4.7 Article

Amorphous carbon nanofibers incorporated with ultrafine GeO2 nanoparticles for enhanced lithium storage performance

Related references

Note: Only part of the references are listed.
Article Nanoscience & Nanotechnology

Employing Ni-Embedded Porous Graphitic Carbon Fibers for High-Efficiency Lithium-Sulfur Batteries

Changhao Wang et al.

Summary: In this study, a novel cathode and anode for lithium-sulfur batteries (LSBs) were constructed using Ni-embedded porous graphitic carbon fiber (PGCF@Ni) as the scaffold. Elaborate surface engineering effectively restrains the growth of lithium dendrites in the anode, while the cathode exhibits superior rate performance and stability. The assembled full battery shows promising electrochemical properties.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Multidisciplinary

Achieving Uniform Li Plating/Stripping at Ultrahigh Currents and Capacities by Optimizing 3D Nucleation Sites and Li2Se-Enriched SEI

Jiaqi Cao et al.

Summary: This article introduces a hierarchical three-dimensional structure developed on a carbon fiber cloth that regulates the formation and deposition of lithium metal anodes and stabilizes the electrolyte-anode interface, resulting in excellent performance and cycling stability.

ADVANCED SCIENCE (2022)

Article Chemistry, Physical

Synthesis of three-dimensional honeycomb-like Fe3N@NC composites with enhanced lithium storage properties

Shenghong Liu et al.

Summary: Iron nitrides are considered attractive anode materials for lithium ion batteries due to their high theoretical capacities, high tap densities, cost-effectiveness, etc. This study successfully synthesized iron nitride@carbon composites with excellent storage performance using pore structure engineering and carbon coating strategies, providing new insights for the development of lithium ion batteries.

CARBON (2022)

Article Engineering, Environmental

Lowering the voltage-hysteresis of CuS anode for Li-ion batteries via constructing heterostructure

Huiqiao Liu et al.

Summary: This study proposes and successfully verifies the hypothesis of lowering voltage-hysteresis by constructing heterostructures. The CuS/MnS-C HNFs electrode exhibits lower voltage-hysteresis values and the best rate performance among their counterpart electrodes.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

MOF-Derived Bifunctional Co0.85Se Nanoparticles Embedded in N-Doped Carbon Nanosheet Arrays as Efficient Sulfur Hosts for Lithium-Sulfur Batteries

Yonghui Xie et al.

Summary: A novel design strategy utilizing Co0.85Se nanoparticles embedded in nitrogen-doped carbon nanosheet arrays on carbon cloth as a self-supported host for a sulfur cathode is introduced in the article. This design can effectively improve the cycle performance and discharge specific capacity of lithium-sulfur batteries.

NANO LETTERS (2021)

Article Multidisciplinary Sciences

Nitrogen and boron doped carbon layer coated multiwall carbon nanotubes as high performance anode materials for lithium ion batteries

Bo Liu et al.

Summary: The nitrogen and boron doped carbon layer coated multiwall carbon nanotubes can be used as anodes for lithium ion batteries, showing high stable capacity and superior rate capability, suitable for applications in areas such as commercial vehicles and heavy-duty trucks.

SCIENTIFIC REPORTS (2021)

Review Energy & Fuels

Post-lithium-ion battery cell production and its compatibility with lithium-ion cell production infrastructure

Fabian Duffner et al.

Summary: This review highlights the current production status of representative PLIBs and the advantages of lithium-ion batteries as advanced electrochemical energy storage technology. It also discusses the research and manufacturing processes of post-lithium technologies.

NATURE ENERGY (2021)

Article Chemistry, Physical

Impact of Crystal Density on the Electrochemical Behavior of Lithium-Ion Anode Materials: Exemplary Investigation of (Fe-Doped) GeO2

Tobias Eisenmann et al.

Summary: The impact of crystal structure on lithium battery active materials varies depending on the type of material, with insertion-type materials being particularly sensitive. By studying the electrochemical behavior of different crystal structures, it was found that starting from a low-density crystal structure can greatly enhance the reversibility of lithiation reactions. The introduction of iron further stabilizes this low-density phase and increases the contribution of reconversion reactions to reversible capacity.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Review Chemistry, Physical

A Brief Review on Solid Electrolyte Interphase Composition Characterization Technology for Lithium Metal Batteries: Challenges and Perspectives

Xinyi Shan et al.

Summary: Lithium metal batteries (LMB) are considered as the most promising high-energy-density energy storage devices, but their commercial applications are hindered by poor cycling stability and safety concerns. Solid electrolyte interphase (SEI) plays a dominant role in regulating Li deposition and overall performance of LMBs, but its composition and evolution are still elusive. Advanced characterization methods and monitoring techniques are urgently needed to address these issues. This perspective introduces the development history of SEI research, formation mechanisms, advanced technologies for SEI characterization and monitoring, and proposes future investigation directions.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Article Chemistry, Multidisciplinary

Supercritical CO2 Synthesis of Freestanding Se1-xSx Foamy Cathodes for High-Performance Li-Se1-xSx Battery

Chengwei Lu et al.

Summary: Selenium-sulfur solid solutions have been proposed as promising cathodic materials for high-performance lithium batteries, with a specially designed freestanding cathode providing spatial confinement for the solid solution and a highly conductive framework to facilitate ion/electron transport. The Se/S ratio of the solid solution plays a crucial role in the electrochemical performance, and the NC@SWCNTs@Se0.2S0.8 cathode shows excellent cyclic stability and rate capability in carbonate-based electrolyte.

FRONTIERS IN CHEMISTRY (2021)

Article Chemistry, Physical

A high performance all-vanadate-based Li-ion full cell

Jie Xu et al.

Summary: The scalable spray drying approach is used to design and synthesize state-of-the-art Li3VO4/N doped C porous microspheres, which exhibit ultra-high capacity, ultra-long cycle life, and remarkable rate capability. The electrode can deliver stable cycling over 5000 cycles at a high discharge current, and the reversible capacity is completely restored after 150 cycles of rate performance testing at different discharge currents.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Multidisciplinary

A Hierarchical Copper Oxide-Germanium Hybrid Film for High Areal Capacity Lithium Ion Batteries

Liying Deng et al.

FRONTIERS IN CHEMISTRY (2020)

Editorial Material Multidisciplinary Sciences

A retrospective on lithium-ion batteries

Jing Xie et al.

NATURE COMMUNICATIONS (2020)

Editorial Material Multidisciplinary Sciences

Prospects for lithium-ion batteries and beyond-a 2030 vision

Clare P. Grey et al.

NATURE COMMUNICATIONS (2020)

Article Chemistry, Multidisciplinary

Boosting Coulombic Efficiency of Conversion-Reaction Anodes for Potassium-Ion Batteries via Confinement Effect

Kangzhe Cao et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Review Chemistry, Multidisciplinary

Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries

Feixiang Wu et al.

CHEMICAL SOCIETY REVIEWS (2020)

Article Materials Science, Multidisciplinary

Amorphous germanium oxide nanobubbles for lithium-ion battery anode

Seh-Yoon Lim et al.

MATERIALS RESEARCH BULLETIN (2019)

Review Chemistry, Physical

Vanadate-Based Materials for Li-Ion Batteries: The Search for Anodes for Practical Applications

Shibing Ni et al.

ADVANCED ENERGY MATERIALS (2019)

Article Chemistry, Multidisciplinary

Li-N2 Batteries: A Reversible Energy Storage System?

Zhang Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Chemistry, Multidisciplinary

GeO2 Encapsulated Ge Nanostructure with Enhanced Lithium-Storage Properties

Shancheng Yan et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Physical

Reversible conversion reaction of GeO2 boosts lithium-ion storage via Fe doping

Junxiu Wu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Chemistry, Physical

3D Hierarchical Core-Shell Nanostructured Arrays on Carbon Fibers as Catalysts for Direct Urea Fuel Cells

N. Senthilkumar et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Multidisciplinary

Engineered Tubular Nanocomposite Electrocatalysts Based on CuS for High-Performance, Durable Glucose Fuel Cells and Their Stack

G. Siva et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Article Electrochemistry

Uniform coaxial CNT@Li2MnSiO4@C as advanced cathode material for lithium-ion battery

Tao Peng et al.

ELECTROCHIMICA ACTA (2018)

Article Chemistry, Physical

Electrospun C/GeO2 paper-like electrodes for flexible Li-ion batteries

Fabiola Panto et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Nanoscience & Nanotechnology

Reinforcing Germanium Electrode with Polymer Matrix Decoration for Long Cycle Life Rechargeable Lithium Ion Batteries

Xiaolei Sun et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Electrochemistry

Metal-organic frameworks derived germanium oxide nanosheets for large reversible Li-ion storage

Wenbo Zhang et al.

ELECTROCHEMISTRY COMMUNICATIONS (2017)

Article Chemistry, Multidisciplinary

Electrospinning of GeO2-C fibers and electrochemical application in lithium-ion batteries

Qi Yang et al.

CHINESE CHEMICAL LETTERS (2016)

Article Chemistry, Physical

Heterostructure composites of rGO/GeO2/PANI with enhanced performance for Li ion battery anode material

Sumanta Sarkar et al.

JOURNAL OF POWER SOURCES (2016)

Article Nanoscience & Nanotechnology

Amorphous GeOx-Coated Reduced Graphene Oxide Balls with Sandwich Structure for Long-Life Lithium-Ion Batteries

Seung Ho Choi et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Chemistry, Multidisciplinary

Mesoporous Ge/GeO2/Carbon Lithium-Ion Battery Anodes with High Capacity and High Reversibility

Jongkook Hwang et al.

ACS NANO (2015)

Article Chemistry, Physical

Highly stable GeOx@C core-shell fibrous anodes for improved capacity in lithium-ion batteries

Meng Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Article Chemistry, Physical

Ultrahigh volumetric capacity lithium ion battery anodes with CNT-Si film

Xinghui Wang et al.

NANO ENERGY (2014)

Article Chemistry, Physical

Synthesis of hollow GeO2 nanostructures, transformation into Ge@C, and lithium storage properties

Li Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Article Chemistry, Multidisciplinary

Synthesis and electrochemical properties of SnS as possible anode material for lithium batteries

G. Gnana Kumar et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2012)