4.7 Article

Local percolation of non-spherical particles in moving bed waste heat recovery unit for hydrogen production by methanol steam reforming

Journal

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
Volume 48, Issue 30, Pages 11463-11475

Publisher

PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.ijhydene.2022.04.219

Keywords

Hydrogen production; Moving bed; Discrete element method; Non-spherical particle; Segregation; Percolation

Ask authors/readers for more resources

This study used the discrete element method to simulate the local percolation of non-spherical particles in a moving bed waste heat recovery unit (MBWHRU) for hydrogen production. A local method was applied to determine the location and intensity of percolation, and percolation maps were presented. The study found that percolation mainly occurs at the bottom, flow mechanism transition region, and near the vertical segment wall, with the most intense percolation above the orifice. Percolation is not only related to velocity gradient but also closely related to changes in multiple parameters. Increasing the mass percentage and particle size of fine particles effectively avoids percolation, especially when the particle size ratio of fine particles to coarse particles is greater than 0.5. Percolation near the vertical segment wall is particularly sensitive to particle-wall friction (>0.45), and reducing particle-particle friction and wall roughness is also beneficial to hydrogen production.
To study the local percolation of non-spherical particles in a moving bed waste heat re-covery unit (MBWHRU) for hydrogen production, the discrete element method (DEM) was applied to simulate the discharge. A local method was applied to determine the location and local intensity of percolation. The percolation maps were presented. Moreover, the effects of structural parameters of MBWHRU, fine particle parameters, and friction pa-rameters on local percolation were also considered. Percolation mainly occurs at the bot-tom, flow mechanism transition region, and near the vertical segment wall. Among them, percolation above the orifice is the most intense. The velocity gradient (or shear) is not the only condition under which percolation occurs. Percolation is closely related to changes in multiple parameters. The effects of fine particle parameters and friction parameters rela-tive to structural parameters on percolation are significant. Percolation can be effectively avoided by increasing the mass percentage and particle size of fine particles, which is beneficial to hydrogen production. Especially, for the particle size ratio of fine particles to coarse particles greater than 0.5, percolation is no longer evident. The percolation near the vertical segment wall is particularly sensitive to particle-wall friction (>0.45). Reducing particle-particle friction and wall roughness is also beneficial to hydrogen production.(c) 2022 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available