Related references
Note: Only part of the references are listed.Experimental study on the thermal performance of PCMs based heat sink using higher alcohol/graphite foam
Shisong Wang et al.
APPLIED THERMAL ENGINEERING (2021)
An experimental investigation of a PCM-based heat sink enhanced with a topology-optimized tree-like structure
J. Y. Ho et al.
ENERGY CONVERSION AND MANAGEMENT (2021)
Dissipating the heat generated in high-performance electronics using graphitic foam heat-sinks cooled with a dielectric liquid
Ahmed Alhusseny et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)
Study of the performance of an integrated liquid cooling heat sink for high-power IGBTs
Minqiang Pan et al.
APPLIED THERMAL ENGINEERING (2021)
Three-dimensional analysis of forced convection of Newtonian and non-Newtonian nanofluids through a horizontal pipe using single- and two-phase models
Naser Hazeri-Mahmel et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)
Introducing a novel heat sink comprising PCM and air - Adapted to electronic device thermal management
Rasool Kalbasi
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
Design and optimization of a liquid cooled heat sink for a motor inverter in electric vehicles
Feng Han et al.
APPLIED ENERGY (2021)
A comparison of parallel and colliding jet arrays in a compact vapour compression heat sink for electronics cooling
Marcus Vinicius P. Carneiro et al.
APPLIED THERMAL ENGINEERING (2021)
A hybrid vapor chamber heat sink incorporating a vapor chamber and liquid cooling channel with outstanding thermal performance and hydraulic characteristics
Huawei Wang et al.
ENERGY CONVERSION AND MANAGEMENT (2021)
Entropy and convection effect on magnetized hybrid nano-liquid flow inside a trapezoidal cavity with zigzagged wall
F. Mebarek-Oudina et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)
Recent advances in using nanofluids in renewable energy systems and the environmental implications of their uptake
Omid Mahian et al.
NANO ENERGY (2021)
Experimental investigation of natural convection heat transfer of SiO2/water nanofluid inside inclined enclosure
Maryam Torki et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)
A numerical investigation on the influence of nanoadditive shape on the natural convection and entropy generation inside a rectangle-shaped finned concentric annulus filled with boehmite alumina nanofluid using two-phase mixture model
Amin Shahsavar et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)
Cooling performance and space efficiency improvement based on heat sink arrangement for power conversion electronics
Youngchan Yoon et al.
APPLIED THERMAL ENGINEERING (2020)
Thermal-hydraulic analysis for alumina/water nanofluid inside a mini-channel heat sink with latent heat cooling ceiling-An experimental study
C. J. Ho et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)
Numerical analysis of natural convection in a differentially heated packed bed with non-uniform wall temperature
Manu Chakkingal et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
MHD mixed convection stagnation point flow of a hybrid nanofluid past a vertical flat plate with convective boundary condition
Nurul Amira Zainal et al.
CHINESE JOURNAL OF PHYSICS (2020)
Two-phase mixture simulation of the effect of fin arrangement on first and second law performance of a bifurcation microchannels heatsink operated with biologically prepared water-Ag nanofluid
Yulin Ma et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)
Nanoparticles enhanced phase change materials (NePCMs)-A recent review
Syeda Laraib Tariq et al.
APPLIED THERMAL ENGINEERING (2020)
Numerical assessment into the hydrothermal and entropy generation characteristics of biological water-silver nano-fluid in a wavy walled microchannel heat sink
Abdullah A. A. A. Al-Rashed et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)
CFD analysis of employing a novel ecofriendly nanofluid in a miniature pin fin heat sink for cooling of electronic components: Effect of different configurations
Mehdi Bahiraei et al.
ADVANCED POWDER TECHNOLOGY (2019)
Numerical investigation of forced convection heat transfer and flow irreversibility in a novel heatsink with helical microchannels working with biologically synthesized water-silver nano-fluid
Amin Shahsavar et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)
Multi-objective optimization of turbulent heat transfer flow in novel outward helically corrugated tubes
Wei Wang et al.
APPLIED THERMAL ENGINEERING (2018)
Numerical simulation of entropy generation due to unsteady natural convection in a semi-annular enclosure filled with nanofluid
Sonia Bezi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Effect of fin shape on the thermal performance of nanofluid-cooled micro pin-fin heat sinks
Tehmina Ambreen et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Hybrid nanofluids for heat transfer applications - A state-of-the-art review
Gabriela Huminic et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Natural convection heat transfer enhancement in new designs of plate-fin based heat sinks
S. Sadrabadi Haghighi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
A hierarchical manifold microchannel heat sink array for high-heat-flux two-phase cooling of electronics
Kevin P. Drummond et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
LBM simulation of free convection in a nanofluid filled incinerator containing a hot block
Mohamed Ammar Abbassi et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
A comprehensive review on rheological behavior of mono and hybrid nanofluids: Effective parameters and predictive correlations
Hossein Khodadadi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
A comprehensive study on heat transfer enhancement in microchannel heat sink with secondary channel
Wan Mohd Arif Aziz Japar et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2018)
Mixed convection of MHD flow in nanofluid filled and partially heated wavy walled lid-driven enclosure
Hakan F. Oztop et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2017)
Experimental analysis of energy and friction factor for titanium dioxide nanofluid in a water block heat sink
S. S. Khaleduzzaman et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Experimental evaluation of cooling performance of circular heat sinks for heat dissipation from electronic chips using nanofluid
Seyed Ebrahim Ghasemi et al.
MECHANICS RESEARCH COMMUNICATIONS (2017)
Numerical study on turbulent forced convective heat transfer using nanofluids TiO2 in an automotive cooling system
Adnan M. Hussein et al.
CASE STUDIES IN THERMAL ENGINEERING (2017)
Experimental study on the heat transfer of MWCNT/water nanofluid flowing in a car radiator
Guilherme Azevedo Oliveira et al.
APPLIED THERMAL ENGINEERING (2017)
MHD natural convection in an inclined wavy cavity with corner heater filled with a nanofluid
M. A. Sheremet et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2016)
Intensification of forced convection heat transfer using biological nanofluid in a double-pipe heat exchanger
M. M. Sarafraz et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2015)
An experimental study on the thermal and hydraulic performances of nanofluids flow in a miniature circular pin fin heat sink
Weerapun Duangthongsuk et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2015)
Multi-objective optimization of water-cooled pinfin heatsinks
Keisuke Horiuchi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Optimization and comparison of double-layer and double-side micro-channel heat sinks with nanofluid for power electronics cooling
Assel Sakanova et al.
APPLIED THERMAL ENGINEERING (2014)
Effect of different nanoparticle shapes on shell and tube heat exchanger using different baffle angles and operated with nanofluid
M. M. Elias et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
Study of forced convection nanofluid heat transfer in the automotive cooling system
Adnan M. Hussein et al.
CASE STUDIES IN THERMAL ENGINEERING (2014)
Effect of a magnetic field on natural convection in an inclined half-annulus enclosure filled with Cu-water nanofluid using CVFEM
M. Sheikholeslami et al.
ADVANCED POWDER TECHNOLOGY (2013)
Investigation of self-similar heat sinks for liquid cooled electronics
Flavio Brighenti et al.
APPLIED THERMAL ENGINEERING (2013)
Effect of nanoparticle shape on the heat transfer and thermodynamic performance of a shell and tube heat exchanger
M. M. Elias et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2013)
CFD modeling (comparing single and two-phase approaches) on thermal performance of Al2o3/water nanofluid in mini-channel heat sink
Mostafa Keshavarz Moraveji et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2013)
Application of nanofluids in computer cooling systems (heat transfer performance of nanofluids)
M. Rafati et al.
APPLIED THERMAL ENGINEERING (2012)
On the Cooling of Electronics With Nanofluids
W. Escher et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2011)
Experimental determination of thermal conductivity of three nanofluids and development of new correlations
Ravikanth S. Vajjha et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)
Review of convective heat transfer enhancement with nanofluids
Sadik Kakac et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)
Nanoparticle-enhanced phase change materials (NEPCM) with great potential for improved thermal energy storage
J. M. Khodadadi et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2007)