Related references
Note: Only part of the references are listed.Cohesive GTN model for ductile fracture simulation
Noe Brice Nkoumbou Kaptchouang et al.
ENGINEERING FRACTURE MECHANICS (2021)
Efficient parameters identification of a modified GTN model of ductile fracture using machine learning
Dong Chen et al.
ENGINEERING FRACTURE MECHANICS (2021)
Formability prediction using bifurcation criteria and GTN damage model
Muhammad Waqar Nasir et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Numerical implementation of a non-local GTN model for explicit FE simulation of ductile damage and fracture
Sondre Bergo et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)
The modified GTN-Thomason criterion for modelling of ductile fracture considering shear factor and size effect in micro-scaled plastic deformation
W. T. Li et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
An analysis of Lode effects in ductile failure
M. E. Torki et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2021)
Crack initiation and propagation in small-scale yielding using a nonlocal GTN model
Youbin Chen et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Experimental Investigation of GTN model parameters of 6061 Al alloy
R. A. Yildiz et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2020)
An extended GTN model for low stress triaxiality and application in spinning forming
He Wu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
An iterative analytical model for heterogeneous materials homogenization
D. Batache et al.
COMPOSITES PART B-ENGINEERING (2018)
Determination of the RVE size for polycrystal metals to predict monotonic and cyclic elastoplastic behavior: Statistical and numerical approach with new criteria
Moussa Bouchedjra et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2018)
Effective yield surface of porous media with random overlapping identical spherical voids
Abdellah Bourih et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2018)
Unit cell simulations and porous plasticity modelling for strongly anisotropic FCC metals
Lars Edvard Bryhni Daehli et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2017)
New analytic criterion for porous solids with pressure insensitive matrix
Oana Cazacu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Effective thermal and mechanical properties of randomly oriented short and long fiber composites
M. S. Sukiman et al.
MECHANICS OF MATERIALS (2017)
Failure of metals I: Brittle and ductile fracture
A. Pineau et al.
ACTA MATERIALIA (2016)
Modeling of the effect of particles size, particles distribution and particles number on mechanical properties of polymer-clay nano-composites: Numerical homogenization versus experimental results
Y. Djebara et al.
COMPOSITES PART B-ENGINEERING (2016)
A homogenization based yield criterion for a porous Tresca material with ellipsoidal voids
A. Mbiakop et al.
INTERNATIONAL JOURNAL OF FRACTURE (2016)
A unified criterion for the growth and coalescence of microvoids
Leo Morin et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)
On the effect of inclusion shape on effective thermal conductivity of heterogeneous materials
W. Kaddouri et al.
MECHANICS OF MATERIALS (2016)
Effective transverse elastic properties of unidirectional fiber reinforced composites
D. Beicha et al.
MECHANICS OF MATERIALS (2016)
Computational thermal conductivity in porous materials using homogenization techniques: Numerical and statistical approaches
A. El Moumen et al.
COMPUTATIONAL MATERIALS SCIENCE (2015)
A computational homogenization of random porous media: Effect of void shape and void content on the overall yield surface
Younis-Khalid Khdir et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2015)
Effect of reinforcement shape on physical properties and representative volume element of particles-reinforced composites: Statistical and numerical approaches
A. El Moumen et al.
MECHANICS OF MATERIALS (2015)
A multiscale approach and microstructure design of the elastic composite behavior reinforced with natural particles
A. El Moumen et al.
COMPOSITES PART B-ENGINEERING (2014)
Computational homogenization of plastic porous media with two populations of voids
Younis-Khalid Khdir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Computation of effective behavior of isotropic transverse composite in nonlinear problems
A. Benhizia et al.
MECHANICS RESEARCH COMMUNICATIONS (2014)
Numerical studies of porous ductile materials containing arbitrary ellipsoidal voids - I: Yield surfaces of representative cells
Komlanvi Madou et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2013)
Numerical studies of porous ductile materials containing arbitrary ellipsoidal voids II: Evolution of the length and orientation of the void axes
Komlanvi Madou et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2013)
Computational homogenization of elastic-plastic composites
Y. K. Khdir et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)
Computational homogenization of elasto-plastic porous metals
Felix Fritzen et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
A Gurson-type criterion for porous ductile solids containing arbitrary ellipsoidal voids-II: Determination of yield criterion parameters
Komlanvi Madou et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2012)
Bounds for nonlinear composites via iterated homogenization
P. Ponte Castaneda
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2012)
A Gurson-type criterion for porous ductile solids containing arbitrary ellipsoidal voids-I: Limit-analysis of some representative cell
Komlanvi Madou et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2012)
Dual-stage nested homogenization for rate-dependent anisotropic elasto-plasticity model of dendritic cast aluminum alloys
Daniel Paquet et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2011)
Virtual improvement of ice cream properties by computational homogenization of microstructures
Toufik Kanit et al.
MECHANICS RESEARCH COMMUNICATIONS (2011)
Continuum Models of Ductile Fracture: A Review
J. Besson
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2010)
A modified Gurson model and its application to punch-out experiments
Ken Nahshon et al.
ENGINEERING FRACTURE MECHANICS (2009)
An analysis of Gurson model with parameters dependent on triaxiality based on unitary cells
G. Vadillo et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2009)
Analysis of ductile tearing using a local approach to fracture
R. Taktak et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2009)
Temperature dependent mechanical behaviour of PVDF: Experiments and numerical modelling
L. Laiarinandrasana et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
Damage of ductile materials deforming under multiple plastic or viscoplastic mechanisms
J. Besson
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
Modification of the Gurson Model for shear failure
K. Nahshon et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2008)
A ductile fracture analysis using a local damage model
N. Benseddiq et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2008)
A homogenization-based constitutive model for isotropic viscoplastic porous media
K. Danas et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2008)
A constitutive model for elastoplastic solids containing primary and secondary voids
D. Fabregue et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2008)
Bounds and estimates for the effective yield surface of porous media with a uniform or a nonuniform distribution of voids
Nicolas Bilger et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2007)
RVE-based studies on the coupled effects of void size and void shape on yield behavior and void growth at micron scales
ZH Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2006)
Combined effects of void shape and void-size oblate spheroidal microvoid embedded in infinite non-linear solid
ZH Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2005)
Effect of a nonuniform distribution of voids on the plastic response of voided materials: a computational and statistical analysis
N Bilger et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2005)
Anisotropic ductile fracture Part I: experiments
AA Benzerga et al.
ACTA MATERIALIA (2004)
Anisotropic ductile fracture Part II: theory
AA Benzerga et al.
ACTA MATERIALIA (2004)
Numerical methods for porous metals with deformation-induced anisotropy
N Aravas et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2004)
Determination of the size of the representative volume element for random composites: statistical and numerical approach
T Kanit et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)
Experiments and numerical approaches to ductile tearing in an 2024-T351 aluminium alloy
A Imad et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2003)
Micromechanics of coalescence in ductile fracture
AA Benzerga
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2002)
An extended model for void growth and coalescence
T Pardoen et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)
A complete Gurson model approach for ductile fracture
ZL Zhang et al.
ENGINEERING FRACTURE MECHANICS (2000)