☆ 4.7 Article

Three-dimensional interconnected porous carbon nanoflakes with improved electron transfer and ion storage for lithium-ion batteries

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Constructing N-doping biomass-derived carbon with hierarchically porous architecture to boost fast reaction kinetics for higfh-performance lithium storage

Dong Zeng et al.

Summary: This study demonstrates a novel and effective strategy of dual system activation process to construct the nitrogen-doped biomass-derived carbon with hierarchically porous architecture, which improves conductivity, facilitates charge transfer, and decreases diffusion path for lithium-ion transport. The electrode displays a high lithium-ion storage capacity and superior stability, while the assembled asymmetric lithium-ion capacitor exhibits excellent cycling stability and delivers a high power density. This dual system activation strategy may inspire the reasonable design of new generation progressive carbon-based electrodes for high-performance lithium storage devices.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Engineering, Environmental

Edge-enrich N-doped graphitic carbon: Boosting rate capability and cyclability for potassium ion battery

Bo Wang et al.

Summary: This study investigates nitrogen-doped graphitic carbon materials as anodes for potassium-ion batteries. The researchers found that a high edge-N doping ratio increases active sites and promotes capacitive-controlled K-storage. They also discovered that the N-5 configuration has a significant effect on interlayer spacing. The resulting ENGC-850 electrode exhibits high capacity, excellent rate capability, and prolonged cycle lifespan.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Enhanced electron transfer and ion storage in phosphorus/nitrogen co-doped 3D interconnected carbon nanocage toward potassium-ion battery

Fei Yuan et al.

Summary: The P/N co-doped three-dimensional interconnected carbon nanocage provides abundant active sites and intercalation space, resulting in exceptional ion storage performance.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Highly efficient conversion of waste plastic into thin carbon nanosheets for superior capacitive energy storage

Xiaoguang Liu et al.

Summary: The combined catalyst of ferrocene and sulfur has successfully achieved the highly efficient carbonization of waste polypropylene into carbon nanosheets, resulting in high carbon yield and thin thickness. The activated carbon nanosheets exhibit a well-defined hierarchical porous structure with large specific surface area and pore volume, delivering excellent electrode performance and high energy density in the fabricated symmetric supercapacitor.

CARBON (2021)

Add to Collection

Article Chemistry, Physical

N/O double-doped biomass hard carbon material realizes fast and stable potassium ion storage

Mengmeng Yang et al.

Summary: N/O co-doped cage-type biomass carbon (NOBC) prepared in this study exhibited superhigh long-cycling performance and rate performance as the anode of a potassium ion battery. The excellent performance can be attributed to the unique structure, internal 3D carbon network, and N/O co-doping, contributing to high reversible capacity even at high current densities. The pseudo-capacitance mechanism and N/O double doping were crucial in promoting K ion adsorption and improving conductivity in NOBC materials.

CARBON (2021)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Nitrogen-rich graphene aerogel with interconnected thousand-layer pancake structure as anode for high performance of lithium-ion batteries

Guiyun Yi et al.

Summary: Nitrogen-rich graphene aerogel with interconnected thousand-layer pancake structure (NTLP) was successfully synthesized through a hydrothermal template self-assembly method. NTLP exhibits significantly improved electrochemical performance for lithium-ion storage, with high reversible capacity, favorable rate capability, and long cycle life, attributed to its unique structure and nitrogen-doping.

JOURNAL OF SOLID STATE CHEMISTRY (2021)

Add to Collection

Article Chemistry, Applied

Multi-heteroatom doped porous carbon derived from insect feces for capacitance-enhanced sodium-ion storage

Chen Chen et al.

Summary: In this study, multi-heteroatom self-doped hierarchical porous carbon (HHPC) with a honeycomb-like structure was prepared as an anode for sodium ion batteries. The HHPC exhibited excellent electrochemical performance, showing potential for practical applications in the field of energy storage.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Electrochemistry

Spanish-dagger shaped CoP blooms decorated N-doped carbon branch anode for high-performance lithium and sodium storage

Huilan Sun et al.

Summary: The study designed and synthesized a multi-hierarchy structure of Spanish-dagger shaped CoP nanosheets decorated carbon sponge (CoP/CS) to address the electrochemical performance issues of transition metal phosphide in lithium and sodium-ion batteries. The composite exhibited impressive capacity, outstanding rate performance, and excellent cycling stability in both LIBs and SIBs.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Electrochemistry

Regulating the interfacial behavior of carbon nanotubes for fast lithium storage

Guanjia Zhu et al.

Summary: Carbon nanotubes (CNTs) have diverse interfacial characters that may affect their roles in the lithiation/delithiation process, and engineering the interface of CNTs can significantly impact lithium storage behavior. Boron-doped carbon nanotubes (B-CNT) show excellent fast charging capabilities and long cycling stability, with pseudo-capacitance dominated mechanisms leading to faster electron/ion transport kinetics. These findings provide valuable insights for the design of high-rate batteries using CNT-based composite electrode materials.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Energy & Fuels

Petroleum Coke as an Efficient Single Carbon Source for High-Energy and High-Power Lithium-Ion Capacitors

Pavan S. Veluri et al.

Summary: Petroleum coke can serve as a carbon source to synthesize high-performance electrode materials for lithium-ion capacitors, demonstrating excellent energy density, power density, and lifespan, with broad commercial applications.

ENERGY & FUELS (2021)

Add to Collection

Article Chemistry, Physical

Enhanced reversibility and cyclic stability of biomass-derived silicon/carbon anode material for lithium-ion battery

Lixia Liao et al.

Summary: Silicon as an anode material for lithium ion batteries has high theoretical capacity but poor cycling performance, while coupling with N-doped carbon can improve cycling stability. Prelithiation can boost initial coulombic efficiency, maintain structural integrity, and form stable SEI film, leading to higher reversible capacity.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Amorphous carbon/graphite coupled polyhedral microframe with fast electronic channel and enhanced ion storage for potassium ion batteries

Bo Wang et al.

Summary: The N-doped amorphous carbon/graphite coupled polyhedral microframe (NCM) serves as an advanced anode for potassium-ion batteries (KIBs), offering improved rate, capacity, and stability with high reversible capacity, outstanding rate property, and superb cycling performance. The electrode also demonstrates large energy density and good cycling stability when assembled into a K-ion full cell with potassium Prussian blue (KPB).

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Three dimensional graphene/carbonized metal-organic frameworks based high-performance supercapacitor

Xiaoze Shi et al.

CARBON (2020)

Add to Collection

Article Engineering, Environmental

FeS2 nanoparticles embedded in N/S co-doped porous carbon fibers as anode for sodium-ion batteries

Zhenxiao Lu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

Effect of Intrinsic Defects of Carbon Materials on the Sodium Storage Performance

Ruiqi Guo et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Energy & Fuels

Porous silicon-graphene-carbon composite as high performance anode material for lithium ion batteries

Yuehua Huang et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Article Chemistry, Physical

Nitrogen-rich porous carbon in ultra-high yield derived from activation of biomass waste by a novel eutectic salt for high performance Li-ion capacitors

Kaixiang Zou et al.

CARBON (2020)

Add to Collection

Article Chemistry, Physical

Cavity containing core-shell Bi@C nanowires toward high performance lithium ion batteries

Zhan Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Chemistry, Analytical

Synthesis of pomegranate-structured Si/C microspheres using P123 as surfactant for high-energy lithium-ion batteries

Bo Wang et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

High-performance potassium ion capacitors enabled by hierarchical porous, large interlayer spacing, active site rich-nitrogen, sulfur Co-doped carbon

Binbin Fan et al.

CARBON (2020)

Add to Collection

Article Chemistry, Physical

Silicon cages with tailored mesopores as anodes for high rate performance lithium ion batteries

Bo Long et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Electrochemistry

Multi-forks hierarchical porous amorphous carbon with N-Doping for high-performance potassium-ion batteries

Bo Wang et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Chemistry, Physical

Rational formation of solid electrolyte interface for high-rate potassium ion batteries

Bo Wang et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A general approach towards carbonization of plastic waste into a well-designed 3D porous carbon framework for super lithium-ion batteries

Jiakang Min et al.

CHEMICAL COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Physical

Hierarchical N-doped hollow carbon microspheres as advanced materials for high-performance lithium-ion capacitors

Jiangmin Jiang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Engineering, Environmental

Large-scale template-free synthesis of nitrogen-doped 3D carbon frameworks as low-cost ultra-long-life anodes for lithium-ion batteries

Jianren Wang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Oxygen/Fluorine Dual-Doped Porous Carbon Nanopolyhedra Enabled Ultrafast and Highly Stable Potassium Storage

Jian Lu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Biomass porous carbon derived from jute fiber as anode materials for lithium-ion batteries

Yanli Dou et al.

DIAMOND AND RELATED MATERIALS (2019)

Add to Collection

Article Engineering, Environmental

Synthesis of a novel porous silicon microsphere@carbon core-shell composite via in situ MOF coating for lithium ion battery anodes

Kai Wang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Chemistry, Physical

Nitrogen/oxygen co-doped mesoporous carbon octahedrons for high-performance potassium-ion batteries

Guoliang Xia et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

High-throughput fabrication of 3D N-doped graphenic framework coupled with Fe3C@porous graphite carbon for ultrastable potassium ion storage

Kun Han et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

N-doped porous hard-carbon derived from recycled separators for efficient lithium-ion and sodium-ion batteries

Yong Wang et al.

SUSTAINABLE ENERGY & FUELS (2019)

Add to Collection

Article Chemistry, Physical

Ultra-thin Fe3C nanosheets promote the adsorption and conversion of polysulfides in lithium-sulfur batteries

Huanxin Li et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ High-Level Nitrogen Doping into Carbon Nanospheres and Boosting of Capacitive Charge Storage in Both Anode and Cathode for a High-Energy 4.5 V Full-Carbon Lithium-Ion Capacitor

Fei Sun et al.

NANO LETTERS (2018)

Add to Collection

Article Electrochemistry

Nanostructured Antimony/carbon Composite Fibers as Anode Material for Lithium-ion Battery

Hailong Lv et al.

ELECTROCHIMICA ACTA (2015)

Add to Collection

Article Engineering, Environmental

Effect of pyrolysis temperature on carbon obtained from green tea biomass for superior lithium ion battery anodes

Sang-Wook Han et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Add to Collection

Article Engineering, Environmental

N-doped graphene/Fe-Fe3C nano-composite synthesized by a Fe-based metal organic framework and its anode performance in lithium ion batteries

Yanlei Tan et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Add to Collection

Article Multidisciplinary Sciences

Three-dimensional strutted graphene grown by substrate-free sugar blowing for high-power-density supercapacitors

Xuebin Wang et al.

NATURE COMMUNICATIONS (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.