Related references
Note: Only part of the references are listed.Optimal design of inerter-based isolators minimizing the compliance and mobility transfer function versus harmonic and random ground acceleration excitation
Marcial Baduidana et al.
JOURNAL OF VIBRATION AND CONTROL (2021)
Seismic mitigation performance of periodic foundations with inertial amplification mechanism considering superstructure-foundation interaction
Feifei Sun et al.
SMART MATERIALS AND STRUCTURES (2021)
Inertial amplification band-gap generation by coupling a levered mass with a locally resonant mass
Arnab Banerjee et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Sound transmission of acoustic metamaterial beams with periodic inertial amplification mechanisms
Yongzhen Mi et al.
JOURNAL OF SOUND AND VIBRATION (2021)
Enhanced seismic base isolation using inertial amplifiers
Sudip Chowdhury et al.
STRUCTURES (2021)
Three-Dimensional Base Isolation Using Vertical Negative Stiffness Devices
Gian Paolo Cimellaro et al.
JOURNAL OF EARTHQUAKE ENGINEERING (2020)
On the role of second gradient constitutive parameters in the static and dynamic analysis of heterogeneous media with micro-inertia effects
M. Ayad et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Dispersion characteristics of periodic structural systems using higher order beam element dynamics
M. Ayad et al.
MATHEMATICS AND MECHANICS OF SOLIDS (2020)
Negative stiffness devices for vibration isolation applications: A review
Huan Li et al.
ADVANCES IN STRUCTURAL ENGINEERING (2020)
Assessment of the vertical stiffness of elastomeric bearing due to displacement and rotation
Ehsan Kazeminezhad et al.
INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2020)
Simultaneous energy harvesting and vibration attenuation in piezo-embedded negative stiffness metamaterial
Ankur Dwivedi et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2020)
Bandgap enhancement of periodic nonuniform metamaterial beams with inertial amplification mechanisms
Shoaib Muhammad et al.
JOURNAL OF VIBRATION AND CONTROL (2020)
Optimal design based on analytical solution for storage tank with inerter isolation system
Yiyao Jiang et al.
SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2020)
Mechanics of beams made from chiral metamaterials: Tuning deflections through normal-shear strain couplings
N. Karathanasopoulos et al.
MATERIALS & DESIGN (2020)
Realization of an ultrawide stop band in a 2-D elastic metamaterial with topologically optimized inertial amplification mechanisms
Osman Yuksel et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Higher-gradient and micro-inertia contributions on the mechanical response of composite beam structures
M. Ayad et al.
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2020)
Energy dissipation mechanism of inerter systems
Zhipeng Zhao et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Waves in Structured Mediums or Metamaterials: A Review
Arnab Banerjee et al.
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2019)
Seismic isolation: Early history
Nicos Makris
EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2019)
Seismic response mitigation of a wind turbine tower using a tuned parallel inerter mass system
Ruifu Zhang et al.
ENGINEERING STRUCTURES (2019)
Multi-objective optimal design of inerter-based vibration absorbers for earthquake protection of multi-storey building structures
A. A. Taflanidis et al.
JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS (2019)
A nonlinear resonator with inertial amplification for very low-frequency flexural wave attenuations in beams
Jiaxi Zhou et al.
NONLINEAR DYNAMICS (2019)
Exact H2 optimal solutions to inerter-based isolation systems for building structures
Hongxin Sun et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2019)
Optimal parameters of viscoelastic tuned-mass dampers
A. Batou et al.
JOURNAL OF SOUND AND VIBRATION (2019)
A comparative study of vibration isolation performance using negative stiffness and inerter dampers
Xiang Shi et al.
JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS (2019)
Effect of inerter for seismic mitigation comparing with base isolation
Luyu Li et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2019)
Vibration fatigue study of the helical spring in the base-excited inerter-based isolation system
D. Cakmak et al.
ENGINEERING FAILURE ANALYSIS (2019)
Optimal design of an inerter isolation system considering the soil condition
Zhipeng Zhao et al.
ENGINEERING STRUCTURES (2019)
Optimal tuned inerter dampers for performance enhancement of vibration isolation
Feng Qian et al.
ENGINEERING STRUCTURES (2019)
Closed-form stochastic response of linear building structures to spectrum-consistent seismic excitations
Giorgio Barone et al.
SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2019)
Novel fluid inerter based tuned mass dampers for optimised structural control of base-isolated buildings
Dario De Domenico et al.
JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS (2019)
Efficient attenuation of beam vibrations by inertial amplification
Mateusz Barys et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2018)
Optimal design of a beam-based dynamic vibration absorber using fixed-points theory
Yingyu Hua et al.
JOURNAL OF SOUND AND VIBRATION (2018)
Influence of mechanical layout of inerter systems on seismic mitigation of storage tanks
Ruifu Zhang et al.
SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2018)
Integrated semi-active seat suspension for both longitudinal and vertical vibration isolation
Xian-Xu Bai et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2017)
Generating ultra wide vibration stop bands by a novel inertial amplification mechanism topology with flexure hinges
S. Taniker et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
Simplified Model and Energy Dissipation Characteristics of a Rectangular Liquid-Storage Structure Controlled with Sliding Base Isolation and Displacement-Limiting Devices
Xuansheng Cheng et al.
JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2017)
Comfort-oriented vehicle suspension design with skyhook inerter configuration
Yinlong Hu et al.
JOURNAL OF SOUND AND VIBRATION (2017)
Analytically optimal parameters of dynamic vibration absorber with negative stiffness
Yongjun Shen et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)
Simulation and optimization of magnetic negative stiffness dampers
Xiang Shi et al.
SENSORS AND ACTUATORS A-PHYSICAL (2017)
Shake table testing of un-reinforced brick masonry building test model isolated by U-FREI
Animesh Das et al.
EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2016)
Inertial amplification of continuous structures: Large band gaps from small masses
Niels M. M. Frandsen et al.
JOURNAL OF APPLIED PHYSICS (2016)
Design and experiment of a high-static-low-dynamic stiffness isolator using a negative stiffness magnetic spring
Yisheng Zheng et al.
JOURNAL OF SOUND AND VIBRATION (2016)
On the analysis of a high-static-low-dynamic stiffness vibration isolator with time-delayed cubic displacement feedback
Chun Cheng et al.
JOURNAL OF SOUND AND VIBRATION (2016)
Performance evaluation for inerter-based dynamic vibration absorbers
Yinlong Hu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)
Design, analysis and experimental investigation of three-dimensional structures with inertial amplification induced vibration stop bands
S. Taniker et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
The isolation characteristics of an archetypal dynamical model with stable-quasi-zero-stiffness
Zhifeng Hao et al.
JOURNAL OF SOUND AND VIBRATION (2015)
Shape optimization of phononic band gap structures incorporating inertial amplification mechanisms
Osman Yuksel et al.
JOURNAL OF SOUND AND VIBRATION (2015)
H∞ optimization of dynamic vibration absorber variant for vibration control of damped linear systems
Semin Chun et al.
JOURNAL OF SOUND AND VIBRATION (2015)
Analysis and optimisation for inerter-based isolators via fixed-point theory and algebraic solution
Yinlong Hu et al.
JOURNAL OF SOUND AND VIBRATION (2015)
A vibro-acoustic reduced order model using undeformed coupling interface substructuring - Application to rubber bushing isolation in vehicle suspension systems
Eskil Lindberg et al.
APPLIED ACOUSTICS (2014)
Vibration isolation characteristics of a nonlinear isolator using Euler buckled beam as negative stiffness corrector: A theoretical and experimental study
Xiuchang Huang et al.
JOURNAL OF SOUND AND VIBRATION (2014)
Analysis and experiment of a vibration isolator using a novel magnetic spring with negative stiffness
Wenjiang Wu et al.
JOURNAL OF SOUND AND VIBRATION (2014)
Analytical and Experimental Investigation of Buckled Beams as Negative Stiffness Elements for Passive Vibration and Shock Isolation Systems
Benjamin A. Fulcher et al.
JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2014)
Damping-adjusted combination rule for the response spectrum analysis of base-isolated buildings
Giuseppe Muscolino et al.
EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2013)
On the characteristics of a quasi-zero stiffness isolator using Euler buckled beam as negative stiffness corrector
Xingtian Liu et al.
JOURNAL OF SOUND AND VIBRATION (2013)
Phononic gaps induced by inertial amplification in BCC and FCC lattices
S. Taniker et al.
PHYSICS LETTERS A (2013)
Stability and performance analysis of a full-train system with inerters
Fu-Cheng Wang et al.
VEHICLE SYSTEM DYNAMICS (2012)
A vibration isolation system in low frequency excitation region using negative stiffness structure for vehicle seat
Thanh Danh Le et al.
JOURNAL OF SOUND AND VIBRATION (2011)
H-infinity optimization of a variant design of the dynamic vibration absorber-Revisited and new results
Y. L. Cheung et al.
JOURNAL OF SOUND AND VIBRATION (2011)
Theoretical investigation of the behavior of an acoustic metamaterial with extreme Young's modulus
H. H. Huang et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2011)
Semi-active variable stiffness vibration control of vehicle seat suspension using an MR elastomer isolator
Haiping Du et al.
SMART MATERIALS AND STRUCTURES (2011)
A hybrid electromagnetic shock absorber for active vehicle suspension systems
Babak Ebrahimi et al.
VEHICLE SYSTEM DYNAMICS (2011)
Theory of phononic gaps induced by inertial amplification in finite structures
C. Yilmaz et al.
PHYSICS LETTERS A (2010)
Parametric analysis of liquid storage tanks base isolated by curved surface sliding bearings
Emre Abali et al.
SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2010)
On the force transmissibility of a vibration isolator with quasi-zero-stiffness
A. Carrella et al.
JOURNAL OF SOUND AND VIBRATION (2009)
Theoretical design parameters for a quasi-zero stiffness magnetic spring for vibration isolation
Will S. Robertson et al.
JOURNAL OF SOUND AND VIBRATION (2009)
The performance improvements of train suspension systems with mechanical networks employing inerters
Fu-Cheng Wang et al.
VEHICLE SYSTEM DYNAMICS (2009)
Phononic band gaps induced by inertial amplification in periodic media
C. Yilmaz et al.
PHYSICAL REVIEW B (2007)
Static analysis of a passive vibration isolator with quasi-zero-stiffness characteristic
A. Carrella et al.
JOURNAL OF SOUND AND VIBRATION (2007)
Performance benefits in passive vehicle suspensions employing inerters
MC Smith et al.
VEHICLE SYSTEM DYNAMICS (2004)
Synthesis of mechanical networks: The inerter
MC Smith
IEEE TRANSACTIONS ON AUTOMATIC CONTROL (2002)
High performance vibration isolation using springs in Euler column buckling mode
J Winterflood et al.
PHYSICS LETTERS A (2002)
Analytical solutions to H∞ and H2 optimization of dynamic vibration absorbers attached to damped linear systems
T Asami et al.
JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2002)
Extreme damping in composite materials with negative-stiffness inclusions
RS Lakes et al.
NATURE (2001)