4.6 Article

Influence of Oxygen Content on the Microstructure and Mechanical Properties of Hot Isostatically Pressed 30CrMnSiNi2A Ultra-High Strength Steel

Journal

JOM
Volume 74, Issue 9, Pages 3595-3606

Publisher

SPRINGER
DOI: 10.1007/s11837-022-05336-7

Keywords

-

Funding

  1. National Natural Science Foundation of China [51701242, 51931012]
  2. Natural Science Foundation of Hunan Province of China [2018JJ3648]

Ask authors/readers for more resources

This study investigates the impact of oxygen content on the microstructure and mechanical properties of ultra-high strength steel. The results show that the size of oxide inclusions increases with higher oxygen content, and the composition of inclusions in particle boundaries changes from Al-rich to Si-rich oxide. Tensile strength remains stable at around 1300 MPa with oxygen content of 200 ppm to 650 ppm, but decreases to 1200 MPa at 1700 ppm. Impact toughness of the steel deteriorates as the oxygen content exceeds 365 ppm.
Oxide inclusions introduced by oxygen on the raw powder surface play an important role in the material performance of powder metallurgy products. In this study, we report the effect of oxygen content in the powder on the microstructure and mechanical properties of hot isostatically pressed (HIPed) 30CrMnSiNi2A ultra-high strength steel (UHSS). The results indicate that, when there is more oxygen in-powder, the size of the oxide inclusions increases, and the prior particle boundaries (PPBs) become clearly visible. In addition, the main constituents of-inclusions in-PPBs changes from Al-rich oxide to Si-rich oxide. When the oxygen content increases from 200 ppm to 650 ppm, the tensile strength maintains a value about 1300 MPa, while with further increases in the oxygen content to 1700 ppm, it decreases to 1200 MPa. The impact toughness of steel is sensitive to the oxygen content in the powder, and it deteriorates as the oxygen content goes above 365 ppm. Our findings not only clarify the influence of the oxygen content in raw powders on the mechanical properties of HIPed UHSS but also shed light on the formation mechanism of PPBs and their evolution, such as oxide size, morphology, species, etc., during sintering.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available