4.7 Article

Electrical, thermal, and H2O and CO2 poisoning behaviors of PrNi0.5Co0.5O3-d electrode for intermediate temperature protonic ceramic electrochemical cells

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

High-performing proton-conducting solid oxide fuel cells with triple-conducting cathode of Pr0.5Ba0.5(Co0.7Fe0.3)O3-δ tailored with W

Zetian Tao et al.

Summary: In this study, a series of W doped Pr0.5Ba0.5(Co0.7Fe0.3)O3-delta (PBCF) were prepared and characterized as cathodes for proton-conducting solid oxide fuel cell (H-SOFC). The enhancement of proton migration and formation ability through W doping significantly increases the cell performance, which was further verified by density functional theory (DFT) simulation, indicating that high valence element doping can be a potential approach for cathode design.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Multidisciplinary Sciences

Revitalizing interface in protonic ceramic cells by acid etch

Wenjuan Bian et al.

Summary: Researchers improved the electrochemical performance and stability of protonic ceramic fuel cells by acid treatment, enabling exceptional performance at lower temperatures.

NATURE (2022)

Article Engineering, Chemical

Fabrication and study of LaNi0.6Fe0.4O3-δ and Sm0.5Sr0.5CoO3-δ composite cathode for proton-conducting solid oxide fuel cells

Min Fu et al.

Summary: The new composite cathode material consisting of LaNi0.6Fe0.4O3-δ (LNF) and Sm0.5Sr0.5CoO3-δ (SSC), namely LNF-SSC73, shows promising electrochemical performance in proton-conducting solid oxide fuel cells, indicating its potential for improving fuel cell performance.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Chemistry, Physical

Proton-conducting ceramic fuel cells: Scale up and stack integration

Long Q. Le et al.

Summary: This study demonstrates the scaling up of proton-conducting ceramic fuel cells (PCFCs) into small, multi-cell stacks with reasonable performance and low degradation through material tuning, fabrication procedures, and operating condition adjustments. Specific materials such as the BCZYYb electrolyte and the BCFZY cathode, as well as packaging with ferritic-steel interconnects and macor frames, contribute to the long-term durability and performance of the fuel cell stacks.

JOURNAL OF POWER SOURCES (2021)

Article Multidisciplinary Sciences

Thermal-expansion offset for high-performance fuel cell cathodes

Yuan Zhang et al.

Summary: This study demonstrates an approach to achieving full thermo-mechanical compatibility between the cathode and other cell components for solid oxide fuel cells. By introducing a thermal-expansion offset and using reactive sintering to form a composite electrode, the research shows high activity and excellent stability of the electrode. The introduction of reactive negative-thermal-expansion components may provide a general strategy for developing fully compatible and highly active electrodes for SOFCs.

NATURE (2021)

Article Multidisciplinary Sciences

Improved mechanical strength, proton conductivity and power density in an 'all-protonic' ceramic fuel cell at intermediate temperature

Abul K. Azad et al.

Summary: The addition of Zn to protonic ceramic fuel cells improves their performance, while using the same proton conducting material for structural support offers mechanical advantages and enables high power density and proton conductivity, marking an important advancement towards commercially viable solid oxide fuel cell technology.

SCIENTIFIC REPORTS (2021)

Article Materials Science, Ceramics

PrBa0.5Sr0.5Co1.5Fe0.5O5+δ composite cathode in protonic ceramic fuel cells

Seunghyeok Im et al.

Summary: The study investigates the applicability of TCO material PBSCF in PCFCs, examining the chemical compatibility of PBSCF with BCZY3 proton-conducting electrolyte using XRD, and successfully fabricating PCFCs with low ohmic resistance and high electrochemical performance through optimization of sintering temperature and cathode thickness.

JOURNAL OF THE KOREAN CERAMIC SOCIETY (2021)

Article Chemistry, Physical

A highly efficient composite cathode for proton-conducting solid oxide fuel cells

Yunfei Bu et al.

JOURNAL OF POWER SOURCES (2020)

Review Physics, Applied

Proton-conducting oxides for energy conversion and storage

Chuancheng Duan et al.

APPLIED PHYSICS REVIEWS (2020)

Article Chemistry, Physical

Poisoning of Ni-Based anode for proton conducting SOFC by H2S, CO2, and H2O as fuel contaminants

Shichen Sun et al.

JOURNAL OF POWER SOURCES (2018)

Article Electrochemistry

Electrochemical Behaviors for Ag, LSCF and BSCF as Oxygen Electrodes for Proton Conducting IT-SOFC

Shichen Sun et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Article Physics, Condensed Matter

Thermal expansion of materials in the barium cerate-zirconate system

Yu G. Lyagaeva et al.

PHYSICS OF THE SOLID STATE (2015)

Article Multidisciplinary Sciences

Readily processed protonic ceramic fuel cells with high performance at low temperatures

Chuancheng Duan et al.

SCIENCE (2015)

Article Materials Science, Multidisciplinary

Synthesis and characterization of La0.6Sr0.4Co0.8Fe0.2O3 films for solid oxide fuel cell cathodes

K. Dumaisnil et al.

THIN SOLID FILMS (2014)

Article Chemistry, Physical

Cobalt-doped BaZrO3: A single phase air electrode material for reversible solid oxide cells

Yuanyuan Rao et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

Article Chemistry, Physical

PrNi0.6Co0.4O3-Ce0.8Sm0.2O1.9 composite cathodes for intermediate temperature solid oxide fuel cells

Shouguo Huang et al.

JOURNAL OF POWER SOURCES (2012)

Review Multidisciplinary Sciences

Lowering the Temperature of Solid Oxide Fuel Cells

Eric D. Wachsman et al.

SCIENCE (2011)

Article Chemistry, Physical

Proton conducting solid oxide fuel cells with layered PrBa0.5Sr0.5Co2O5+delta perovskite cathode

Hanping Ding et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

Article Chemistry, Physical

High Total Proton Conductivity in Large-Grained Yttrium-Doped Barium Zirconate

Yoshihiro Yamazaki et al.

CHEMISTRY OF MATERIALS (2009)

Article Electrochemistry

A novel single phase cathode material for a proton-conducting SOFC

Zetian Tao et al.

ELECTROCHEMISTRY COMMUNICATIONS (2009)

Article Chemistry, Physical

Mechanism of gas-solid exchange processes for some perovskites

IV Khromushin et al.

SOLID STATE IONICS (2003)

Article Chemistry, Physical

Preparation, chemical stability, and electrical properties of Ba(Ce1-xBix)O-3 (x=0.0-0.5)

Z Hui et al.

JOURNAL OF MATERIALS CHEMISTRY (2002)