Related references
Note: Only part of the references are listed.Influence of Fly Ash and Emery based particulate reinforced AA7075 surface composite processed through friction stir processing
K. Suganeswaran et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2022)
Assessment of erosion rate on AA7075 based surface hybrid composites fabricated through friction stir processing by taguchi optimization approach
Suganeswaran Kandasamy et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2022)
Consequence of reinforced SiC particles on microstructural and mechanical properties of AA6061 surface composites by multi-pass FSP
Husain Mehdi et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2022)
Influence of carbide ceramic reinforcements in improving tribological properties of A333 graded hybrid composites
Manu Sam et al.
DEFENCE TECHNOLOGY (2022)
Effects of tool pin profile and feed rate on wear performance of pine leaf ash/Al composite prepared by friction stir processing
Manoj Kumar Gupta
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2021)
Influence of secondary phase particles Al2O3/SiC on the microstructure and tribological characteristics of AA7075-based surface hybrid composites tailored using friction stir processing
K. Suganeswaran et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)
Mechanical and wear performance of Al/SiC surface composite prepared through friction stir processing
Ravi Butola et al.
MATERIALS RESEARCH EXPRESS (2021)
Optimizing turning parameters in the machining of AM alloy using Taguchi methodology
Sunil Dutta et al.
MEASUREMENT (2021)
MULTI-RESPONSE OPTIMIZATION OF END-MILLING PARAMETERS FOR INCONEL 625 USING TAGUCHI COUPLED WITH TOPSIS
Mohanraj Thangamuthu et al.
SURFACE REVIEW AND LETTERS (2021)
Process parameter optimization for the magnetic abrasive finishing of SS310s steel
Kandhasamy Suganeswaran et al.
MATERIALS TESTING (2020)
Corrosion behavioral studies on AA7075 surface hybrid composites tailored through friction stir processing
Suganeswaran Kandasamy et al.
ANTI-CORROSION METHODS AND MATERIALS (2020)
Effect of amount of TiB2 and B4C particles on tribological behavior of Al7075/B4C/TiB2 mono and hybrid surface composites produced by friction stir processing
Farshid Karpasand et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Influence of Friction Stir Processing on Weld Temperature Distribution and Mechanical Properties of TIG-Welded Joint of AA6061 and AA7075
Husain Mehdi et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2020)
Formation of Self-Assembled Monolayer and Characterization of AA7075-T6/B4C Nano-ceramic surface composite using Friction Stir Processing
Ravi Butola et al.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2020)
Statistical modelling and optimization of friction stir processing of A390-10 wt% SiC compo-cast composites
Javad Mohamadigangaraj et al.
MEASUREMENT (2020)
Friction stir process: a green fabrication technique for surface composites-a review paper
Manoj Kumar Gupta
SN APPLIED SCIENCES (2020)
Analysis of tribological behavior of Al/Gr/MoS2 surface composite fabricated by friction stir process
Manoj Kumar Gupta
CARBON LETTERS (2020)
Effect of Friction Stir Processing on Microstructure and Mechanical Properties of TIG Welded Joint of AA6061 and AA7075
Husain Mehdi et al.
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2020)
Synthesis and machining characteristics of novel TiC ceramic and MoS2 soft particulate reinforced aluminium alloy 7075 matrix composites
Anvesh Dhulipalla et al.
MANUFACTURING LETTERS (2020)
Mechanical and tribological properties of LM13/TiO2/MoS2 hybrid metal matrix composite synthesized by stir casting
R. Jojith et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2019)
Effect of friction stir process parameters on the mechanical properties of 5005-H34 and 7075-T651 aluminium alloys
R. Abrahams et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of filler material and post process ageing treatment on microstructure, mechanical properties and wear behaviour of friction stir processed AA 7075 surface composites
H. A. Deore et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Multi-response optimization of friction stir welding process parameters for dissimilar joining of Al6101 to pure copper using standard deviation based TOPSIS method
Nidhi Sharma et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2019)
Investigations on micro hardness, electrical and thermal conductivity of AA7075 surface hybrid composites produced through friction stir processing
K. Suganeswaran et al.
MATERIALS RESEARCH EXPRESS (2019)
Characterization of pine needle ash particulates reinforced surface composite fabricated by friction stir process
Gupta Manoj Kumar et al.
MATERIALS RESEARCH EXPRESS (2019)
Development of surface composite based on Al-Cu system by friction stir processing: Evaluation of microstructure, formation mechanism and wear behavior
Guoqiang Huang et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Microstructure, Hardness and Impact Toughness of Heat-Treated Nanodispersed Surface and Friction Stir-Processed Aluminum Alloy AA7075
M. Refat et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)
An Experimental Investigation for Multi-Response Optimization of Friction Stir Process Parameters During Fabrication of AA6061/B4Cp Composites
M. Puviyarasan et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2015)
Taguchi optimization of process parameters in friction stir processing of pure Mg
D. Ahmadkhaniha et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2015)
Enhancement of wear and ballistic resistance of armour grade AA7075 aluminium alloy using friction stir processing
I. Sudhakar et al.
DEFENCE TECHNOLOGY (2015)
Prediction of cutting tool life based on Taguchi approach with fuzzy logic and support vector regression techniques
Jaganathan Gokulachandran et al.
INTERNATIONAL JOURNAL OF QUALITY & RELIABILITY MANAGEMENT (2015)
Fabrication and characterization of functionally graded Al-SiC nanocomposite by using a novel multistep friction stir processing
Mojtaba Salehi et al.
MATERIALS & DESIGN (2014)
Optimization of friction stir welding process parameters to maximize tensile strength of stir cast AA6061-T6/AlNp composite
B. Ashok Kumar et al.
MATERIALS & DESIGN (2014)
Microstructure and mechanical properties of friction stir welded 18Cr-2Mo ferritic stainless steel thick plate
Jian Han et al.
MATERIALS & DESIGN (2014)
Characterization of friction stir welded boron carbide particulate reinforced AA6061 aluminum alloy stir cast composite
K. Kalaiselvan et al.
MATERIALS & DESIGN (2014)
Exploring the effects of SiC reinforcement incorporation on mechanical properties of friction stir welded 7075 aluminum alloy: Fatigue life, impact energy, tensile strength
Mohsen Bahrami et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Influence of Al2O3 particles on the microstructure and mechanical properties of copper surface composites fabricated by friction stir processing
L. Suvarna Raju et al.
DEFENCE TECHNOLOGY (2014)
Effect of dual reinforced ceramic particles on high temperature tribological properties of aluminum composites
Suresh Kumar et al.
CERAMICS INTERNATIONAL (2013)
The effect of process parameters on microstructural characteristics of AZ91/SiO2 composite fabricated by FSP
D. Khayyamin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Wear and mechanical properties of 6061-T6 aluminum alloy surface hybrid composites [(SiC+Gr) and (SiC+Al2O3)] fabricated by friction stir processing
Devaraju Aruri et al.
Journal of Materials Research and Technology-JMR&T (2013)
Mechanical and dry sliding wear behavior of Al7075 alloy-reinforced with SiC particles
G. B. Veeresh Kumar et al.
JOURNAL OF COMPOSITE MATERIALS (2012)
Investigating effects of process parameters on microstructural and mechanical properties of Al5052/SiC metal matrix composite fabricated via friction stir processing
A. Dolatkhah et al.
MATERIALS & DESIGN (2012)
Optimization of process parameters for producing AA6061/SiC nanocomposites by friction stir processing
M. Salehi et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
Iron-containing intermetallic phases in Al-Si based casting alloys
John A. Taylor
11TH INTERNATIONAL CONGRESS ON METALLURGY & MATERIALS SAM/CONAMET 2011 (2012)
Relationship between process parameters and mechanical properties of friction stir processed AA6063-T6 aluminum alloy
L. Karthikeyan et al.
MATERIALS & DESIGN (2011)
Microstructure and tribological performance of an aluminium alloy based hybrid composite produced by friction stir processing
S. A. Alidokht et al.
MATERIALS & DESIGN (2011)
Effect of rotational speed and probe profile on microstructure and hardness of AZ31/Al2O3 nanocomposites fabricated by friction stir processing
M. Azizieh et al.
MATERIALS & DESIGN (2011)
On the role of processing parameters in producing Cu/SiC metal matrix composites via friction stir processing: Investigating microstructure, microhardness, wear and tensile behavior
Mohsen Barmouz et al.
MATERIALS CHARACTERIZATION (2011)
Strength and toughness tradeoffs for an ultrafine-grain size ferrite/cementite steel produced by warm-rolling and annealing
Ming-Chun Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
On the role of process variables in the friction stir processing of cast aluminum A319 alloy
L. Karthikeyan et al.
MATERIALS & DESIGN (2010)
Optimization of the friction-stir-welding process and tool parameters to attain a maximum tensile strength of AA7075-T-6 aluminium alloy
S. Rajakumar et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2010)
Wear characteristics of surface-hybrid-MMCs layer fabricated on aluminum plate by friction stir processing
Essam R. I. Mahmoud et al.
WEAR (2010)
Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC
Tamer Ozben et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Recrystallization mechanisms during friction stir welding/processing of aluminum alloys
T. R. McNelley et al.
SCRIPTA MATERIALIA (2008)
Effect of multiple-pass friction stir processing on microstructure and tensile properties of a cast aluminum-silicon alloy
ZY Ma et al.
SCRIPTA MATERIALIA (2006)
Friction stir welding and processing
RS Mishra et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
Grain structure formation during friction stir welding observed by the 'stop action technique'
PB Prangnell et al.
ACTA MATERIALIA (2005)
Evaluation of the microstructure and mechanical properties of friction stir welded 6005 aluminum alloy
WB Lee et al.
MATERIALS SCIENCE AND TECHNOLOGY (2003)
Share Paper
