote the migration of Na+ ions. Doping also suppresses the irreversible phase transition of sodium ions from the layered structure, significantly improving battery cycling stability and capacity retention.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Tailoring P2/P3 Biphases of Layered NaxMnO2 by Co Substitution for High-Performance Sodium-Ion Battery

Na Jiang et al.

Summary: The P2/P3-Na0.67Mn0.64Co0.30Al0.06O2 cathode with tunable biphase structures shows excellent rate capability and cycling stability for sodium-ion batteries, attributed to stable crystal structures and fast Na+ diffusion. The study highlights the importance of precisely tailoring phase composition in designing advanced cathode materials.

SMALL (2021)

Add to Collection

Article Chemistry, Physical

A general strategy for batch development of high-performance and cost-effective sodium layered cathodes

Biwei Xiao et al.

Summary: High-performance and low-cost transition metal layered oxides using earth abundant elements are promising cathodes for Na-ion batteries. The challenge lies in determining the structure due to the complexities introduced by Na size, different Na occupations, and various layer stacking sequences. This work showcases a general roadmap for batch development of sodium layered cathodes, providing critical guidance to the rational design of future cathode materials.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

P2/O3 biphasic Fe/Mn-based layered oxide cathode with ultrahigh capacity and great cyclability for sodium ion batteries

Cong Chen et al.

Summary: By introducing high-proportion Li/Ti co-substitution, a unique Fe/Mn-based layered oxide with a P2/O3 biphasic architecture was successfully designed, offering high capacity and long cycling stability compared to other Fe- and Mn-based cathodes.

NANO ENERGY (2021)

Add to Collection

Review Chemistry, Physical

Strategies to improve the performance of phosphide anodes in sodium-ion batteries

Wu Zhang et al.

Summary: Sodium (Na)-ion batteries have attracted attention for large-scale energy storage due to their high compatibility and low cost requirements. Recent research on phosphides as anode materials has focused on morphological designs and interfacial modifications, leading to improvements in capacity, rate capability, and cycle life. The correlation between nanostructure and performance, as well as intensive interfacial analysis of phosphide anodes, have been key focus areas for research in this field.

NANO ENERGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Wire-in-Wire TiO2/C Nanofibers Free-Standing Anodes for Li-Ion and K-Ion Batteries with Long Cycling Stability and High Capacity

Die Su et al.

Summary: The study successfully synthesized a flexible electrode TiO2 ww/CN film with outstanding performance, which can serve as a standalone electrode in Li/K ion batteries, exhibiting excellent electrochemical performance and stability.

NANO-MICRO LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Role of Lithium Doping in P2-Na0.67Ni0.33Mn0.67O2 for Sodium-Ion Batteries

Yingying Xie et al.

Summary: The crystallographic role and electrochemical impact of lithium at different sites in PNNMO were investigated. Lithium occupancy on prismatic Na sites is promoted in Na-deficient PNNMO, leading to enhanced stability and slightly increased specific capacity with partial substitution of Na. However, when lithium is primarily located on octahedral TM sites, capacity is increased at the expense of stability.

CHEMISTRY OF MATERIALS (2021)

Add to Collection

Article Electrochemistry

A collaborative strategy with ionic conductive Na2SiO3 coating and Si doping of P2-Na0.67Fe0.5Mn0.5O2 cathode: An effective solution to capacity attenuation

Jianyue Jiao et al.

Summary: This study focuses on a strategy of modifying layered oxide P2-Na0.67Fe0.5Mn0.5O2 with conducting ionic Na2SiO3 nanolayers and Si doping, resulting in excellent electrochemical performance including reduced polarization, improved cycling stability, and enhanced thermal stability.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Chemistry, Physical

Y-doped P2-type Na0.67Ni0.33Mn0.67O2: A sodium-ion battery cathode with fast charging and enhanced cyclic performance

Sunwook Kim et al.

Summary: Y-doping improved the rate capability and cycle retention of P2-type Na0.67Ni0.33Mn0.67O2 cathode material, resulting in a more stable structure.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

One-dimensional channel to trigger high-performance sodium-ion battery via doping engineering

Yanchun Sun et al.

Summary: Doping is proposed as a promising strategy to optimize electrode materials by investigating the correlation between doping chemistry and crystal morphologies. The impact of different ions doping on the structure of CuS model was demonstrated using electron microscopy and synchrotron X-ray tomography, suggesting a potential design pathway for high-performance sodium-ion batteries.

NANO ENERGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Interfacial adsorption-insertion mechanism induced by phase boundary toward better aqueous Zn-ion battery

Lutong Shan et al.

Summary: In this study, a biphasic vanadate material was reported, and a novel interfacial adsorption-insertion mechanism induced by phase boundaries was detected. First-principles calculations showed that this mechanism can enhance specific capacity, reduce diffusion energy barrier, and promote faster reaction kinetics.

INFOMAT (2021)

Add to Collection

Review Materials Science, Multidisciplinary

A review of charge storage in porous carbon-based supercapacitors

Xian-you Luo et al.

Summary: Porous carbon-based electrode materials are widely used in supercapacitors due to their stability, high surface area, and adjustable pore structure. Factors such as specific surface area, pore structure, surface heteroatoms, and electrode design all play significant roles in determining the performance of superca

NEW CARBON MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

P2-type Na0.8(Li0.33Mn0.67-xTix)O2 doped by Ti as cathode materials for high performance sodium-ion batteries

Xiao-Hang Ma et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Coatings & Films

Deposition of hollow sphere In2O3 coatings by liquid flame spray

Chao Zhang et al.

SURFACE ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

The effect of Sn substitution on the structure and oxygen activity of Na0.67Ni0.33Mn0.67O2 cathode materials for sodium ion batteries

Jinke Li et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

Electrospun SnSe/C nanofibers as binder-free anode for lithium-ion and sodium-ion batteries

Jing Xia et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

A surface chemistry assistant strategy to high power/energy density and cost-effective cathode for sodium ion battery

Jie Hou et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

Self-standing P2/P3 heterostructured Na0.7CoO2 nanosheet arrays as 3D cathodes for flexible sodium-ion batteries

Liang Xue et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

The Sodium Storage Mechanism in Tunnel-Type Na0.44MnO2 Cathodes and the Way to Ensure Their Durable Operation

Munseok S. Chae et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Controlling Surface Phase Transition and Chemical Reactivity of O3-Layered Metal Oxide Cathodes for High-Performance Na-Ion Batteries

Junhua Song et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Co3O4-modified P2-Na2/3Mn0.75Co0.25O2 cathode for Na-ion batteries with high capacity and excellent cyclability

Lijun Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Chemistry, Physical

Structures and Electrochemistry of γ-Butyrolactone Solvates of Na Salts

Ryoichi Tatara et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Rational Route for Increasing Intercalation Capacity of Hard Carbons as Sodium-Ion Battery Anodes

Yuto Katsuyama et al.

CHEMSUSCHEM (2020)

Add to Collection

Article Chemistry, Physical

Al and Fe-containing Mn-based layered cathode with controlled vacancies for high-rate sodium ion batteries

Xiangsi Liu et al.

NANO ENERGY (2020)

Add to Collection

Review Chemistry, Physical

Review on comprehending and enhancing the initial Coulombic efficiency of anode materials in lithium-ion/sodium-ion batteries

Xin Li et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Buffer effect of In2O3 interlayer on band offset at CuO/ZnO interface for enhanced photoelectrocatalytic water splitting

Ying-Chu Chen et al.

JOURNAL OF CATALYSIS (2019)

Add to Collection

Article Chemistry, Physical

Al2O3 coated Na0.44MnO2 as high-voltage cathode for sodium ion batteries

Yue Zhang et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Mitigating the voltage fading and lattice cell variations of O3-NaNi0.2Fe0.35Mn0.45O2 for high performance Na-ion battery cathode by Zn doping

Qianjiang Mao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

Suppressing phase transition and improving electrochemical performances of O3-NaNi1/3Mn1/3Fe1/3O2 through ionic conductive Na2SiO3 coating

Na Li et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Synthesis and characterization of Na0.44MnO2 nanorods/graphene composite as cathode materials for sodium-ion batteries

Zhang Yue et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2019)

Add to Collection

Article Chemistry, Physical

Engineering Al2O3 atomic layer deposition: Enhanced hard carbon-electrolyte interface towards practical sodium ion batteries

Haiyan Lu et al.

NANO ENERGY (2019)

Add to Collection

Article Electrochemistry

Half-cell and full-cell applications of sodium ion batteries based on carbon-coated Na3Fe0.5V1.5(PO4)(3) nanoparticles cathode

Renming Zhan et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Metallurgy Inspired Formation of Homogeneous Al2O3 Coating Layer To Improve the Electrochemical Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material

Mingxia Dong et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Utilizing Co2+/Co3+ Redox Couple in P2-Layered Na0.66Co0.22Mn0.44Ti0.34O2 Cathode for Sodium-Ion Batteries

Qin-Chao Wang et al.

ADVANCED SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

The effect of manganese vacancy in birnessite-type MnO2 on room-temperature oxidation of formaldehyde in air

Jinlong Wang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Multiangular Rod-Shaped Na0.44MnO2 as Cathode Materials with High Rate and Long Life for Sodium-Ion Batteries

Qiannan Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Physical

Layered P2-Na2/3[Ni1/3Mn2/3]O2 as high-voltage cathode for sodium-ion batteries: The capacity decay mechanism and Al2O3 surface modification

Yihang Liu et al.

NANO ENERGY (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Tunable and Robust Phosphite-Derived Surface Film to Protect Lithium-Rich Cathodes in Lithium-Ion Batteries

Jung-Gu Han et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Article Chemistry, Physical

Improved electrochemical and thermal properties of nickel rich LiNi0.6Co0.2Mn0.2O2 cathode materials by SiO2 coating

Woosuk Cho et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Evolution of Lattice Structure and Chemical Composition of the Surface Reconstruction Layer in Li1.2Ni0.2Mn0.6O2 Cathode Material for Lithium Ion Batteries

Pengfei Yan et al.

NANO LETTERS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

A Sodium Manganese Oxide Cathode by Facile Reduction for Sodium Batteries

Jinju Song et al.

CHEMISTRY-AN ASIAN JOURNAL (2014)

Add to Collection

Article Physics, Multidisciplinary

Novel copper redox-based cathode materials for room-temperature sodium-ion batteries

Xu Shu-Yin et al.

CHINESE PHYSICS B (2014)

Add to Collection

Article Chemistry, Physical

Ab Initio Study of the Sodium Intercalation and Intermediate Phases in Na0.44MnO2 for Sodium-Ion Battery

Heejin Kim et al.

CHEMISTRY OF MATERIALS (2012)

Add to Collection

Article Chemistry, Physical

Synthesis and Properties of Layered-Structured Mn5O8 Nanorods

Tao Gao et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.